Micropore characterization using the Dubinin-Astakhov equation to analyze high pressure CO2 (273 K) adsorption data

The characterization of the pore structure of microporous materials is of interest because of the usefulness of these materials in many applications. Of these, the characterization of carbon adsorbents is particularly problematic because of the presence of small pores with size on the order of small molecules (micropores) along with a wide distribution of pore sizes, and their non-crystalline structure. In this paper, we present results obtained using the Dubinin-Astakhov equation to analyze data from high pressure CO₂ adsorption at 273 K to characterize two sets of microporous carbons. Our results support the conclusions of previous workers that the Dubinin-Astakhov (DA) equation is able to linearize adsorption data that gives rise to curved Dubinin-Radushkevich plots. However, when applied over different ranges of relative pressure on the adsorption isotherm, the Dubinin-Astakhov plots result in different values of micropore volume and characteristic adsorption potential. Furthermore, DA analysis of CO₂ (273 K) adsorption data over a wide range of pressures (10^–3–22000 Tort), gives results different from DA analysis of CO₂ (273 K) isotherms measured at low pressures only (10^–3–830 Tort). It would appear desirable to apply the DA equation to data that reflects the entire range of micropore filling on the adsorption isotherm, as opposed to data over a limited relative pressure range. For CO₂ adsorption at 273 K, this would necessitate adsorption studies at high pressures, to about 28 atm. Micropore volumes obtained in this manner, agreed with the total pore volumes determined by nitrogen (77 K) adsorption for all the activated carbons studied.     

Reactive Laser Ablation Synthesis of Nanosize Aluminum Nitride

An aluminum (Al) target was laser ablated in a nitrogen (N₂) atmosphere, producing aluminum nitride (AlN) powder. These powders were calcined at 900°C for 2 h. Powders were produced at various nitrogen pressures, and the calcined powders were tested for unreacted aluminum content, using differential thermal analysis (DTA). The AlN powder, produced at a laser fluence of 12 J/cm² and a nitrogen pressure of 10.0 kPa (75 torr), showed no evidence of unreacted aluminum by DTA and was phase-pure AlN by X-ray diffraction (XRD). The surface area of this powder is 82 m²/g, corresponding to a particle size of ∼11 nm, which is in good agreement with TEM observations.     

Lipase-catalyzed synthesis and properties of estolides and their esters

Eight lipases were screened for their ability to synthesize estolides from a mixture that contained lesquerolic (14-hydroxy-11-eicosenoic) acid and octadecenoic acid. With the exception ofAspergillus niger lipase, all 1,3-specific enzymes (fromRhizopus arrhizus andRhizomucor miehei lipases) were unable to synthesize estolides.Candida rugosa andGeotrichum lipases catalyzed estolide formation at >40% yield, with >80% of the estolide formed being monoestolide from one lesquerolic and one octadecenoic acyl group:Pseudomonas sp. lipase synthesized estolides at 62% yield, but the product mixture contained significant amounts of monoestolide with two lesquerolic acyl groups as well as diestolide. ImmobilizedR. miehei lipase was chosen to catalyze the esterification of mono-and polyestolide, derived synthetically from oleic acid, with fatty alcohols or α,ω-diols. Yields were >95% for fatty alcohol reactions and >60% for diol reactions. In addition, the estolide linkage remained intact through the course of the esterification process. Esterification of estolides improved the estolide’s properties—for example, lower viscosity and higher viscosity index—but slightly raised the melting point. Estolides and, particularly, estolide esters may be suitable as lubricants or lubricant additives.     

A method for the design of flexible distillation sequence

A simple method has been developed to optimally design a distillation sequence with a fixed degree of flexibility in feed composition and flowrate, and accounts for uncertainty in stage efficiency, K-value and beat transfer coefficient calculations. The method minimizes a weighted cost function and ensures both optimal and feasible operation in the range of flexibility/uncertainty by using an approach termed “practical feasibility”. The method was tested on a 4 column distillation sequence separating a 5 component light alkane feed mixture. Results are presented to illustrate the effect of uncertainty on sequence cost and column overdesign.     

Exploring the effect of dry premixing of sand and cement on the mechanical properties of mortar

A spout-fluid bed device was developed for dry premixing sand and cement to produce mortar. The goal of the work was to explore the efficacy of a new method for dispersing cement in sand to produce a mortar with better mechanical and physical properties. This strategy was found to work best at high sand/cement ratios, indicating that the dry premixing is more effective as the cement content is reduced and that it may be possible to produce commercially acceptable mortars with a lower cement content. Other properties of the mortar are also positively affected, including a decrease in the shrinkage and an increase in the workability.     

Non-Isothermal crystallization of isotactic polypropylene in dotriacontane. II: Effects of dilution,cooling rate,and nucleating agent addition on growth rate

Non-isothermal crystallization growth rates of nucleated and non-nucleated isotactic polypropylene (iPP) in dotriacontane were determined experimentally by thermal optical microscopy. Adipic acid was used as the nucleating agent. The non-isothermal growth rates of the nucleated and non-nucleated systems were compared with experimentally determined isothermal growth rates. The Lauritzen and Hoffman growth rate equation, originally developed for isothermal crystallization, was modified to describe the non-isothermal growth. The modified Lauritzen-Hoffman equation was used to predict isothermal growth rates from non-isothermal crystallization for the nucleated and non-nucleated polymer-diluent mixtures. This study is the first to deal with polymer-diluent-nucleating agent systems vital to membrane production.     

Damage Mechanisms and the Mechanical Properties of a Laminated 0/90 Ceramic/Matrix Composite

The tensile properties of a 0/90 laminated CAS matrix composite reinforced with Nicalon fibers have been measured. Some effects of notches have also been explored. Changes in modulus and permanent strain caused by matrix cracking have been measured and compared with available models. For this comparison, independent measurements have been made of the constituent properties and the residual stress. The ultimate tensile strength has also been measured and compared with a global load-sharing model. It is concluded that lower-bound matrix cracking models provide good predictability of the stresses at which various matrix cracking mechanisms first operate. Also, the ultimate tensile strength is found to be consistent with a global load-sharing model, based on the in situ strength properties of the fibers. Conversely, the evolution of matrix cracks at stresses above the lower bound has yet to be adequately modeled. In addition, a need is identified for improved models relating elastic properties and permanent strains to matrix crack spacing.     

LOCAL EQUILIBRIUM THEORY FOR THE DYNAMICS OF NONISOTHERMAL MIXED GAS ADSORPTION OF HIGH-CONCENTRATION COMPONENTS

A local equilibrium theory for nonisothermal gas adsorption is developed which accounts for variations in interstitial gas velocity induced by adsorption. Also presented are expressions describing the entropy admissibility criterion. A solution is developed for a Riemann's problem involving adiabatic gas-phase adsorption where there is no inert diluent and where Langmuir isotherms apply.     

Context dependence of phenotype prediction and diversity in combinatorial mutagenesis

Two different combinatorial mutagenesis experiments on the light-harvestingII (LH2) protein of Rhodobacter capsulatus indicate that heuristicrules relating sequence directly to phenotype are dependenton which sets or groups of residues are mutated simultaneously.Previously reported combinatorial mutagenesis of this chromogenicprotein (based on both phylogenetic and structural models) showedthat substituting amino acids with large molar volumes at Gly^ß31caused the mutated protein to have a spectrum characteristicof light-harvesting I (LH1). The six residues that underwentcombinatorial mutagenesis were modeled to lie on one side ofa transmembrane -helix that binds bacteriochlorophyll. In asecond experiment described here, we have not used structuralmodels or phylogeny in choosing mutagenesis sites. Instead,a set of six contiguous residues was selected for combinatorialmutagenesis. In this latter experiment, the residue substitutedat Gly^ß31 was not a determining factor in whetherLH2 or LH1 spectra were obtained; therefore, we conclude thatthe heuristic rules for phenotype prediction are context dependent.While phenotype prediction is context dependent, the abilityto identify elements of primary structure causing phenotypediversity appears not to be. This strengthens the argument forperforming combinatorial mutagenesis with an arbitrary groupingof residues if structural models are unavailable.     

Organolithium route to poly(arylsilane)s

Various poly(arylsilane)s The poly(carbosilane)s prepared in this way are of higher molecular weight than when prepared by the Wurtz-type condensation route previously reported. TG shows 40–50% overll weight loss attained at 500–600°C.