Use of a subcutaneous glucose sensor to detect decreases in glucose concentration prior to observation in blood

The development of a hypoglycemic alarm system using a subcutaneous glucose sensor implies that a decrease in blood glucose is rapidly followed by a decrease in the signal generated by the sensor. In a first set of experiments the linearity and the kinetics of the response of sensors implanted in the subcutaneous tissue of normal rats were investigated during a progressive increase in plasma glucose concentration: the sensitivities determined between 5 and 10 mM and between 10 and 15 mM were not significantly different, and a 5-10 min delay in the sensor's response was observed. In a second set of experiments, performed in diabetic rats, the kinetics of the decrease in subcutaneous glucose concentration following insulin administration was monitored during a decrease in plasma glucose level, from 15 to 3 mmol/L. During the 20 first min following insulin administration, the sensor monitored glucose concentration in subcutaneous tissue with no lag time. Subsequently, the decrease in the estimation of subcutaneous glucose concentration preceded that of plasma glucose. This phenomenon was not observed when the same sensors were investigated in vitro during a similar decrease in glucose concentration and may be due to a mechanism occurring in vivo, such as the effect of insulin on glucose transfer from the interstitial space to the cells surrounding the sensor. It reinforces the interest of the use of implantable glucose sensors as a part of a hypoglycemic alarm.     

A column centrifugation method for the reconstitution in liposomes of the mitochondrial F0F1 ATP synthase/ATPase

A method for reconstitution of membrane proteins into unilamellar liposomes is described. The model enzyme was the F0F1 ATP synthase from mitochondria when in complex or free from its inhibitor protein. The enzymes were first solubilized with either of two detergents, i.e., n-dodecyl-beta-D maltoside or lauryldimethylamine oxide. After solubilization, the enzymes were passed through a column of Sepharose-AH using an ADP/sodium cholate selective elution buffer. The enzymes recovered from the column were subsequently passed through a centrifuge column of Sephadex G-50 fine. The eluate contained liposomes in which the F0F1 complex (with and without inhibitor protein) had been reconstituted. The reconstituted enzymes were capable of hydrolyzing ATP with formation of electrochemical H+ gradients. They also catalyzed the ATP-Pi exchange reactions. Thus the F0F1 complex which is formed by 18 subunits can be rapidly reconstituted into liposomes in a fully functional state. Moreover the data show that the interactions between the enzyme and its inhibitor protein are not perturbed in the reconstitution procedure.     

Evaluating Ozone as a Remedial Treatment for Removing RDX from Unsaturated Soils

Years of wastewater discharge at the Department of Energy’s Pantex Plant have contaminated the vadose zone and underlying perched aquifer with hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Because the vadose zone is acting as a continual source of groundwater contamination, removing RDX from the unsaturated zone is paramount to prevent further contamination. We determined the efficacy of ozone to degrade and mineralize RDX. Solution experiments showed that ozone (27?mg?L?1; 150?mL?min?1) was effective in mineralizing 80% of the RDX (30?mg?RDX?L?1) provided that some Pantex soil was present to buffer the solution pH. Soil columns treated with ozone produced 50% RDX mineralization within 1 day and >80% within 7 day. Experiments designed to evaluate aerobic biodegradation following partial ozonation of a RDX solution showed that ozone-generated RDX products were much more biodegradable than untreated controls in aerobic microcosms (35 versus <0.3% cumulative mineralization). These results support the use of ozone as a remedial treatment for the contaminated vadose zone at the Pantex facility.     

混合信号SoC设计的现状与未来

从消费电子市场最容易得到的经验是集成为王。移动型战胜便携型,掌上型战胜移动型,而衬衫口袋型又超过掌上型。即使像游戏机这类桌面设备,时髦的外形和低制造成本目标也要靠更高集成度才能实现。这一趋势并不限于低成本的消费电子产品。军用、汽     

Remote sensing of species mixtures in conifer plantations using LiDAR height and intensity data

In even-aged, single species conifer plantations LiDAR height data can be modelled to provide accurate estimates of tree height and volume. However, it is apparent that growth models developed for single species stands are not directly transferable to a more general situation of mixed species plantations. This paper evaluates the ability of small footprint, dual-return, pulsed airborne LiDAR data to estimate the proportion of the productive species when mixed with a nurse crop in closed canopy plantations. A study area located in Galloway Forest District in Scotland is used as an example of Lodgepole pine and Sitka spruce mixed plantation; this area contains good examples of a wide range of pure and mixed species plantation types. Three species groups are studied: areas of pure Sitka spruce, areas of pure Lodgepole pine and areas where the two species have been planted together. Two approaches are assessed for detection of plantation mixtures: the first uses LiDAR intensity data to separate spruce and pine species and the second uses LiDAR-derived canopy density measures, coefficient of variation, skewness, percent of ground returns (which provides a measure of canopy openness) and the mean canopy height, which enables areas with height variations to be identified. From analysis of LiDAR data extracted from 54 study plots using logistic regression, the coefficient of variation and LiDAR intensity data provide the most useful predictors of the proportion of spruce in a pine/spruce mixture with coefficients of determination (R²) of 0.914 and 0.930 respectively. The method could be developed as a mapping tool, which in combination with existing inventory data should help to improve timber volume forecasting for mixed species even-aged plantations.     

Optimization of gas-sensitive polymer arrays using combinations of heterogeneous and homogeneous subarrays

Results for optimizing an array of conducting polymer gas sensors for sensing one of five analytes in the presence of up to four interferents are presented. The optimized array consists of subarrays of homogeneous (like) sensors contributing to a larger heterogeneous array of up to ten points (unlike sensors) in multidimensional sensor space. The optimization techniques presented here are linear, since the polymer sensors in their useful (low concentration) operating range exhibit linear and additive response characteristics. The optimization of these arrays produces maximum separability between analytes, demonstrating the trade-off between the addition of both information and variability induced by increasing the size of the heterogeneous array. Optimization results for sensing acetone, hexane, THF, toluene, and ethanol in the presence of interferents result in array sizes that are significantly less than the maximum available number of sensors (ten in the heterogeneous partition of the array). This result adds fuel to the argument that fewer sensors are better; the argument for more sensors, however, is also made in the context of the electronic nose systems where significant chemical diversity is required. Homogeneous subarrays of up to four elements each improve the separability of analytes in these optimized heterogeneous arrays by over 10% and also effectively flag broken or unhealthy sensors in a manner that is independent of analyte and concentration.     

The evolution of the sleep science literature over 30 years: A bibliometric analysis

During the 1974–2004 period, the sleep literature had quadrupled (2384 publications in 1974, and 9721 in 2004) while overall scientific productivity had only doubled. The set of the seven most productive countries (USA, Japan, United Kingdom, Germany, France, Canada and Italy) in sleep research, and the geographical region distribution remained stable over the three decades. On the other hand several indicators appeared in the sleep research literature during the 1990s: the increasing productivity of sleep researchers; the growing number of countries publishing on sleep; the continuous creation of sleep-focused journals; the scattering of sleep publication among increasingly more scientific journals; the turnover among the leading journals; and the emergence of new entities such as China, Turkey, and the European Union.     

Monte Carlo Simulations of High-Performance Implant Free In0.3Ga 0.7As Nano-MOSFETs for Low-Power CMOS Applications

The potential performance of implant free heterostructure In_0.3Ga_0.7As channel MOSFETs with gate lengths of 30, 20, and 15 nm is investigated using state-of-the-art Monte Carlo (MC) device simulations. The simulations are carefully calibrated against the electron mobility and sheet density measured on fabricated III-V MOSFET structures with a high-kappa dielectric. The MC simulations show that the 30 nm gate length implant free MOSFET can deliver a drive current of 2174 muA/mum at 0.7 V supply voltage. The drive current increases to 2542 muA/mum in the 20 nm gate length device, saturating at 2535 muA/mum in the 15 nm gate length one. When quantum confinement corrections are included into MC simulations, they have a negligible effect on the drive current in the 30 and 20 nm gate length transistors but lower the 15 nm gate length device drive current at 0.7 V supply voltage by 10%. When compared to equivalent Si based MOSFETs, the implant free heterostructure MOSFETs can deliver a very high performance at low supply voltage, making them suitable for low-power high-performance CMOS applications