Method for Measuring Short-Crack R-Curves without Calibration Parameters: Case Studies on Alumina and Alumina/Aluminum Composites

A method to measure short-crack R -curves is introduced which does not require an independent determination of calibration factors and which utilizes an equilibrium crack shape condition to compute the shape factor of a surface crack, R -curves of an alumina with two different grain sizes and of an aluminum/alumina composite were measured in the crack length regime of below 100 μm up to almost 1000 μm. Calculated and experimentally obtained crack depth profiles were in good agreement with deviations being between −22% and +26% for the crack ellipticity and confirmed the reliability of the method.     

Microwave cavity perturbation technique: Part I: Principles

This report reviews the analysis used to extract the complex conductivity of a compound from a microwave cavity perturbation measurement. We intend to present a generalized treatment valid for any spheroidally shaped sample of arbitrary conductivity which is placed at either the electric or magnetic field antinode of the cavity. To begin with, we establish the relationship between the measured parameters and the conductivity for a spherical sample. Next, we extend these results to the case of spheroids; and for the first time, we cover all different configurations that one can possibly use to study an arbitrary conducting sample inside a cavity: in particular, all possible orientations of the sample with respect to the applied field are solved.     

Surface leakage currents in SiN/sub x/ passivated AlGaN/GaN HFETs

A novel guarded surface leakage test structure is used to isolate the surface and bulk leakage contributions to gate current in AlGaN/GaN HFETs. Passivation with various recipes of SiN/sub x/ always resulted in the commonly observed increase in gate leakage, which was found to be dominated by bulk leakage through the AlGaN. However, high temperature deposited SiN/sub x/ recipes gave a 1-2 orders reduction in surface leakage, whereas low temperature deposition gave an increase. Gate lag measurements were found to correlate closely with the surface leakage component, giving direct evidence that the key device problem of current slump is associated with current flow at the AlGaN surface.     

Olefins from conventional and heavy feedstocks: Energy use in steam cracking and alternative processes

Steam cracking for the production of light olefins, such as ethylene and propylene, is the single most energy-consuming process in the chemical industry. This paper reviews conventional steam cracking and innovative olefin technologies in terms of energy efficiency. It is found that the pyrolysis section of a naphtha steam cracker alone consumes approximately 65% of the total process energy and approximately 75% of the total exergy loss. A family portrait of olefin technologies by feedstocks is drawn to search for alternatives. An overview of state-of-the-art naphtha cracking technologies shows that approximately 20% savings on the current average process energy use are possible. Advanced naphtha cracking technologies in the pyrolysis section, such as advanced coil and furnace materials, could together lead to up to approximately 20% savings on the process energy use by state-of-the-art technologies. Improvements in the compression and separation sections could together lead to up to approximately 15% savings. Alternative processes, i.e. catalytic olefin technologies, can save up to approximately 20%.     

Towards hybrid Triple Helix indicators: A study of university-related patents and a survey of academic inventors

This paper presents work directed at capturing the entrepreneurial and collaborative activity of university researchers. The Triple Helix points to the emergence of the entrepreneurial university as well as to an increasing overlay of activities in universities, industry and government. This study explores ways in which patent-based metrics could be utilized in a Triple Helix context, and how hybrid indicators could be developed by combining patent with survey data. More specifically, it aims to develop indicators that connect technological inventiveness of university researchers to both funding organizations and users, as well as to entrepreneurial activities by academics. The paper develops a simplified model of the innovation process to benchmark the relevance of the indicators to the Triple Helix. An analysis of Finnish academic patents illustrates that patent data can already provide useful indicators but, on its own, cannot provide information about how academic patents are interconnected with government or industry through funding or utilization links. An exclusive analysis of patents can point to patent concentrations on certain universities, to inventors and assignees, or to potential gaps in translating applied science into industrial technology. However, the patent data had to be combined with an inventor survey in order to relate academic patents more to their Triple Helix environment. The survey indicated that most patented academic inventions are connected to (often publicly funded) scientific research by the inventors and tend to be utilized in large firms rather than in start-up companies founded by academic entrepreneurs.     

Ultraviolet chambers based on integrating spheres for use in artificial weathering

Laboratory ultraviolet (UV) chambers are widely used to obtain weathering data for a wide range of commercial polymer products including coatings, textiles, elastomers, plastics, and polymeric composites. Although numerous improvements have been made in the design of UV chambers over the last 80 years, the reproducibility of the exposure results from these chambers has remained elusive. This lack of reproducibility is attributed to systematic errors in their design, operation, and control which prevent direct comparisons of the performance of materials exposed in the same environment, comparisons of the performance of the same material exposed in different laboratories, and the comparison of field and laboratory results. This paper describes an innovative UV chamber design based on integrating sphere technology that greatly reduces the magnitude of these errors, as well as provides additional experimental capabilities. Presented at the 79th Annual Meeting of the Federation of Societies for Coatings Technology, on November 4–7, 2001, in Atlanta, GA. Building Materials Division. Gaithersburg, MD. Freeport, TX.     

Natural isotope fractionation in the discrimination of sugar origins

More than 500 carbohydrate samples have been characterised by hydrogen, carbon and oxygen isotopic parameters measured on ethanol and water resulting from controlled fermentation. Different chemical states of the carbohydrate pool have been considered: polysaccharides from cereals, tubers and leguminosae (maize, sorghum, rice, wheat, barley, potato, bean), glucose, fructose and sucrose from fruits (pineapple, citrus, apple, soft fruits), sucrose from sugar plants (beet, cane). The overall carbon-13 content of ethanol and the deuterium and oxygen-18 contents of water before fermentation were determined by mass spectrometry of isotope ratios whereas the investigation of site-specific natural isotope fractionation by deuterium NMR has provided access to the deuterium contents in the methyl (I) and methylene (II) sites of ethanol. The results have been analysed in the multidimensional space of these isotopic variables. Hierarchical clustering, principal component and discriminant analyses have been performed. Among fruits, for example, the pineapple group exhibits a 100% discrimination with respect to the apple and citrus groups which are themselves well distinguished. A still higher discrimination is reached between the three groups, citrus, cane and beet, and the addition of 10% exogenous cane or beet sucrose to citrus juice is unambiguously detected.     

An adaptive analog continuous-time CMOS biquadratic filter

An adaptive analog continuous-time biquadratic filter is realized in a 2-μm digital CMOS process for operation at 300 kHz. The biquad implements the notch, bandpass and low-pass transfer functions. The only parameter adapted is the resonant frequency of the biquad, which is identical to the notch frequency and the bandpass center frequency. The update method is based on a least-means-square algorithm which adapts the notch frequency to minimize the power at the notch filter output. The actual update is modified to reduce the circuit complexity to one biquad and one correlator. When the filter is tracking a sinusoid, this update generates a ripple-free gradient that decreases tracking error. Applications include phase-frequency detectors, FM demodulators (linear and frequency shift keying), clock extractors, and frequency acquisition aids for phase-locked loops and Costas loops. Measured results from experimental prototypes are presented. Nonidealities of an all-analog implementation are discussed, along with suggestions to improve performance     

Computer-aided analysis of free-running microwave oscillators

The authors present a newly developed free-running steady-state oscillator analysis algorithm suited to large-signal oscillator analysis. Kurokawa's oscillation condition is coupled with the modified nodal admittance form of the circuit equations to avoid degenerate solutions. The algorithm was implemented by using both harmonic balance and frequency-domain spectral balance techniques. It was used in the simulation of monolithically integrated varactor-tuned MESFET oscillator. Good agreement between simulated power and oscillation frequency results was obtained