Multimodal Bioactivation of Hydrophilic Electrospun Nanofibers Enables Simultaneous Tuning of Cell Adhesivity and Immunomodulatory Effects

Biomaterials research usually focuses on functional and structural mimicry of the extracellular matrix or tissue hierarchy and morphology. Most recently, material‐induced modulatory effects on the immune system to arouse a healing response is another upcoming strategy. Approaches, however, that integrate both aspects to induce healing and facilitate specific cell adhesion are so far little explored. This study exploits manifold but chemical crosslinker free functionalization of hydrophilic and nonadhesive electrospun fiber surfaces with peptides for controlled cell adhesion, and with neutra­lizing antibodies targeting the master cytokine tumor necrosis factor (TNF) to dampen proinflammatory reactions by the fiber adherent cells. It is demonstrated that cell attachment and immunomodulatory properties of a textile can be tailored at the same time to generate meshes that combine immunosuppressive activity with specific cell adhesion properties.     

SR ARQ packet delay statistics on markov channels in the presence of variable arrival rate

In this letter we investigate the packet delay statistics of a fully reliable selective repeat ARQ scheme by considering a discrete time Markov channel with non-instantaneous feedback and assigned round-trip delay m. Our focus is on studying the impact of the arrival process on the delay experienced by a packet. An exact model is introduced to represent the system constituted by the transmitter buffer, the m round-trip slots, and the channel state. By means of this model, we evaluate and discuss the delay statistics and we analyze the impact of the system parameters, in particular the packet arrival rate, on the delay statistics     

Oscillation of the scattering time in a 2D electron system with oval antidots

Electron scattering by a single barrier is predicted to reveal singularities as the magnetic field is changed, because the number of electron collisions with the barrier dramatically increases as chaotic orbits around the barrier are changed into periodic orbits. To test this experimentally we have measured the magnetoresistance of AlGaAs/GaAs heterostructures with a two-dimensional electron gas and a lateral lattice containing a macroscopic number of oval-shaped antidots fabricated using electron lithography. Reproducible fluctuations in the magnetoresistance are observed at low field, which are due to the oscillations of the number of electron collisions with the antidots. The number of collisions N before the electron escapes from the antidot has been calculated as a function of B in an electric field. The position of the maxima in N(B) obtained from calculations and experiment are in reasonable agreement.     

A fully integrated 0.18-/spl mu/m CMOS direct conversion receiver front-end with on-chip LO for UMTS

This paper presents a 0.18-/spl mu/m CMOS direct-conversion IC realized for the Universal Mobile Telecommunication System (UMTS). The chip comprises a variable gain low-noise amplifier, quadrature mixers, variable gain amplifiers, and local oscillator generation circuits. The solution is based on very high dynamic range front-end blocks, a low-power superharmonic injection-locking technique for quadrature generation and continuous-time dc offset removal. Measured performances are an overall gain variable between 21 and 47 dB, 5.6 dB noise figure, -2 dBm out-of-band IIP3, -10 dBm in-band IIP3, 44.8-dBm minimum IIP2, and -155-dBc/Hz phase noise at 135 MHz from carrier frequency, while drawing 21 mA from a 1.8-V supply.     

Accelerated Ionic Motion in Amorphous Memristor Oxides for Nonvolatile Memories and Neuromorphic Computing

Memristive devices based on mixed ionic–electronic resistive switches have an enormous potential to replace today's transistor‐based memories and Von Neumann computing architectures thanks to their ability for nonvolatile information storage and neuromorphic computing. It still remains unclear however how ionic carriers are propagated in amorphous oxide films at high local electric fields. By using memristive model devices based on LaFeO₃ with either amorphous or epitaxial nanostructures, we engineer the structural local bonding units and increase the oxygen‐ionic diffusion coefficient by one order of magnitude for the amorphous oxide, affecting the resistive switching operation. We show that only devices based on amorphous LaFeO₃ films reveal memristive behavior due to their increased oxygen vacancy concentration. We achieved stable resistive switching with switching times down to microseconds and confirm that it is predominantly the oxygen‐ionic diffusion character and not electronic defect state changes that modulate the resistive switching device response. Ultimately, these results show that the local arrangement of structural bonding units in amorphous perovskite films at room temperature can be used to largely tune the oxygen vacancy (defect) kinetics for resistive switches (memristors) that are both theoretically challenging to predict and promising for future memory and neuromorphic computing applications.     

Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

Evidence for the Band‐Edge Exciton of CuInS2 Nanocrystals Enables Record Efficient Large‐Area Luminescent Solar Concentrators

Ternary I‐III‐VI₂ nanocrystals (NCs), such as CuInS₂, are receiving attention as heavy‐metals‐free materials for solar cells, luminescent solar concentrators (LSCs), LEDs, and bio‐imaging. The origin of the optical properties of CuInS₂ NCs are however not fully understood. A recent theoretical model suggests that their characteristic Stokes‐shifted and long‐lived luminescence arises from the structure of the valence band (VB) and predicts distinctive optical behaviours in defect‐free NCs: the quadratic dependence of the radiative decay rate and the Stokes shift on the NC radius. If confirmed, this would have crucial implications for LSCs as the solar spectral coverage ensured by low‐bandgap NCs would be accompanied by increased re‐absorption losses. Here, by studying stoichiometric CuInS₂ NCs, it is revealed for the first time the spectroscopic signatures predicted for the free band‐edge exciton, thus supporting the VB‐structure model. At very low temperatures, the NCs also show dark‐state emission likely originating from enhanced electron‐hole spin interaction. The impact of the observed optical behaviours on LSCs is evaluated by Monte Carlo ray‐tracing simulations. Based on the emerging device design guidelines, optical‐grade large‐area (30×30 cm²) LSCs with optical power efficiency (OPE) as high as 6.8% are fabricated, corresponding to the highest value reported to date for large‐area devices.     

Biologically Inspired and Magnetically Recoverable Copper Porphyrinic Catalysts: A Greener Approach for Oxidation of Hydrocarbons with Molecular Oxygen

An efficient synthetic method for magnetically recoverable hybrid copper porphyrinic nanomaterials is reported. These functionalized magnetic materials prove to be efficient bioinspired oxidation catalysts of olefins and thiols, using molecular oxygen as oxidant, in total absence of reductants and solvents, with the highest TON (turnover number) yet achieved for this reaction (≈200 000). A comparative study between homogeneous and heterogeneous oxidation of cyclohexene is discussed, revealing the heterogeneous system to be the most promising concerning stability and reusability of the catalysts. The full characterization of the magnetic hybrid porphyrinic nanomaterials, by transmission electron microscopy, flame atomic absorption spectrometry, thermogravimetry, N₂ sorption, and infrared spectroscopy, is also described.     

Optical processing technique for spot-size measurements in single-mode fibres

A new, simple and very promising technique for spot-size measurements in single-mode fibres is proposed, based on a spatial filter which modulates the optical beam at the output of the fibre. Its inherent simplicity, accuracy and high efficiency make it attractive for laboratory and factory measurements.     

Control of the J-Aggregation Phenomenon by variation of the N-alkyl-substituents

Cyanine dyes ( 1a–d ) with the 5,5′,6,6′-tetrachloro-1,1′-dialkyl-3,3′-di-(3-carboxypropyl)-benzimidocarbocyanine chromophore differing only in the chain length of their alkyl groups in 1,1′-position have been synthesized, spectroscopically characterized, and compared with 5,5′6,6′-tetrachloro-1,1′-diethyl-3,3′-di-(4-sulfobutyl)-benzimidocarbocyanine( TDBC ). In aqueous solution the dyes form J-aggregates which, depending on the alkyl group chain length, exhibit J-bands differing in spectral positions, bandwidth, and in the number of peaks.