Rheological characteristics of oligomeric semiproducts gained via chemical degradation of polyurethane foam using crude glycerin in the presence of different catalysts

Polyurethane (PU) recycling is a topic of growing interest due to the increasing amount of polyurethane waste. The main purpose of polyurethane chemical recycling is to recover the starting polyol. In this study, a method of polyurethane thermochemical recycling, glycerolysis by means of crude glycerin, is proposed. This work presents a comparative study of commercial catalysts used in order to accelerate the decomposition process, namely triethylamine (TEA), potassium acetate (KAc), 1,4‐diazabicyclo[2.2.2]octane (DABCO), sodium hydroxide (NaOH), dibutyltin dilaurate (DbDl), and stannous octoate (StOc).The effect of used catalyst on the chemical structure and rheological properties was studied. The type of catalyst does not have significant influence on the chemical structure, but causes different course of reaction: split‐ and single‐phase in applied conditions. Glycerolysates were measured by Brookfield Rheometer. It was found that repolyols can be described by the Herschel–Bulkely mathematical model in the best accuracy. The investigation showed that the rheological behavior of glycerolysates depended on the catalyst used in glycerolysis process. POLYM. ENG. SCI., 57:891–900, 2017. © 2016 Society of Plastics Engineers     

Development of Multi Micro Manipulation System Using IPMC Micro Grippers

This paper presents a new design of multi micro manipulation system using ionic polymer metal composite (IPMC) micro grippers for robotic micro assembly where IPMC is used as a light weight actuator for developing the micro grippers. It has the potential of large displacement, low mass force generation and misalignment compensation ability during micro manipulation. These capabilities are utilized for handling of miniature parts like pegs. The analysis of IPMC micro gripper and manipulator are carried out for developing a multi micro manipulation system that can handle pegs in micro assembly operation for shifting one to another hole position in a large work space (100 mm × 100 mm). By developing a prototype, it is demonstrated that IPMC based micro grippers are capable of handling the peg-in-hole assembly tasks in a multi micro manipulation system.     

Predictive Thermal Inactivation Model for Effects and Interactions of Temperature, NaCl, Sodium Pyrophosphate, and Sodium Lactate on Listeria monocytogenes in Ground Beef

The effects and interactions of heating temperature (60 °C to 73.9 °C), salt (0.0 % to 4.5 %?w/v), sodium pyrophosphate (0.0 % to 0.5 %?w/v), and sodium lactate (0.0 % to 4.5 %?w/v) on the heat resistance of a five-strain mixture of Listeria monocytogenes in 75 % lean ground beef were examined. Meat samples in sterile filtered stomacher bags were heated in a temperature controlled waterbath to determine thermal death times. The recovery medium was tryptic soy agar supplemented with 0.6 % yeast extract and 1 % sodium pyruvate. Weibull survival functions were employed to model the primary survival curves. Then, survival curve-specific estimated parameter values obtained from the Weibull model were used for determining a secondary model. The results indicate that temperature and salt have a large impact on the inactivation kinetics of L. monocytogenes, while sodium lactate (NaL) has an impact in the presence of salt. The model presented in this paper for predicting inactivation of L. monocytogenes can be used as an aid in designing lethality treatments meant to control the presence of this pathogen in ready-to-eat products.     

Design and Characterization of a W-Band Folded-Waveguide Slow-Wave Structure

A single-section slow-wave structure for a W-band folded-waveguide traveling-wave tube with operating bandwidth of around 4% was designed for delivering the output power of 50 W at the operating voltage of 13.5 kV and operating beam current of 80 mA. The design was carried out using analytical formulations and 3D electromagnetic simulations. The beam-wave interaction analysis was carried out using large signal Lagrangian analysis and particle-in-cell simulation. The folded-waveguide slow-wave structure along with input-output couplers and RF windows were fabricated. Cold test measurements were carried out for dispersion characteristics of the slow-wave structure and voltage standing-wave ratio and insertion loss characteristics of the RF window. The measured cold circuit parameters show close agreement with the analysis.     

Semiconductor quantum dots as nanoelectronic circuit components

In this paper, a systematic investigation of frequency response of CdS and CdS:Cu quantum dot devices, following microwave-assisted synthesis, is presented. Phase of the output relative to the input as a function of frequency is also recorded to have some insight into the observed low-pass filter characteristics of the as-fabricated devices. The as-fabricated quantum dot devices are found to have all the characteristics of a classical low-pass filter with optimization of gain, phase shift and cut-off frequency in the band-gap range of ‘2.5–2.6’ eV. The as-fabricated devices are tested for demodulation and satisfactory operation is obtained. This suggests for employing such nanoscale devices in the field of communications.     

Lead‐Free Polycrystalline Ferroelectric Nanowires with Enhanced Curie Temperature

Ferroelectrics are important technological materials with wide‐ranging applications in electronics, communication, health, and energy. While lead‐based ferroelectrics have remained the predominant mainstay of industry for decades, environmentally friendly lead‐free alternatives are limited due to relatively low Curie temperatures (T _C) and/or high cost in many cases. Efforts have been made to enhance T _C through strain engineering, often involving energy‐intensive and expensive fabrication of thin epitaxial films on lattice‐mismatched substrates. Here, a relatively simple and scalable sol–gel synthesis route to fabricate polycrystalline (Ba_0.85Ca_0.15)(Zr_0.1Ti_0.9)O₃ nanowires within porous templates is presented, with an observed enhancement of T _C up to ≈300 °C as compared to ≈90 °C in the bulk. By combining experiments and theoretical calculations, this effect is attributed to the volume reduction in the template‐grown nanowires that modifies the balance between different structural instabilities. The results offer a cost‐effective solution‐based approach for strain‐tuning in a promising lead‐free ferroelectric system, thus widening their current applicability.     

Linear circuits: a measurement‐based approach

This paper proposes a new measurement‐based approach that can solve synthesis problems in unknown linear circuits. The method makes use of a small number of measurements to determine the functional dependency of any circuit signal or variable on any set of design variables. Once the functional dependency is obtained, the design requirements can be applied to find the design parameter values. The results are described for linear direct current and alternating current circuits. Copyright © 2013 John Wiley & Sons, Ltd.     

Poly(ethylene oxide)‐g‐gellan polysaccharide nanocarriers for controlled gastrointestinal delivery of simvastatin

Herein, a novel gellan polysaccharide‐based amphiphilic copolymer was synthesized for the development of simvastatin‐loaded micellar nanoparticles. The nanoparticles were explored for their controlled drug release and improved pharmacodynamic potentials. The copolymer was characterized by Fourier transform infrared spectroscopy (FTIR) and elemental analysis. The onset of copolymer micellization was detected by fluorescence spectroscopy. Simvastatin was loaded into micellar particles by solvent evaporation method and the particles were then characterized by microscopic and light scattering techniques. The physical state of drug was studied by X‐ray diffraction analysis. Pharmacodynamic assessment of the micellar preparations was done on rabbit models. The copolymer formed micellar nanoparticles in water. Critical micellar concentration was 9.12mg/l. The micellar particles (426.8–912.6nm) entrapped a maximum of 18.86% drug. Higher negative zeta potential indicated physical stability of micellar systems. A simple diffusion mechanism was operative in the event of comparatively faster drug release in pH6.8 phosphate buffer solution. No significant drug‐copolymer interaction was traced by FTIR spectroscopy. The amorphization of drug into micellar particles reduced LDL‐cholesterol level by ～45% in hyperlipidemic rabbits and this was about 2.5 times higher than pure drug dispersion. Copolymer micellar nanoparticles of simvastatin could control cholesterol level in hyperlipidemic rabbits and thus had potential in drug delivery applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42399.