Critical Factors in the Templated Grain Growth of Textured Reaction-Bonded Alumina

The Templated Grain Growth (TGG) of Al₂O₃ occurs in three stages: densification, radial growth of individual template grains until template impingement, and template grain thickening. Significant template growth occurs only after densification to ∼90% density. Template loading determines the inter-template spacing and, subsequently, the degree of growth. The spacing distance can be predicted from the initial template concentration and template dimensions. Thermodynamic conditions favorable for template growth occur when the size ratio between the template thickness and matrix grains is ≥1.5. The initial template concentration should be less than a critical template concentration, V _T,C, to achieve textured ceramics with a narrow orientation distribution. For this system, which uses 20 ± 5 μm × 2 μm template particles and uniaxial pressing as a forming technique, V _T,C is between 5 and 10 vol%.     

Sintering,microstructure and mechanical properties of Al2O3–Y2O3–ZrO2 (AYZ) eutectic composition ceramic microcomposites

We report on how the mechanical properties of sintered ceramics (i.e., a random mixture of equiaxed grains) with the Al₂O₃–Y₂O₃–ZrO₂ eutectic composition compare with those of rapidly or directionally solidified Al₂O₃–Y₂O₃–ZrO₂ eutectic melts. Ceramic microcomposites with the Al₂O₃–Y₂O₃–ZrO₂ eutectic composition were fabricated by sintering in air at 1400–1500 °C, or hot pressing at 1300–1400 °C. Fully dense, three phase composites of Al₂O₃, Y₂O₃-stabilized ZrO₂ and YAG with grain sizes ranging from 0.4 to 0.8 μm were obtained. The grain size of the three phases was controlled by the size of the initial powders. Annealing at 1500 °C for 96 h resulted in grain sizes of 0.5–1.8 μm. The finest scale microcomposite had a maximum hardness of 19 GPa and a four-point bend strength of 282 MPa. The fracture toughness, as determined by Vickers indentation and indented four-point bending methods, ranged from 2.3 to 4.7 MPa m^1/2. Although strengths and fracture toughnesses are lower than some directionally or rapidly solidified eutectic composites, the intergranular fracture patterns in the sintered ceramic suggest that ceramic microcomposites have the potential to be tailored to yield stronger, tougher composites that may be comparable with melt solidified eutectic composites.