On the boundary integral formulation of thermo-viscoelasticity theory

A formulation of the boundary integral equation method for generalized thermo-viscoelasticity is given. Fundamental solutions of the corresponding differential equations are obtained. An outline of the implementation of the boundary element method is discussed for the solution of the above boundary equations. Special emphasis is given to the representation of the primary fields, namely, temperature and displacement.     

Practical Considerations for Recursive DFT Implementation in Numerical Relays

In this paper, practical considerations for recursive Discrete Fourier Transform (DFT) implementation in numerical relays are presented. The DFT filter instabilities which would produce accumulated errors are emphasized. The aspects ruling error accumulation of the estimated magnitude and phase are highlighted. Novel solutions directed for the elimination of error accumulation are proposed and intensively tested. Digital signal processing (DSP) board based test set-up is utilized for the experimental verification. The paper results are valuable for the protection engineers particularly those concerned with the development and implementation of numerical relays     

The relaxation effects of the volume properties of viscoelastic material in generalized thermoelasticity

A new model of the equations of generalized thermoviscoelasticity for isotropic media taking into consideration the rheological properties of the volume is given. The formulation is applied to both generalizations, Lord-Shulman theory and the Green-Lindsay theory, as well as to the coupled theory.The state space approach is adopted for the solution of one-dimensional problems in the absence or presence of heat sources. The Laplace-transform technique is used. A numerical method is employed for the inversion of the Laplace transforms. Numerical results for the stress distribution are given and illustrated graphically for each problem. Comparisons are made with the results predicted by the three theories, or ignoring the viscous effects of the volume. It is found that the consideration of these effects is to decrease the thermal stresses.     

VLSI parallel architecture for Kalman filterAn algorithm specific approach

An algorithm specific architecture for Kalman filter is presented. It is based on systolic arrays. Parallelism has been exploited on both algorithm and architecture levels. Faddeev's algorithm has been employed. The involved computation tasks, triangularization and nullification are performed in parallel which leads to a speedup of about 40%. Throughput has been increased by using bi-trapezoidal arrays. Techniques have been employed for data storage and skewing which enables fast data transfer rates. A VLSI implementation of a prototype of matrix of size 4×4 has been discussed.     

Field Evaluation of Surge and Continuous Flows in Furrow Irrigation Systems

The objective of this paper is to study the performance of surgeand continuous furrow irrigation based on field experiments. Theexperiments took place on two farms located in the State of NewMexico, U.S.A., cultivated with Beans and Alfalfa and havingdifferent types of soil. Each farm was divided into two parts,where the first was designed to practice surge and the secondcontinuous irrigation. The analysis of the results showed thatsurge flow proides the desired crop water requirement at almost40% saving in water and time as well as improving the distribution uniformity and application efficiency of irrigation to about 90%.     

A Low Power Architecture for HASM Motion Tracking

This paper proposes low power VLSI architecture for motion tracking that can be used in online video applications such as in MPEG and VRML. The proposed architecture uses a hierarchical adaptive structured mesh (HASM) concept that generates a content-based video representation. The developed architecture shows the significant reducing of power consumption that is inherited in the HASM concept. The proposed architecture consists of two units: a motion estimation and motion compensation units.The motion estimation (ME) architecture generates a progressive mesh code that represents a mesh topology and its motion vectors. ME reduces the power consumption since it (1) implements a successive splitting strategy to generate the mesh topology. The successive split allows the pipelined implementation of the processing elements. (2) It approximates the mesh nodes motion vector by using the three step search algorithm. (3) and it uses parallel units that reduce the power consumption at a fixed throughput.The motion compensation (MC) architecture processes a reference frame, mesh nodes and motion vectors to predict a video frame using affine transformation to warp the texture with different mesh patches. The MC reduces the power consumption since it uses (1) a multiplication-free algorithm for affine transformation. (2) It uses parallel threads in which each thread implements a pipelined chain of scalable affine units to compute the affine transformation of each patch.The architecture has been prototyped using top-down low-power design methodology. The performance of the architecture has been analyzed in terms of video construction quality, power and delay.     

GISAXS study of temperature evolution in nanostructured CeVO4 films

Cerium vanadate films on glass substrate were obtained by sol–gel process. The morphology of these nanostructured and porous films was studied by grazing-incidence small-angle X-ray scattering (GISAXS) at synchrotron ELETTRA, Trieste, Italy. The aim of the GISAXS study was to investigate the changes in grain sizes due to the temperature evolution with three different time intervals (5, 15 and 30 min) of annealing at 673 K. We found that the effects of the different times of annealing are different for surface and bulk properties of this V/Ce oxide.     

Epoxidized polyurethaneamide and polyesteramide as petroleum pipeline coatings

Linseed oil fatty acids were epoxidized by peracetic acid, then reacted with diethanolamine to give epoxidized hydroxy ethyl linseed oil fatty acid amide ( I ). This amide was rejected with toluene diisocyanate to produce epoxidized polyurethane-amide ( II ). Component I was also reacted with phthalic anhydride to give epoxidized polyesteramide ( III ). Resins II and III were evaluated as coating materials. The results obtained were compared with commercial epoxy resin, and show that resins II and III may be suitable to use as petroleum pipeline coatings.     

Neural network based design of fault-tolerant controllers for automated sequential manufacturing systems

This paper presents a novel application of recurrent neural network (RRN) to fault-tolerant control (FTC) of automated sequential manufacturing systems (ASMS) subject to sensor faults. Two RRNs are employed: the first one acts as an I/O relations recognizer and is able to detect faulty sensors and the latter is used as an inverse model of the AMSM to compute the desired control action in a faulty case according to nominal specifications. The learning process of these networks is carried out based on training data generated from the healthy manufacturing system controlled by a programmable logic controller (PLC). Design of the proposed fault-tolerant control system (FTCS) scheme is based on utilizing the two RNNs, a reconfigurable controller and a fault decision subsystem. The design procedure of the proposed FTCS is introduced. The proposed FTCS has been implemented and tested experimentally for a benchmark industrial ASMS subject to single or multiple faulty sensors. Experimental results show the effectiveness of the procedure for a real simple plant. In addition, the results prove these features of the proposed FTCS: (a) effectively improving the faulty control system behaviors, (b) accomplishing its proper functionality in handling single and multiple sensor faults, (c) identifying the sensor faults, and (d) being advantageous in reducing the complexity of the hardware redundancy.     

Compatibilization of low‐density polyethylene/plasticized starch blends by reactive compounds and electron beam irradiation

Blends based on various compositions of low‐density polyethylene (LDPE) and plasticized starch (PLST) were prepared by melt extrusion and molding in the form of sheets under hot press. The rheology properties during mixing were studied in terms of torque and temperature against mixing time. The structural properties of LDPE/PLST blends before and after electron beam irradiation was characterized by IR spectroscopy, tensile mechanical testing, and scanning electron microscopy (SEM). The torque‐time curves during the mixing process showed that the values of torque in the first region of mixing for pure LDPE or LDPE/PLST blends are higher in the presence of the compatibilizer PEMA than that in the presence of EVA. In addition, the stability of mixing was attained after a short time in the presence of PEMA. The IR spectroscopy suggests that the compatibilization by EVA and PEMA compounds proceeds through the formation of hydrogen bonding during mixing and this compatibility was improved after electron beam irradiation. The stress–strain curves of pure LDPE and its blends with PLST showed the behavior of tough polymers with yielding properties. The SEM micrographs of the fracture surfaces give supports to the effect of EVA and PEMA as compatibilizers and the effect of electron beam irradiation. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers