Artificial Agent Action in Markets

We summarise our experiences of a number of demonstrators and simulation experiments designed to test the feasibility of using artificial decision making agents in real-time domains, and comment on the significance of our results to autonomous artificial agent action patterns in markets. Our main hypothesis is that the use of norms can extend the capability of artificial decision makers beyond what is obtained from implementing individual utility maximizers in keeping with rational choice theory.     

Dynamic diamond anvil cell (dDAC): a novel device for studying the dynamic-pressure properties of materials

We have developed a unique device, a dynamic diamond anvil cell (dDAC), which repetitively applies a time-dependent load/pressure profile to a sample. This capability allows studies of the kinetics of phase transitions and metastable phases at compression (strain) rates of up to 500 GPa/s (approximately 0.16 s(-1) for a metal). Our approach adapts electromechanical piezoelectric actuators to a conventional diamond anvil cell design, which enables precise specification and control of a time-dependent applied load/pressure. Existing DAC instrumentation and experimental techniques are easily adapted to the dDAC to measure the properties of a sample under the varying load/pressure conditions. This capability addresses the sparsely studied regime of dynamic phenomena between static research (diamond anvil cells and large volume presses) and dynamic shock-driven experiments (gas guns, explosive, and laser shock). We present an overview of a variety of experimental measurements that can be made with this device.     

Bicycle messengers: energy expenditure and exposure to air pollution

The purpose of the study was to determine the level of energy expenditure and exposure to air pollution for bicycle messengers. Relationships between heart rate (HR) and oxygen uptake, and between HR and pulmonary ventilation (VE) for each participant were established in laboratory tests. Air pollution and HR were measured during one working day. The total oxygen uptake was then described as the total energy expenditure in Joule (J) and in multiples of the energy expenditure at rest (MET). The mean energy expenditure during a working day (8 h) was 12 MJ, (4.8 MET). The level of air pollution exposure when cycling seemed to be comparable with the levels of exposure when sitting inside a vehicle. The VE during cycling was four times higher than resting value. Increased VE led to increased exposure to air pollution.     

Competitive exploration of rectilinear polygons

Exploring a polygon with robots when the robots do not have knowledge of the surroundings can be viewed as an online problem. Typical for online problems is that decisions must be made based on past events without complete information about the future. In our case the robots do not have complete information about the environment. Competitive analysis can be used to measure the performance of methods solving online problems. The competitive ratio of such a method is the ratio between the method's performance and the performance of the best method having full knowledge of the future. We prove constant competitive strategies and lower bounds for exploring a simple rectilinear polygon in the _L1$L_1$ metric.     

On the internal frost resistance of self-compacting concrete, with and without polypropylene fibres

In this article experimental and numerical studies of internal frost resistance of self-compacting and normal concrete, with and without fibres, are outlined. For this purpose self-compacting concrete with low water-cement ratio was studied, with varying amounts of filler, crystalline or sedimentary, different pouring pressures and different mixing procedure with two ages at the start of testing. The concrete was frozen twice a day at ±20^∘C all around the specimen up to 300 cycles. Measurement of length, weight and internal fundamental frequency were performed at the start of testing, at 100 cycles and at 300 frost cycles. Tests were also carried out on submerged cast self-compacting concrete and on self-compacting concrete with fibres. In reference tests normal concrete was studied in parallel. In general self-compacting concrete behaved well or better than normal concrete to internal frost except for the submerged cast concrete, where large segregation occurred and low internal frost resistance followed. The main reasons for low internal frost resistance in submerged applications were probably differences in water-cement ratio in the casting due to cement, water or/and aggregate segregation. Polypropylene fibres in concrete seemed to prohibit the movement of water in the air void system so that a sudden internal collapse occurred before 300 frost cycles.     

Modeling and gradient pattern analysis of irregular SFM structures of porous silicon

Technological applications in opto-electronic devices have increased the interest in characterizing porous silicon structure patterns. Due to its physical properties, solutions from KPZ 2D are adopted to simulate the structure of porous material interface whose spatial characteristics are equivalent to those found in porous silicon samples. The analysis of the simulated and real Scanning Force Microscopy (SFM) surfaces was done using the Gradient Pattern Analysis (GPA). We found that the KPZ 2D model presented asymmetry levels compatible with the irregular surfaces observed by means of SFM images of π-Si.     

Key principles for user-centred systems design

The concept of user-centred systems design (UCSD) has no agreed upon definition. Consequently, there is a great variety in the ways it is applied, which may lead to poor quality and poor usability in the resulting systems, as well as misconceptions about the effectiveness of UCSD. The purpose of this paper is to propose a definition of UCSD. We have identified 12 key principles for the adoption of a user-centred development process, principles that are based on existing theory, as well as research in and experiences from a large number of software development projects. The initial set of principles were applied and evaluated in a case study and modified accordingly. These principles can be used to communicate the nature of UCSD, evaluate a development process or develop systems development processes that support a user-centred approach. We also suggest activity lists and some tools for applying UCSD.     

On Forward–Backward MODE for Array Signal Processing

We apply the MODE (method of direction estimation) principle to the forward–backward (FB) covariance of the output vector of a sensor array to obtain what we call the FB-MODE procedure. The derivation of FB-MODE is an interesting exercise in matrix analysis, the outcome of which was somewhat unexpected: FB-MODE simply consists of applying the standard MODE approach to the eigenelements of the FB sample covariance matrix. By using an asymptotic expansion technique we also establish the surprising result that FB-MODE is outperformed, from a statistical standpoint, by the standard MODE applied to the forward-only sample covariance (F-MODE). We believe this to be an important result that shows that the FB approach, which proved quite useful for improving the performance of many suboptimal array processing methods, shouldnotbe used with a statistically optimal method such as F-MODE.     

Static indentation and unloading response of sandwich beams

This paper deals with analysis of foam core sandwich beams subject to static indentation and subsequent unloading (removal of load). Sandwich beams are assumed continuously supported by a rigid platen to eliminate global bending. An analytical model is presented assuming an elastic-perfectly plastic compressive behaviour of the foam core. An elastic part of indentation response is described using the Winkler foundation model. Upon removal of the load, an elastic unloading response of the foam core is assumed. Also, finite element (FE) analysis of static indentation and unloading of sandwich beams is performed using the FE code ABAQUS. The foam core is modelled using the crushable foam material model. To obtain input data for the analytical model and to calibrate the crushable foam model in FE analysis, the response of the foam core is experimentally characterized in uniaxial compression, up to densification, with subsequent unloading and tension until tensile fracture. Both models can predict load–displacement response of sandwich beams under static indentation and a residual dent magnitude in the face sheet after unloading along with residual strain levels in the foam core at the unloaded equilibrium state. The analytical and FE analyses are experimentally verified through static indentation tests of composite sandwich beams with two different foam cores. The load–displacement response, size of a crushed core zone and the depth of a residual dent are measured in the testing. A digital speckle photography technique is also used in the indentation tests in order to measure the strain levels in the crushed core zone. The experimental results are in good agreement with the analytical and FE analyses.