Photographing impact of molten molybdenum particles in a plasma spray

Plasma-sprayed molten molybdenum particles (∼40 μm in diameter) were photographed impinging at high velocity (∼140 m/s) on a glass substrate at room temperature. An optical sensor detected thermal radiation emitted by a droplet as it approached the substrate and activated a time delay unit. After a selected time interval, an Nd:YAG laser was triggered, emitting a 5 ns pulse that provided illumination for a charge-coupled device (CCD) camera to photograph the impacting droplet through a long-range microscope. By varying the delay before pulsing the laser, different stages of droplet deformation were recorded. Impacting droplets spread into a thin circular film that ruptured and broke into small fragments. An optical detector recording thermal radiation from the impacting droplet gave a signal that increased as the droplet spread out, reached a maximum when the liquid film began to rupture, and decreased as portions of the droplet recoiled because of surface tension and then flew out of view of the photodetector.     

Studies on phytosterol oxides. II: Content in some vegetable oils and in French fries prepared in these oils

Hydrogenated rapeseed oil/palm oil blend, sunflower oil and high-oleic sunflower oil, and French fries fried in these oils were assessed for contents of sterol oxidation products. Different oxidation products of phytosterols (7α- and 7β-hydroxy-sito-and campesterol, 7-ketosito- and 7-ketocampesterol, 5α,6α-epoxy-sito- and campesterol, 5β,6β-epoxy-sito-and campesterol, dihydroxysitosterol and dihydroxycampesterol) were identified and quantiated by gas chromatography (GC) and GC-mass spectroscopy. Rapeseed oil/palm oil blend contained 41 ppm total sterol oxides before frying operations. After two days of frying, this level was increased to 60 ppm. Sunflower oil and high-oleic sunflower oil had 40 and 46 ppm sterol oxides, respectively, before frying operations. After two days of frying operations, these levels increased to 57 and 56 ppm, respectively. In addition to campesterol and sitosterol oxidation products, small amounts of 7α- and 7β-hydroxystigmasterol were detected in the oil samples. Total sterol oxides in the lipids of French fries fried at 200°C in rapeseed oil/palm oil blend, sunflower oil, and high-oleic sunflower oil were 32, 37, and 54 ppm, respectively. The levels of total oxidized sterols, calculated per g sample, ranged from 2.4 to 4.0 ppm. In addition to the content of phytosterol oxides, full scan mass spectra of several oxidation products of stigmasterol are reported for the first time. Part of these results were presented at the 86th Annual Meeting of the AOCS, May 7–11, 1995, San Antonio, TX.     

The role of pressure on thin amorphous carbon films deposited using microwave surface wave plasma CVD

We report the effects of gas composition pressure (GCP) on the optical, structural and electrical properties of thin amorphous carbon (a-C) films grown on p-type silicon and quartz substrates by microwave surface wave plasma chemical vapor deposition (MW SWP CVD). The films, deposited at various GCPs ranging from 50 to 110 Pa, were studied by UV/VIS/NIR spectroscopy, atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy and current–voltage characteristics. The optical band gap of the a-C film was tailored to a relatively high range, 2.3–2.6 eV by manipulating GCPs from 50 to 110 Pa. Also, spin density strongly depended on the band gap of the a-C films. Raman spectra showed qualitative structured changes due to sp³/sp² carbon bonding network. The surfaces of the films are found to be very smooth and uniform (RMS roughness < 0.5 nm). The photovoltaic measurements under light illumination (AM 1.5, 100 mW/cm²) show that short-circuit current density, open-circuit voltage, fill factor and photo-conversion efficiency of the film deposited at 50 Pa were 6.4 μA/cm², 126 mV, 0.164 and 1.4 × 10^− 4% respectively.     

Compositional analysis of biodegradable polyphosphoester copolymers using nmr spectroscopic methods

The chemical composition and quantitative molar ratios among all components of biodegradable polyphosphoester copolymers of DL ‐lactide and ethylphosphate were determined by a comprehensive set of NMR spectroscopic methods. The polyphosphoester copolymers studied were synthesized using condensation polymerization of oligomeric DL ‐lactide prepolymers and ethyl dichlorophosphate. Conclusive identification of the chemical shift patterns of all functional groups in the copolymers required additional NMR methods such as ³¹P‐NMR and two‐dimensional ¹H–¹H COSY NMR, in addition to the synthesis and comparative NMR analysis of model compounds possessing identical phosphoester linkages in the polyphosphoester copolymers. For the polymers synthesized using the bulk polycondensation process, ¹H–¹H COSY NMR analysis revealed the presence of a small amount of side products that were undetected by ¹H‐NMR alone. These side reactions most likely occurred between the pendant ethoxy group of the phosphoesters and the hydrogen chloride gas generated in the bulk polycondensation process. ³¹P‐NMR spectra of the copolymers revealed a consistent triple‐peak pattern characteristic of phosphoesters linked to a racemic mixture of D,L ‐lactides. These results offered new insight into the side reactions occurring in bulk polymerization of polyphosphoesters and provided a powerful tool of characterizing complex biodegradable polymers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 4021–4031, 2003     

Glass Formation and Properties in the System Calcia-Gallia-Silica

The glass-formation region of the calcia-gallia-silica system was determined. The glasses within this region were measured to have a density of 3 to 4 g/cm³, a refractive index of 1.6 to 1.73, an Abbe number between 35 and 58, a thermal expansion coefficient of 6.5 × 10⁻⁷/°C to 11.5 × 10⁻⁷/°C, softening temperatures between 730° and 790°C, and a Vickers microhardness of 5.2 to 7.3 GPa. Crystalline phases were identified along the glass-formation boundary. Infrared transmission spectra were used to explain glass structures and their effect on glass properties. The results suggest that the role of calcia in the glass structure is similar to that for calcia in calcium aluminosilicate glasses.     

The performance of a hybrid routing intelligent algorithm in a mobile ad hoc network

End-to-end delay, power consumption, and communication cost are some of the most important metrics in a mobile ad hoc network (MANET) when routing from a source to a destination. Recent approaches using the swarm intelligence (SI) technique proved that the local interaction of several simple agents to meet a global goal has a significant impact on MANET routing. In this work, a hybrid routing intelligent algorithm that has an ant colony optimisation (ACO) algorithm and particle swarm optimisation (PSO) is used to improve the various metrics in MANET routing. The ACO algorithm uses mobile agents as ants to identify the most feasible and best path in a network. Additionally, the ACO algorithm helps to locate paths between two nodes in a network and provides input to the PSO technique, which is a metaheuristic approach in SI. The PSO finds the best solution for a particle’s position and velocity and minimises cost, power, and end-to-end delay. This hybrid routing intelligent algorithm has an improved performance when compared with the simple ACO algorithm in terms of delay, power consumption, and communication cost.     

An industrial study of applying input space partitioning to test financial calculation engines

This paper presents results from an industrial study that applied input space partitioning and semi-automated requirements modeling to large-scale industrial software, specifically financial calculation engines. Calculation engines are used in financial service applications such as banking, mortgage, insurance, and trading to compute complex, multi-conditional formulas to make high risk financial decisions. They form the heart of financial applications, and can cause severe economic harm if incorrect. Controllability and observability of these calculation engines are low, so robust and sophisticated test methods are needed to ensure the results are valid. However, the industry norm is to use pure human-based, requirements-driven test design, usually with very little automation. The Federal Home Loan Mortgage Corporation (FHLMC), commonly known as Freddie Mac, concerned that these test design techniques may lead to ineffective and inefficient testing, partnered with a university to use high quality, sophisticated test design on several ongoing projects. The goal was to determine if such test design can be cost-effective on this type of critical software. In this study, input space partitioning, along with automation, were applied with the help of several special-purpose tools to validate the effectiveness of input space partitioning. Results showed that these techniques were far more effective (finding more software faults) and more efficient (requiring fewer tests and less labor), and the managers reported that the testing cycle was reduced from five human days to 0.5. This study convinced upper management to begin infusing this approach into other software development projects.     

Memetic cooperative coevolution of Elman recurrent neural networks

Cooperative coevolution decomposes an optimisation problem into subcomponents and collectively solves them using evolutionary algorithms. Memetic algorithms provides enhancement to evolutionary algorithms with local search. Recently, the incorporation of local search into a memetic cooperative coevolution method has shown to be efficient for training feedforward networks on pattern classification problems. This paper applies the memetic cooperative coevolution method for training recurrent neural networks on grammatical inference problems. The results show that the proposed method achieves better performance in terms of optimisation time and robustness.     

Effect of thiophosphoryl compounds as accelerators and coupling agents on the vulcanization of NR‐XNBR blend

The effect of a number of thiophosphoryl compounds [viz., bis(isobutyl) thiophosphoryl di‐, tri‐, and tetrasulfides and bis(dicyclohexyl) thiophopsphoryl di‐, tri‐, and tetrasulfides] on natural rubber (NR)‐carboxylated nitrile rubber (XNBR) blend was studied. All these thiophosphoryl compounds are capable of forming interrubber links leading to covulcanized blends which exhibit a fair degree of synergism with respect to physical properties, the maximum being obtained at the 25% NR and 75% XNBR blend composition. This is an obvious claim that the blend under investigation is technologically compatible, having some degree of interrubber interaction which is enhanced in case of two‐stage vulcanization. The existence of interrubber interaction is judged by the swelling experiment. The blend morphology assessed by SEM micrographs corroborates the foregoing observations and accounts for the significant improvement in physical properties of the blend vulcanizates, particularly in two‐stage vulcanization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3286‐3299, 2002     

Color and Selected Properties of PbO─BiO1.5─GaO1.5 Glasses

The density; molar volume; thermal expansion coefficient; dissolution rate in water, HC1, and NaOH; glass transition and crystallization temperatures; and the absorption edge in the ultraviolet-visible and infrared were measured for PbO─BiO1.5─GaO1.5 glasses. The range of compositions investigated was x PbO (100 − (x + y) )BiO_1.5. yGaO_1.5 for x between 20 and 60 cat% and y of 20, 25, 30, and 35 cat%. The glass-forming tendency increased with increased GaO_1.5 and decreased with increased PbO or BiO_1.5. The compositional dependence of these properties was consistent with the weight, size, charge, and bond strength of the cations. The Ga^{3 +} ions in these glasses are believed to act primarily as network-forming cations, whereas the majority of the Bi³⁺ and Pb²⁺ ions behave as network-modifying cations. It is suggested that a small friction of the lead ions are present as Pb⁴⁺. Depending upon melting conditions, these glasses ranged in color from brown to yellow. Various attempts, including containerless melting, were made to obtain colorless glasses, but no conditions were found which totally eliminated the color. The least color (pale yellow) was obtained when the glasses were melted in an air or nitrogen atmosphere in an alumina or gold crucible.