X-ray and electron microscopical studies of thin films of (Cd1−xZnx)S solid solution

A series of (Cd_1–x Zn _x )S powders phosphors and thin layers prepared by thermal evaporation of solid solution were studied. The phosphors used were 41% ZnS: 59% CdS with a cobalt concentration from 0 to 0.325%. The analysis of the structure of films of different thicknesses using X-ray diffraction technique confirms that the calculated relative intensities of the planes show considerable differences from the experimental results. For film thicknesses 70 nm thea axis is normal to the substrate, while at greater thicknesses (273 nm) thec axis is practically normal to the substrate. The effect of the electron beam on the solid solution indicates that layers decomposed leaving the grain boundaries decorated by metallic cadmium and zinc particles.     

Pharmacological Evidence on Augmented Antiallodynia Following Systemic Co-Treatment with GlyT-1 and GlyT-2 Inhibitors in Rat Neuropathic Pain Model

The limited effect of current medications on neuropathic pain (NP) has initiated large efforts to develop effective treatments. Animal studies showed that glycine transporter (GlyT) inhibitors are promising analgesics in NP, though concerns regarding adverse effects were raised. We aimed to study NFPS and Org-25543, GlyT-1 and GlyT-2 inhibitors, respectively and their combination in rat mononeuropathic pain evoked by partial sciatic nerve ligation. Cerebrospinal fluid (CSF) glycine content was also determined by capillary electrophoresis. Subcutaneous (s.c.) 4 mg/kg NFPS or Org-25543 showed analgesia following acute administration (30–60 min). Small doses of each compound failed to produce antiallodynia up to 180 min after the acute administration. However, NFPS (1 mg/kg) produced antiallodynia after four days of treatment. Co-treatment with subanalgesic doses of NFPS (1 mg/kg) and Org-25543 (2 mg/kg) produced analgesia at 60 min and thereafter meanwhile increased significantly the CSF glycine content. This combination alleviated NP without affecting motor function. Test compounds failed to activate G-proteins in spinal cord. To the best of our knowledge for the first time we demonstrated augmented analgesia by combining GlyT-1 and 2 inhibitors. Increased CSF glycine content supports involvement of glycinergic system. Combining selective GlyT inhibitors or developing non-selective GlyT inhibitors might have therapeutic value in NP.     

Investigation of transport phenomena in a hybrid ion exchange-electrodialysis system for the removal of copper ions

Hybrid ion exchange electrodialysis processes allow the removal of metal ions from dilute waste liquids and the recovery of more concentrated solutions. The work reported here was aimed at investigating the two steps in the treatment process, namely, adsorption of metal ions onto the packed bed of resin and electromigration (i.e., the transport of these ions in the complex system under the applied electrical field). The case of copper sulfate was investigated. Dowex resins with a cross-linking degree of 2 and 8% were used. The flux of copper through the resin bed and the current efficiency for ion transfer to the cathode compartment were determined as a function of potential gradient and copper ionic fraction in the bed. Apparent diffusion coefficients of Cu²⁺ in the overall system were deduced from the experimental data.     

A game attention model for efficient bit rate allocation in cloud gaming

The widespread availability of broadband internet access and the growth in server-based processing have provided an opportunity to run games away from the player into the cloud and offer a new promising service known as cloud gaming. The concept of cloud gaming is to render a game in the cloud and stream the resulting game scenes to the player as a video sequence over a broadband connection. To meet the stringent network bandwidth requirements of cloud gaming and support more players, efficient bit rate reduction techniques are needed. In this paper, we introduce the concept of game attention model (GAM), which is basically a game context-based visual attention model, as a means for reducing the bit rate of the streaming video more efficiently. GAM estimates the importance of each macro-block in a game frame from the player’s perspective and allows encoding the less important macro-blocks with lower bit rate. We have evaluated nine game video sequences, covering a wide range of game genre and a spectrum of scene content in terms of details, motion and brightness. Our subjective assessment shows that by integrating this model into the cloud gaming framework, it is possible to decrease the required bit rate by nearly 25 % on average, while maintaining a relatively high user quality of experience. This clearly enables players with limited communication resources to benefit from cloud gaming with acceptable quality.     

Structural material from waste plastic

In efforts to contribute to community development, particularly in the context of Egyptian communities, waste plastics materials were successfully recycled without the difficult task of separation and reused to economically produce new structural material. Recycling was performed by mixing molten waste plastics with sand to produce these new materials. Samples with different percentages of plastics and different particle sizes of sand were used in the process. Materials showed acceptable density and high compressive strength, which was shown to be at a maximum with contents of about 30–40% waste plastic. Furthermore, certain types of sand having different colors were used to produce attractive materials, suitable for decorative uses. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2543–2547, 2004     

Effects of cobalt and potassium doping on thermal stability and electrical properties of radiation grafted acrylic acid onto poly(tetrafluoroethylene ethylene) copolymer films

Grafted copolymer of poly(tetrafluoroethylene ethylene) (ET) with acrylic acid (AAc) was prepared by direct radiation method. The obtained films were modified by treating with small amounts of Co²⁺ and K⁺ ions (1.0 wt %). The effects of such treatment on the thermal stability and electrical conductivity of these films were studied. Cobalt treatment did not much affect the thermal degradation of the films. The results obtained revealed that k⁺ treatment enhanced the thermal degradation of ET‐g‐PAAc, which started 273 K lower than that observed in the case of the untreated and Co²⁺‐treated films. Potassium and cobalt treatment of the investigated films increased their electrical conductivity (σ) and decreased the activation energy ΔE_σ. The increase in σ values was, however, more pronounced in the case of K⁺‐treated film. These results were discussed in terms of the effective increase in the hydrophilicity of the films, especially those treated with potassium. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 867–871, 2005     

Oil thermal annealed nano‐structured indium tin oxide thin films for display applications

Indium tin oxide‐coated thin films (200 nm) are deposited on glass substrates by using R.f. sputtering technique. Here, we investigate the influence of new technique of treatment, which is called as “oil thermal annealing” on the nano‐structured indium tin oxide thin films at fixed temperature (150 °C) which improves adhesion strength, electrical conductivity and optical properties (transmittance) of the films. Oil thermal annealing is used to reduce inherent defects that may be introduced during the prepared thin film and cooling processes. Proposed technique is highly suitable for liquid crystal displays, solar cells and organic light emitting diodes, and many other display‐related applications.     

Dynamic mechanical properties of agricultural residues‐filled polystyrene

Agricultural residues (cotton straw) were added as very small particles to polystyrene (PS) at different weight ratios by using a melt‐mixing technique. The dynamic mechanical tests were performed over a wide range of temperatures and frequencies by using an ARES rheometer (Rheometrics Scientific) operated in the dynamic mode. The dynamic mechanical properties in terms of the storage modulus (G′), loss modulus (G″), compliance moduli, loss tangent, and dynamic viscosity were studied and compared for PS and PS composite. The results showed that the dynamic mechanical moduli and viscosity were found to increase with the addition of cotton straw and rise further with its loading increasing. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 37–40, 2004     

Yield response of lentil to directly applied and residual phosphorus in a Mediterranean environment

The response of lentil grown under rainfed conditions to directly applied and residual phosphorus (P) was described by a modified Mitscherlich equation, accounting for the effects of rainfall on (1) potential yield, and (2) the availability of soil-P to the crop. The response of lentil yield to directly applied and residual P was studied in two-course cereal–lentil rotational trials under rainfed conditions in a Mediterranean-type environment. Cereal crops were grown at different P application rates during 4 growing seasons at 3 sites, representing different rainfall zones in northwest Syria. Lentil (Lens culinaris Med.) was grown during 4 seasons at the same sites, each lentil crop following a cereal crop. In 3 out of 4 lentil-growing seasons, additional P was applied to lentil in subplots to compare the residual and direct effects of P application. The initial contents of extractable soil-P (P-Olsen) were low at all sites, in the range of 2–5 ppm P. Under the conditions of the experiments, lentil appeared to benefit slightly more from P applied to the preceding wheat crop (residual P) than from directly applied P. It is shown that the modified Mitscherlich equation could be used as a basis for P fertilizer recommendations for rainfed farming. As for lentil, it was concluded that a single application of P to the wheat crop in a wheat/lentil rotation could reduce the cost of lentil production, without reducing lentil yield.