Emergence of Antibiotic Resistance in Listeria monocytogenes Isolated from Food Products: A Comprehensive Review

Listeria monocytogenes is an opportunistic pathogen that has been involved in several deadly illness outbreaks. Future outbreaks may be more difficult to manage because of the emergence of antibiotic resistance among L. monocytogenes strains isolated from food products. The present review summarizes the available evidence on the emergence of antibiotic resistance among L. monocytogenes strains isolated from food products and the possible ways this resistance has developed. Furthermore, the resistance of food L. monocytogenes isolates to antibiotics currently used in the treatment of human listeriosis such as penicillin, ampicillin, tetracycline, and gentamicin, has been documented. Acquisition of movable genetic elements is considered the major mechanism of antibiotic resistance development in L. monocytogenes. Efflux pumps have also been linked with resistance of L. monocytogenes to some antibiotics including fluoroquinolones. Some L. monocytogenes strains isolated from food products are intrinsically resistant to several antibiotics. However, factors in food processing chains and environments (from farm to table) including extensive or sub‐inhibitory antibiotics use, horizontal gene transfer, exposure to environmental stresses, biofilm formation, and presence of persister cells play crucial roles in the development of antibiotic resistance by L. monocytogenes.     

Initial-strain analysis of silo—material interaction

Modifications to a finite element program developed in a prior study were extended for an initial-strain analysis of horizontal bending moments and hoop tension developed during bisymmetrical eccentric discharge. The results obtained by the newly developed initial-strain method, by the prior study, and those required by ACI Standard 313-77, were compared for a circular concrete silo.Although a significant difference in bending moment was obtained by the initial-strain and linear analysis methods, the steel reinforcement required was nearly the same at the lower elevation. However, at the upper elevation, approximately 50% more reinforcement was required for the initial-strain analysis. The reinforcement required by ACI Standard 313-77 was comparable to that for the initial-strain method at the higher elevation, and greater for the lower elevation.     

Combined microwave and enzymatic treatments for ��-lactoglobulin and bovine whey proteins and their effect on the IgE immunoreactivity

Effect of combined microwave (MW) and enzymatic hydrolysis on the human immunoglobulin E (IgE)-binding properties of ??-lactoglobulin (??-lg) and other whey proteins (WP) was investigated. Separated ??-lg and full whey protein isolate (WPI) were hydrolyzed with trypsin, chymotrypsin, mixture of trypsin/chymotrypsin, and pepsin at three microwave power levels: 50?W during 1 and 5?min, 100 and 200?W during 1 and 3?min. The immunoreactivity of the obtained hydrolysates resulting from combined microwave protease treatment was assessed using sera of young patients allergic to bovine whey proteins. The application of microwave treatment at 200?W enhances the hydrolysis of ??-lg by pepsin in 3?min and decreases significantly its immunoreactivity. The extensive hydrolysis of the microwave-treated ??-lg and WPI with trypsin, chymotrypsin, and the mixture of trypsin with chymotrypsin did not have an impact on the IgE binding of the products obtained in all the studied conditions.     

Proteolytic degradation of ewe milk proteins during fermentation of yoghurts and storage

Yoghurts are mostly produced from cow milk and to a very limited extent from ewe milk. The evolution of caseins and whey proteins in ovine milk submitted to different thermal treatments (63 degrees C/30 min; 73 degrees C/15 min; 85 degrees C/10 min or 96 degrees C/5 min) was followed during fermentation of yoghurts and during their storage up to 14 days, using two different sets of starters. One set of starter LAB was a "ropy" culture (YC-191), which is a well-defined mixed strain culture containing Streptococcus thermophilus ST-143 and Lactobacillus delbrueckii subsp. bulgaricus (LB-18 and LB-CH2). The other set of starter bacteria (YC-460) was a standard yoghurt culture("non-ropy") containing mixed strain culture of Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus. Contents of free amino groups in produced yoghurts increased gradually during the fermentation, up to a maximal value obtained after 4 h fermentation, then they did not change significantly during storage of yoghurt produced with YC-191 starter. In contrary, a large drop in the amount of free amino groups was observed in the first 24 h of storage in the case of yoghurt made with YC-460 indicating that microorganisms continue still to grow in low temperatures. During fermentation and storage of both yoghurt types, alpha-lactalbumin was hydrolyzed to a slightly bigger extent than beta-lactoglobulin. During fermentation, beta-casein was slightly more degraded than alpha(s)-caseins; however, the opposite was observed during storage up to 14 days. Generally, a more intense heat pretreatment led to a higher degradation of whey proteins and caseins during fermentation and storage. Differences in proteolytic activity between the two starters used (whey proteins more degraded by YC-191; caseins more degraded by YC-460) may lead to improvement in production and formulation of yoghurts differing in their physicochemical and rheological properties.     

Physicochemical and sensory characteristics of no‐bake wheat–soy snack bars

BACKGROUND: Health and wellness is a trend observed throughout ready‐to‐eat cereals, cereal health bars. Therefore, the main objectives of this research were to produce a low cost, acceptable, nutritious and healthy wheat‐ and soy‐based bar under no‐bake conditions. Also, the physical, chemical, microbial, acceptability and the nutritional value of this product were studied. Six different bars were produced: a wheat bar (WB), a wheat bar with coating (WBC), a wheat and soy bar with coating (WSBC), a soy bar with coating (SBC), a wheat bar with 3% glycerin (WB3%), and a wheat bar with 6% glycerine (WB6%). RESULTS: WB and WBC had the highest water activities while WSBC had the lowest. The three bars with coating had higher L and lower b values, which indicates that they were lighter and not as highly yellow coloured as the wheat samples. WSBC had the lowest value for hardness while the SBC and WBC had the highest. SBC received the highest scores for overall acceptability, appearance, sweetness, flavour and texture while WSBC received the second highest score in all categories. CONCLUSION: It appears that consumers prefer the soy varieties to the wheat bars. These types of bars can aid in feeding the general population, which is becoming increasingly concerned with nutrition and convenience. Copyright © 2010 Society of Chemical Industry     

Preparation and properties of probiotic concentrated yoghurt (labneh) fortified with conjugated linoleic acid

Milk of high conjugated linoleic acid (CLA) level (1.25 g per 100 g milk fat) was produced by inclusion of fish oil and rousted soy bean in the ration of Holstein cows as compared to 0.55 g per 100 g milk fat in the milk of animals receiving control diet. Milk of normal (control) and high CLA content (treatment) was spray‐dried. Labneh was made from 20 g L^?1 reconstituted milk using 3 mL per 100 mL yoghurt starter and 2 mL per 100 mL of probiotic cultures of Lactobacillus casei or Lactobacillus acidophilus. The control (C) and high CLA (T) labneh were analysed chemically and microbiologically, and their viscosities were determined during cold storage for 15 days. The fat content of labneh of high CLA was less than that of the control, but the total solids (TS) were unaffected by the CLA level. Labneh made with Lb. acidophilus had lower TS and higher acidity, exopolysaccharides and acetaldehyde contents and viscosity than that made with the use of Lb. casei. Labneh from the different treatments retained high counts of the added probiotic (>10⁸ cfu g^?1) throughout the storage period. The storage period had significant effects on all parameters determined.     

The Effect of Methylcellulose,Temperature, and Microwave Pretreatment on Kinetic of Mass Transfer During Deep Fat Frying of Chicken Nuggets

The aim of this study was to determine the effect of microwave pretreatment, usage of methylcellulose, oil temperature, and frying time on mass transfer during deep fat frying of chicken nuggets. Methylcellulose was used in batter and as a coating on product. Microwave with two power densities namely 3.7 and 7.4 W/g was used for reduction of initial moisture content of samples before frying. Frying was performed at three temperatures (150 °C, 170 °C, and 190 °C) and five intervals (0.5, 1, 2, 3, and 4 min) in the sunflower oil. The least oil content was observed when MC was used as a coating layer on non-precooked samples fried at 190 °C. Oil absorption of samples with MC in batter was partially higher compared to control samples. This could be attributed to the rheology of batters. The first-order kinetic model was fitted to moisture and oil content. For determining the correlation between temperature and moisture diffusivity, Arrhenius equation was used. The constant rate for moisture and oil transfer was in the range of 2.2–5 and 0.023–2.67 s^?1, respectively. Effective moisture diffusivity values were between 1.43?×?10^?8 and 3.24?×?10^?8 m²/s. Activation energy ranged between 0.71 and 1.71 kJ/mol.     

Use of FIB to Study ZDDP Tribofilms

Focussed ion beam milling (FIB) followed by TEM has been used to study ZDDP tribofilms on rubbed steel surfaces. It has been found that the impact of high energy platinum and gallium ions during FIB causes significant morphological and structural changes to the uppermost 30–50 nm of a ZDDP tribofilm. This can be prevented by the low energy deposition of a quite thick gold layer prior to installation of the sample in the FIB facility. This problem, and its solution, have been quite widely reported in the non-tribology literature but have not previously been highlighted in the application of FIB to study tribological surfaces. It has also been found, using this gold pre-deposition method, that the bulk of the ZDDP tribofilm studied has a polycrystalline structure.