Theoretical Analysis of the Onset of Gas Entrainment from a Stratified Region through a Single Side‐Oriented Branch at Moderate Froude Numbers

A theoretical investigation has been conducted for the prediction of the critical height at the onset of gas entrainment during single discharge from a stratified, two‐phase region, through a branch installed on an inclined flat wall. The predicted critical height at the onset of gas entrainment was proven to be a function of Froude number (Fr) and density ratio of the interface fluids. Three different experimental data sets at wall inclination angles of zero, 45 and 90 degrees (i.e. side, inclined and bottom branches) were used for comparisons. A good concurrence was illustrated between the experimental and theoretical values.     

Designing zinc oxide nanostructures (nanoworms,nanoflowers, nanowalls,and nanorods) by pulsed laser ablation technique for gas-sensing application

In this study, pulsed laser ablation technique, also known as pulsed laser deposition (PLD), is used to design and grow zinc oxide (ZnO) nanostructures (nanoworms, nanowalls, and nanorods) by template/seeding approach for gas-sensing applications. Conventionally, ZnO nanostructures used for gas-sensing have been usually prepared via chemical route, where the 3D/2D nanostructures are chemically synthesized and subsequently plated on an appropriate substrate. However, using pulsed laser ablation technique, the ZnO nanostructures are structurally designed and grown directly on a substrate using a two-step temperature-pressure seeding approach. This approach has been optimized to design various ZnO nanostructures by understanding the effect of substrate temperature in the 300-750°C range under O₂ gas pressure from 10-mTorr to 10 Torr. Using a thin ZnO seed layer as template that is deposited first at substrate temperature of ~300°C at background oxygen pressure of 10 mTorr on Si(100), ZnO nanostructures, such as nanoworms, nanowalls, and nanorods (with secondary flower-like growth) were grown at substrate temperatures and oxygen background pressures of (550°C and 2 Torr), (550°C and 0.5 Torr), and (650°C and 2 Torr), respectively. The morphology and the optical properties of ZnO nanostructures were examined by Scanning Electron Microscope (SEM-EDX), X-ray Diffraction (XRD), and photoluminescence (PL). The PLD-grown ZnO nanostructures are single-crystals and are highly oriented in the c-axis. The vapor-solid (VS) model is proposed to be responsible for the growth of ZnO nanostructures by PLD process. Furthermore, the ZnO nanowall structure is a very promising nanostructure due to its very high surface-to-volume ratio. Although ZnO nanowalls have been grown by other methods for sensor application, to this date, only a very few ZnO nanowalls have been grown by PLD for this purpose. In this regard, ZnO nanowall structures are deposited by PLD on an Al₂O₃ test sensor and assessed for their responses to CO and ethanol gases at 50 ppm, where good responses were observed at 350 and 400°C, respectively. The PLD-grown ZnO nanostructures are very excellent materials for potential applications such as in dye-sensitized solar cells, perovskite solar cells and biological and gas sensors.     

A global optimal formulation for the water integration in eco-industrial parks considering multiple pollutants

A mathematical programming formulation for the water integration in eco-industrial parks considering streams with several pollutants is presented. The formulation is based on a superstructure that allows the wastewater reuse in the same plant, the water exchange with different plants, and a shared set of interceptors that must be selected to determine the network configuration that satisfies process equipments and environmental constraints. The model formulation considers wastewater with several pollutants, and optimizes the network according to the minimum total annual cost, which includes the costs of fresh water, piping and regeneration. A new discretization approach is also proposed to handle the large set of bilinear terms that appear in the model in order to yield a near global optimal solution. The results obtained in several examples show considerable savings with respect to the solutions of the individual plant integration policy commonly employed for these types of problems.     

Surface Properties and Thermodynamic Parameters of Some Sugar-Based Ethoxylated Amine Surfactants: 1—Synthesis,Characterization, and Demulsification Efficiency

Several ethoxylated sugar-based amine surfactants have been synthesized and characterized by IR and ¹HNMR spectroscopy. The surface activity of the prepared compounds has been thoroughly studied and some of their surface properties (such as CMC, Γ_max, and A _min) have been calculated. The surface properties of the prepared compounds were correlated to their chemical structure. It was found that CMC decreases when increasing the molecular weight of polyethylene glycols, whereas A _min increases. Furthermore, the thermodynamic parameters of adsorption and micellization were also calculated. They include ΔG, ΔH, and ΔS of micellization and adsorption. The data show that the synthesized surfactants favor adsorption, so that they can be used as demulsifiers for crude oil emulsions. In this respect, the demulsification test was carried out and the results of demulsification efficiency were correlated to the chemical composition of the investigated compounds. Some factors that affect the demulsification efficiency were also considered.     

Synthesis and Evaluation of a New Cationic Surfactant for Oil-Well Drilling Fluid

A new additive cationic surfactant for drilling fluid was synthesized by alkylation of coal tar phenol with tetradecyl alcohol; then, the alkyl phenol reacts with formaldehyde and amine to produce the Mannich base product. This product was reacted with sodium chloroacetate to produce the cationic surfactant; the structure of the synthesized surfactant was confirmed by FTIR analysis, evaluation of the prepared surfactant by surface properties such as surface tension, emulsification power, and wetting power. The prepared cationic surfactant showed good results when utilized in the formulation of both oil-based mud and synthetic-based mud as the primary emulsifier.     

Direct electron transfer from glucose oxidase immobilized on a nano-porous glassy carbon electrode

A pair of well-defined and reversible redox peaks was observed for the direct electron transfer (DET) reaction of an immobilized glucose oxidase (GOx) on the surface of a nano-porous glassy carbon electrode at the formal potential (E°′) of −0.439 V versus Ag/AgCl/saturated KCl. The electron transfer rate constant (k_s) was calculated to be 5.27 s⁻¹. The dependence of E°′ on pH indicated that the direct electron transfer of the GOx was a two-electron transfer process, coupled with two-proton transfer. The results clearly demonstrate that the nano-porous glassy carbon electrode is a cost-effective and ready-to-use scaffold for the fabrication of a glucose biosensor.     

MHD flow and heat transfer of a micropolar fluid over a nonlinear stretching surface with variable surface heat flux and heat generation

An analysis has been carried out to study magnetohydrodynamic boundary layer flow and heat transfer of an electrically conducting micropolar fluid over a nonlinear stretching surface with variable wall heat flux in the presence of heat generation/absorption and a non‐uniform transverse magnetic field. The governing system of partial differential equations is first transformed into a system of ordinary differential equations using similarity transformation. The transformed equations are solved numerically. Results for the dimensionless velocity, micro‐rotation, and temperature profiles are displayed graphically delineating the effects of various parameters characterising the flow. The results show that the velocity profile decreases as the magnetic parameter and the velocity exponent increase, while it increases as the material parameter increases. The results show also that the temperature profile increases as the magnetic parameter, the velocity exponent, and the heat generation parameter increase. Furthermore, the temperature profile decreases as the material parameter, the heat absorption parameter, and the Prandtl number increase.     

Influence of Single-Walled Carbon Nanotubes on the Performance of Poly(Azomethine-Ether) Composite Materials

The present work is aimed to fabricate a new set of composite materials containing conducting poly(azomethine-ether) reinforced with single-walled carbon nanotubes in the form of single-walled carbon nanotube/poly(azomethine-ether)_1–5 for excellent enhanced thermal as well as conducting behavior of poly(azomethine-ether). Single-walled carbon nanotubes of variable loading have been embedded into conducting poly(azomethine-ether) using in situ polymerization technique. Before attempting the polymerization, 1,3-thiazole established poly(azomethine-ether) and its conformable monomers have been prepared and their chemical structures have been correlated by spectral analyses. Furthermore, η_inh and M_w values for poly(azomethine-ether) were found 0.89?dL?g^?1 and 39723.6, respectively. The fabricated single-walled carbon nanotube/poly(azomethine-ether)_1–5 composites were specified and characterized by wide-angle X-ray diffraction patterns, Fourier transform infrared spectroscopy, thermal behavior, scanning electron microscopy, and transmission electron microscopy characterization techniques. A perfect indicative response for this composite material was estimated by Fourier transform infrared spectra and X-ray diffraction as well. Both techniques displayed all intensive characteristic peaks regarding single-walled carbon nanotubes and poly(azomethine-ether) in the spectra or diffraction pattern for single-walled carbon nanotube/poly(azomethine-ether)_1–5. The role of single-walled carbon nanotubes on the performance of poly(azomethine-ether) was considerably examined. Single-walled carbon nanotube/poly(azomethine-ether)_1–5 showed relatively higher thermal stability. Single-walled carbon nanotube/poly(azomethine-ether)₁ displayed the lowest final composite degradation temperature value (552°C), whereas single-walled carbon nanotube/poly(azomethine-ether)₅ displayed the highest value (621°C). T₁₀ and T₂₅ values showed a gradual temperature increased while single-walled carbon nanotubes increased. Single-walled carbon nanotube/poly(azomethine-ether)₁ showed the lowest thermal stability and single-walled carbon nanotube/poly(azomethine-ether)₅ showed the highest thermal stability between all fabricated products. Furthermore, transmission electron microscopy images showed a prominent increase in single-walled carbon nanotubes diameters (40–60?nm). The conductivity values were significantly increased while single-walled carbon nanotubes content was increased and reached to the semiconductors. ε′ values were also increased in both single-walled carbon nanotube/poly(azomethine-ether)_4,5 which have higher single-walled carbon nanotubes content.     

Aliphatic polyurethane–montmorillonite nanocomposite coatings: Preparation,characterization, and anticorrosive properties

Polyurethane (PU)–clay nanocomposite coatings were prepared by a sonication method. The stability and morphology of these coatings was characterized by turbidometry, X‐ray diffraction, and transmission electron microscopy. The anticorrosive properties of these coatings were investigated by salt‐spray and electrochemical impedance spectroscopy methods. According to the results, dispersed nanoclay layers in the matrix of the nanocomposite coating compositions led to superior anticorrosive characteristics compared to those of pure PU coatings. The best results were obtained with coatings containing about 5 wt % clay. The resistance of the coating containing 5% clay was about 9.002 GΩ after 225 days of immersion in a 3.5 wt % NaCl solution, whereas it was only 97 kΩ for the pure PU coating. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

ZnIn2S4/g-C3N4 Nanocomposite for Proficient Elimination of Hg (II) under Visible Light

Journal of Inorganic and Organometallic Polymers and Materials - The present work offers beneficial method for Hg (II) elimination from aqueous solution. ZnIn2S4/g-C3N4 nanocomposites were...