Microstructure and Optical Bandgap of Cobalt Selenide Nanofilms

Semiconductors - The purpose of this research is to explore the properties of CoSe nanostructured thin films on glass substrates prepared by a chemical solution deposition method. Special attention...     

Oligomeric Composition of Polyols From Fatty Acid Methyl Ester: The Effect of Ring‐Opening Reactants of Epoxide Groups

Commercial availability of fatty acid methyl ester (FAME) from palm oil targeted for biodiesel offers a good feedstock for the production of structurally well‐defined polyols for polyurethane applications. The effect of molecular weight (MW), odd and even carbon numbers, and the linear and branched structure reactants used in the ring‐opening reaction of epoxidized fatty acid methyl ester (E‐FAME) on the properties of polyols was investigated. Conversions of E‐FAME to PolyFAME polyols were confirmed by Fourier transform infrared analysis, oxirane oxygen content, and hydroxyl number. Gel permeation chromatography (GPC) calibrated against polyether polyols as a standard and vapor pressure osmometry were used for MW determination. GPC chromatograms of PolyFAME polyols clearly demonstrated the formation of oligomers during ring‐opening reactions. MW, and odd and even carbon numbers in a structure of linear diols and branched diol used in the syntheses of PolyFAME polyols did not have an effect on crystallinity, glass transition, or melt temperatures measured using Differential scanning calorimetry (DSC). PolyFAME polyols ring‐opened with water, methanol, and 1,2‐propanediol contained secondary hydroxyl groups, whereas PolyFAME polyols ring‐opened with linear diols contained a mixture of primary and secondary hydroxyl groups. It was found that the concentration of primary hydroxyl groups increased significantly by increasing the number of carbons from C2 to C3 in the linear diols. The viscosity of PolyFAME polyols also increased with the MW of linear diols used in the E‐FAME ring‐opening reaction. These findings would be beneficial for formulators in choosing the most cost effective polyols for polyurethane formulations.     

A Numerical and Experimental Investigation into Hot Stamping of Boron Alloyed Heat Treated Steels

Hot stamping of steel sheets using water or nitrogen cooling media was studied on a laboratory scale. Sheets of grade 22MnB5 boron steels in three different thicknesses were investigated and the results of experimental hot stamping tests were considered. Microstructural analysis, linear and surface hardness profiling as well as tensile tests of formed samples were carried out. After hot stamping, mostly fully martensitic microstructures, which yield ultra high strength levels, were produced. It is concluded that die cooling media, i.e., water or nitrogen, have a significant effect on material properties after hot stamping. Using liquid nitrogen as coolant in the punch instead of water increases yield strength by 50 to 65MPa. Moreover, the evolution of the temperature and force during the hot stamping process was simulated by using a coupled thermomechanical FEM program. The results of numerical simulation and experimental results are in good agreement.     

Sensitivity Analysis on Neural Network Algorithm for Primary Superheater Spray Modeling

ABSTRACT

Nonlinear, large inertia with long dead time is always associated with the main steam temperature parameter in coal fired power plant. Successful control of the main steam temperature within ±2°C of its setpoint is the ultimate target for coal-fired power plant operators. Two of the most common main steam temperature circuit are primary superheater spray and secondary superheater spray. Various methods were used to model the primary superheater spray control valve opening, and the neural network remains one of the most popular choices among researchers. It remains inconclusive which neural network algorithm types, setup, number of layers, and training algorithm will give the best result. As such, the paper shows the best setup for the neural network algorithm based on sensitivity analysis methodology for one hidden layer. The inputs selected for the neural network are generator output, main steam flow, total spray flow, and secondary superheater outlet steam temperature, while the output selected is primary spray flow control valve opening.     

Identification and Affinity Determination of Protein-Antibody and Protein-Aptamer Epitopes by Biosensor-Mass Spectrometry Combination

Analytical methods for molecular characterization of diagnostic or therapeutic targets have recently gained high interest. This review summarizes the combination of mass spectrometry and surface plasmon resonance (SPR) biosensor analysis for identification and affinity determination of protein interactions with antibodies and DNA-aptamers. The binding constant (K_D) of a protein–antibody complex is first determined by immobilizing an antibody or DNA-aptamer on an SPR chip. A proteolytic peptide mixture is then applied to the chip, and following removal of unbound material by washing, the epitope(s) peptide(s) are eluted and identified by MALDI-MS. The SPR-MS combination was applied to a wide range of affinity pairs. Distinct epitope peptides were identified for the cardiac biomarker myoglobin (MG) both from monoclonal and polyclonal antibodies, and binding constants determined for equine and human MG provided molecular assessment of cross immunoreactivities. Mass spectrometric epitope identifications were obtained for linear, as well as for assembled (“conformational”) antibody epitopes, e.g., for the polypeptide chemokine Interleukin-8. Immobilization using protein G substantially improved surface fixation and antibody stabilities for epitope identification and affinity determination. Moreover, epitopes were successfully determined for polyclonal antibodies from biological material, such as from patient antisera upon enzyme replacement therapy of lysosomal diseases. The SPR-MS combination was also successfully applied to identify linear and assembled epitopes for DNA–aptamer interaction complexes of the tumor diagnostic protein C-Met. In summary, the SPR-MS combination has been established as a powerful molecular tool for identification of protein interaction epitopes.     

Cathodic disbondment of epoxy coating with zinc aluminum polyphosphate as a modified zinc phosphate anticorrosion pigment

As an approach to improve the resistance of protective coatings to the disbondment, modification of the formulation through incorporation of zinc aluminum polyphosphate anticorrosion pigment representing third generation phosphates was examined in this paper. The data obtained from cathodic disbonding test, electrochemical impedance spectroscopy and pull-off indicated that introduction of zinc aluminum polyphosphate within epoxy coating could provide improved resistance to cathodic disbonding as well as superior adhesion strength. The superiority in the presence of the modified pigment was connected to deposition of a layer at the disbonding front and locally controlled pH as well. The precipitation restricting active zone available for electrochemical reaction was confirmed by SEM.     

SLIGA Based underwater weapon safety and arming system

 The Naval Surface Warfare Center, Indian Head Division (NSWCIHD) is applying microelectromechanical system (MEMS) technology to underwater weapon Safety and Arming (S&A) system development. MEMS technology provides an opportunity to develop a miniaturized S&A system that is more sophisticated with improved safety and reliability at a lower cost compared to current systems. An S&A system prevents premature initiation of the weapon while reliably ensuring initiation at the appropriate time. An S&A system uses multiple sensors and devices. In comparison with other weapon S&A systems, a critical aspect of underwater weapon S&A systems is the mechanical interlock system utilizing actuators and mechanical sensors. This paper describes the design, development and fabrication of S&A SLIGA device prototypes and of a SLIGA based S&A system. NSWCIHD worked with members of the HI-MEMS Alliance during design, development and fabrication. Advancements achieved by the HI-MEMS Alliance and SLIGA S&A design issues are discussed. Received: 25 August 1997/Accepted: 10 September 1997     

Sensorless fault tolerant control for induction motors

In this paper, a sensorless fault tolerant controller for induction motors is developed. In the proposed approach, a robust controller based on backstepping strategy is designed in order to compensate for both the load torque disturbance and the rotor resistance variation caused by the broken rotor bars faults. The proposed approach needs neither fault detection and isolation schemes nor controller re-design. Moreover, to avoid the use of speed and flux sensors, a second order sliding mode observer is introduced to estimate the flux and the speed. The observer converges in a finite time and leads to good estimates of the flux and the speed even in the presence of the rotor resistance variation and the load torque disturbance. Since the observer converges in the finite time, the stability of the closed-loop system (controller with observer) is shown in two steps. First, the boundedness of the closed-loop system trajectories before the convergence of the observer is proved. Second, the convergence of the closed-loop system trajectories is proved after the convergence of the observer. To highlight the efficiency and applicability of the proposed control scheme, simulation and experimental results are conducted for a 1.5 kW induction motor.     

Synthesis and characterization of new polyurethanes: influence of monomer composition

Different polyurethanes (PU) were synthesized from polycaprolactone diol, 1.6-hexamethylene diisocyanate and bis(2-hydroxyethyl)terephthalate, using a two- and one-step methods providing regular and random distributions of starting monomers in the polyurethane chains. Even with an identical molar monomer composition, the properties of obtained PU are different depending on the method of synthesis. The chemical structure of PU was characterized by ¹H and ¹³C NMR spectroscopy, as well as by FTIR and UV–Visible spectroscopy. The thermo-mechanical and hydrophilic properties of synthesized PU were also studied demonstrating the influence of aromatic ring in the macromolecular chain.