Synthesis of nanostructured copper hexacyanidoferrate and its application in voltammeteric detection of salbutamol

Nanostructured copper hexacyanidoferrate has been synthesized and characterized using elemental analysis, atomic absorption spectroscopy, thermal and infrared spectral studies. The transmission electron microscopic studies of the synthesized material showed that it consisted of irregular oval and rod shaped particles with a size range 70–100 nm. Nanostructured copper hexacyanidoferrate modified glassy carbon electrode was characterized by cyclic voltammetery and nanostructured copper hexacyanidoferrate–carbon nanotube composite material modified glassy carbon electrode has been used for electrocatalytic oxidation of salbutamol. The electrode modified with composite material was found to reduce the peak potential of oxidation of salbutamol by nearly 90 mV.     

Synthesis,microstructure and optical characterization of zirconium oxide nanostructures

Zirconium oxide (ZrO₂) nanostructures were synthesized by hydrothermal route. Surface morphology analysis depicts the formation of the nanobars and hexagonal-shaped nanodiscs at different synthesis conditions. The structural analysis confirms that the as-synthesized ZrO₂ product is of pure monoclinic phase (m-ZrO₂) with crystallite size of about 25 nm. The product consists of monodispersed nanoparticles of uniform composition, high purity, and crystallinity. The Raman spectra are quantitatively analyzed and the observed peaks are attributed to various vibration modes of the m-ZrO₂. The UV–vis absorption spectrum showed a strong absorption peak at about 292 nm and the estimated optical band gap was around 3.57 eV. Photoluminescence (PL) spectrum of ZrO₂ nanostructure showed a strong and broad emission peak at around 410 nm at room temperature, which can be attributed to the ionized oxygen vacancy in the material.     

Novel Approach for Mobile Based App Development Incorporating MAAF

Wireless Personal Communications - Increased dominance of mobile applications (henceforth, app) over conventional software applications is quite apparent; however, there is a lack of structured...     

Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous–nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles

Multiphase Al₆₅Cu₂₀Ti₁₅ intermetallic alloy matrix composite, dispersed with 10 wt.% of TiO₂ nanoparticles, has been processed by mechanical alloying, followed by spark plasma sintering under pressure in the temperature range of 623–873 K. Differential scanning calorimetry and X-ray diffraction suggest that equilibrium crystalline phases evolve from the amorphous or intermediate crystalline phases. Transmission electron microscopy shows that the composite sintered at 873 K has partially amorphous microstructure, with dispersion of equilibrium, crystalline, intermetallic precipitates of Al₅CuTi₂, Al₃Ti, and Al₂Cu of 25–50 nm size, besides the TiO₂. The composite sintered at 873 K exhibits little porosity, hardness of 5.6 GPa, indentation fracture toughness in the range of 3.1–4.2 MPa√m, and compressive strength of 1.1 GPa. Indentation crack deflection by TiO₂ particle aggregates causes increase in fracture resistance with crack length, and suggests R-curve type behaviour. The study provides guidelines for processing high strength amorphous–nanocrystalline intermetallic composites based on the Al–Cu–Ti ternary system.     

Effect of strontium doping on structural and dielectric behaviour of barium titanate nanoceramics

ABSTRACT

Barium strontium titanate (Ba_(1?x)Sr_xTiO₃ where, x?=?0.0, 0.2, 0.3, 0.4 and 0.5) nanoparticles have been successfully synthesised by sol–gel method and characterised thoroughly. With the increase in Sr concentration (x?>?0.3), the symmetry of the crystal structure changed from tetragonal to cubic phase. The dielectric behaviour of the ceramic nanoparticles was evaluated using impedance analyser with an operating frequency of 1?Hz to 1?MHz. A very high dielectric constant 4915 was obtained for Ba_0.7Sr_0.3TiO₃ at 1?Hz frequency with low dielectric loss of 1.91, which showed very good value than the one previously reported. The density of the material was found to be >98% of theoretical density. Dielectric constants were measured by varying the temperature from 35 to 150°C and the Curie temperatures were also evaluated. The small amount of Sr doping was beneficial for obtaining high dielectric constant material which can be used in various electronic applications.     

Suppression of floatability of pyrite in coal processing by carrier microencapsulation

Carrier microencapsulation, CME, is a technique to form a thin layer of metal oxide or hydroxide on pyrite surface using a water soluble organic carrier combined with metal ions. The present study investigated the effect of CME using a tris-catecholato complex of Si⁴⁺, Si(cat)₃²⁻ on pyrite-coal separation by dynamic bubble pick-up experiments and Hallimond tube flotation experiments using coal, pyrite, and a coal-pyrite mixture. The mineral samples were treated in 0-5 mol m^− 3 Si(cat)₃²⁻ solutions at pH 4-9 at treatment times of 1-24 h. Dynamic bubble pick-up experiments showed that CME treatment converted the pyrite surface from hydrophobic to hydrophilic but did not affect coal's hydrophobic surface. The results of the Hallimond tube flotation experiments of a coal-pyrite mixture at pH 7-9 in the presence of kerosene as a collector showed that pyrite floatability was selectively suppressed after 1 h CME treatment with 0.5 mol^− 3 Si(cat)₃²⁻ while both coal and pyrite were floated without the treatment. This indicates that CME treatment is effective in suppressing pyrite floatability in coal-pyrite flotation.     

Synthesis,characterization and use of polymer‐supported phase transfer catalyst in organic reactions

A polymer‐supported (PS) phase transfer catalyst, polyethylene‐g‐quaternary ammonium salt (PE‐g‐Q_N⁺), is prepared through a three‐step graft copolymerization of maleic anhydride (MAn) onto polyethylene (PE) by photochemical method using 1% benzophenone (Bz) as photosensitizer. Post grafted acid hydrolysis of polyethylene‐g‐maleic anhydride (PE‐g‐MAn) results in the preparation of PE‐g‐succinic acid which on further treatment with tetrabutylammonium bromide (TBAB) under basic conditions in tetrahydrofuran (THF) gives PE‐g‐Q_N⁺. Optimum conditions pertaining to maximum percentage of grafting have been evaluated as a function of concentration of maleic anhydride, amount of photosensitizer, and time of reaction. Maximum percentage of grafting (25%) was obtained using 3.57 mol of MAn and 0.5 mL of 1% Bz in 120 min. The PE and graft copolymers, PE‐g‐MAn, and PE‐g‐Q_N⁺ were characterized by FTIR Spectroscopy and thermogravimetric analysis (TGA). The ionic nature of quaternary ammonium salt, PE‐g‐Q_N⁺ has also been confirmed by conductance measurements. PE‐g‐Q_N⁺ reagent have been used successfully for polymerization, amidation, and esterification reactions. The products obtained were characterized by FTIR and H¹NMR spectral methods. The reagent was reused for the further reactions and it was observed that the polymeric reagent polymerize, amidate, and esterificate the compounds successfully but with little lower product yield. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Cure characteristics,swelling behaviors,and mechanical properties of carbon black filler reinforced EPDM/NBR blend system

The effect of carbon black fillers viz. semireinforcing furnace (SRF), high abrasion furnace (HAF) and intermediate super abrasion furnace (ISAF) carbon blacks on the cure, swelling and mechanical properties of 70/30 EPDM/NBR blend have been investigated. The maximum torque values have been found to be increased with increase in filler loading. Filledsystems have been found to exhibit a reduced solvent uptake tendency compared to the unfilled sample. Blends loaded with ISAF exhibited the lowest toluene uptake among the carbon black filled systems due to the better filler reinforcement. A more uniform morphology has been observed for ISAF‐filled samples compared to the other filler loaded systems. The improvement in the mechanical properties has been observed to be the highest for ISAF‐filled samples followed by HAF and SRF filled systems. This has been attributed to the smaller particle size of ISAF black. The experimental results of mechanical testing have been compared with various theoretical models. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Specificity of Lipoprotein Chaperones for the Characteristic Lipidated Structural Motifs of their Cognate Lipoproteins

Lipoprotein‐binding chaperones mediate intracellular transport of lipidated proteins and determine their proper localisation and functioning. Understanding of the exact structural parameters that determine recognition and transport by different chaperones is of major interest. We have synthesised several lipid‐modified peptides, representative of different lipoprotein classes, and have investigated their binding to the relevant chaperones PDEδ, UNC119a, UNC119b, and galectins‐1 and ‐3. Our results demonstrate that PDEδ recognises S‐isoprenylated C‐terminal peptidic structures but not N‐myristoylated peptides. In contrast, UNC119 proteins bind only mono‐N‐myristoylated, but do not recognise doubly lipidated and S‐isoprenylated peptides at the C terminus. For galectins‐1 and ‐3, neither binding to N‐acylated, nor to C‐terminally prenylated peptides could be determined. These results shed light on the specificity of the chaperone‐mediated cellular lipoprotein transport systems.