锥形有源条半导体光放大器增益和饱和特性分析

以行波半导体光放大器速度方程为基础，采用传输矩阵方法，对锥形结构半导体光放大器的增益和饱和特性进行理论研究。讨论了不同锥形长度，不同结构时的增益和饱和特性差异。理论研究表明，锥形结构能改善半导体光放大器的偏振灵敏度。在同一锥度下，长锥形长度能提高饱和增益，降低偏振度。在进行半导体光放大器有源条结构设计时要综合考虑锥度及锥形长度的影响，以实现结构优化 。     

脱苯工艺的节能改造

焦化厂富油脱苯工艺中，管式炉法较蒸汽法节能。本溪钢铁公司焦化厂产焦１８０万ｔ／ａ的装置，其富油脱苯工艺由蒸汽法改为管式炉法后，每年可节煤７０００ｔ。     

酒精中甲醇,水在NaA沸石上吸附性能的研究

本文测定了酒精中甲醇、水单组分及二元组分的吸附等温线,并用Langmuir方程进行了拟合。在固定床动态吸附研究申测定了酒精中甲醇、水单组分及双组分吸附穿透曲线;着重考察了流速、温度、不同甲醇和水含量对双组分吸附性能的影响。对二个组分的传质机理及置换关系进行了分析探讨。     

宣钢近北庄铁矿露采边坡稳定的结构分析

以宣钢近北庄铁矿露采边坡稳定性研究为例，说细说明了岩体结构分析方法的应用。     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.     

清平磷矿客货两用架空索道设计

系统介绍了四川清平磷矿客货两用架空索道工艺系统方案的确定及线路、上下站等主要构成部分的设备配置、方案优化与主要设备的性能、技术参数，还对系统中的安全设施、事故救护作了说明。     

Electrical characterization of porous BaTiO3 using impedance spectroscopy in humid condition

The humidity response characteristics of La doped BaTiO₃ with different sintered densities and room temperature electrical conductivities were investigated using complex impedance measurement. The samples with low density and high resistivity showed the large and nearly linear sensitivity to the change of humidity. The impedance spectra of samples, when exposed to high humidity, can exhibit microstructure-related features, even though they do not give rise to a noticeable characteristic change when exposed to low humidity. The observed impedance patterns were dependent upon the density, and hence the oxidation kinetics of BaTiO₃.     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

叠后地震剖面的线性化波阻抗反演

本文提出了由井旁道出发逐道进行的叠后地震剖面的线性化波阻抗反演方法。每一道反演采用逐次线性化对波阻抗进行修正，反演的纵向分辨率为一个采样时间间隔，并以合成记录道与实际地震道的相似系数作为迭代收敛准则，已处理的地震道波阻抗作为下一道反演初始值。实际资料处理表明，该方法具有较高的分辨率和运算速度快的优点。     

开发PROFIBUS-DP智能从站

简单介绍了PROFIBUS－DP现场总线，同时讨论了利用89C52单片机和PROFIBUS－DP从站芯片SPC3开发PROFIBUS－DP智能从站的软硬件设计方法。