Effect of a thermal trap on the performance of a solar sand collector

The effects of different parameters—e.g. the thickness of the trap material, the flow rate of the water and the depth of the heat-retrieval plane—on the water temperature have been investigated. A comparison of the present system with a conventional solar sand collector was also made.     

Effect of a booster mirror on the performance of a ‘built-in’ storage solar water heater

In this paper, the performance of a ‘built-in’ storage solar water heater-flat mirror system has been presented. Numerical calculations have been made for a typical cold day (viz. 28 Jan. 1980) at Delhi. The booster mirror causes a minimum temperature rise during the moring and a temperature difference of 7°C excess with respect to the reference panel occurred. The reflectance of the mirror is taken as 0·88.     

A tetracene-based single-electron transistor as a chlorine sensor

An organic molecular single-electron transistor (SET) based on a tetracene quantum dot has been modeled and employed for sensing of chlorine gas, within the framework of density functional theory. The sensing behavior of the SET is estimated through a charge-stability diagram and total energy as a function of gate potential (TE vs. V_g) for varying distances of chlorine from the SET quantum dot, which could be used as an electronic fingerprint for detection. The better sensing ability, high power efficiency and large operational temperature range of tetracene SET, in comparison to conventional sensors, makes it a very powerful candidate for a chlorine gas sensor.     

Study of crystal structure,dielectric, magnetic and magnetoelecrtic properties of xCoFe2O4-(1-x)Na0.5Bi0.5TiO3 composites

Multiferroic composites of spinel ferrite and ferroelectric xCoFe₂O₄ – (1-x)Na_0.5Bi_0.5TiO₃ (with x = 0.10,0.30,0.50) were efficiently prepared by standard solid state reaction mechanism. X-ray diffractometer was used to analyze crystal structure of the prepared composites. The observed XRD patterns of the composites comprise peaks of both the phases i.e. ferrite and ferroelectric, with no sign of secondary peaks. Rietveld refinement of XRD data further confirms the coexistence of these two phases with cubic (Fd3m) and rhombohedral (R3c) symmetry corresponding to ferrite and ferroelectric phase respectively. The 3-dimensional overview of crystal structure of pure CoFe₂O₄ and Na_0.5Bi_0.5TiO₃ and of composite 0.50CoFe₂O₄?0.50Na_0.5Bi_0.5TiO₃ is generated by using refined parameters. The dielectric constant (ε´) and dielectric loss (tanδ) values were recorded as a function of frequency ranging from 100?Hz to 7?MHz and at different temperatures. Both ε´ and tanδ follow dispersion pattern at lower frequencies while show frequency independent behavior at higher frequencies. The magnetic evaluation carried by analyzing M-H hysteresis loop reveals the ferrimagnetic characteristics of these composites. The highest value of magnetic moment is 1.12μ_B observed for composite 0.50CoFe₂O₄ – 0.50Na_0.5Bi_0.5TiO_3. Magnetoelectric (ME) voltage coefficient (α) was also demonstrated to observe the interaction between ferrite and ferroelectric phases. The highest value of α (72.72μV/Oe cm) is obtained for low ferrite composition 0.10CoFe₂O₄ – 0.90Na_0.5Bi_0.5TiO₃, which suggests the dependence of magnetoelectric response on the resistivity of the composites.     

Synthetic,spectroscopic, magnetic,thermal, and antimicrobial approach towards new biocidal coordination polymers

O‐aminophenol was reacted with glutraldehyde to obtain Schiff base, which was then reacted with formaldehyde in slight acidic medium to generate phenolic groups. Now the substituted Schiff base was reacted with the transition metal acetates of Mn(II), Co(II), Ni(II), Cu(II), and Zn(II) to get polymeric metal complexes. Their structures have been elucidated on the basis of elemental analyses, ¹H NMR spectra, ¹³C NMR spectra, magnetic measurements, thermogravimetric analyses, electronic spectra, and infrared spectra. The results are in accordance with an octahedral environment around the central metal ion. The polychelates of Mn(II), Co(II), Ni(II), and Cu(II) are paramagnetic while Zn(II) polychelate was found to be diamagnetic. The synthesized Schiff base acted as a uninegative bidentate ligand and bonding occurs through the hydroxyl oxygen and nitrogen atoms. The thermal behavior of these coordinating polymers was studied by TGA in nitrogen atmosphere up to the temperature range of 800°C. All the synthesized polychelates were also screened for their biocidal activity against Escherichia coli, Staphylococcus aureus, Bacillus subtilis (bacteria), Candida albicans, and Muller species (yeast) by using agar well diffusion method. All the metal polychelates show promising antimicrobial activities. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci 124:3971–3979, 2012     

Estimation of cutting forces and surface roughness for hard turning using neural networks

Metal cutting mechanics is quite complicated and it is very difficult to develop a comprehensive model which involves all cutting parameters affecting machining variables. In this study, machining variables such as cutting forces and surface roughness are measured during turning at different cutting parameters such as approaching angle, speed, feed and depth of cut. The data obtained by experimentation is analyzed and used to construct model using neural networks. The model obtained is then tested with the experimental data and results are indicated.     

Analysis for preliminary design of a class of torsionally coupled buildings with horizontal setbacks

Simplified method of analysis of a special class of torsionally coupled buildings with horizontal setbacks is developed that can be executed with a plane frame analysis by means of a personal computer. Since most buildings may not exactly satisfy all the classification criteria, it is shown that an averaging technique may be used in such cases up to a certain limit. Perturbation analysis is carried out in determining such a limit, and numerical examples are presented to validate this. As a whole, the proposed simplified analysis may be used as a convenient and offhand tool at the preliminary stage of design.