Structure,stability and permeation properties of NaA zeolite membranes for H2O/H2 and CH3OH/H2 separations

NaA zeolite membranes were synthesised in the secondary growth hydrothermal method based on the seeding of the inner surface of a ceramic α-alumina tube. The impacts of crystallisation time and zeolite precursor concentration (in H₂O) were investigated. The structure and stability of the prepared NaA zeolite membranes were also investigated with operating temperatures, times and pressures. The results indicate that the optimal synthesis gel molar composition was 3Na₂O: 2SiO₂: Al₂O₃: 200H₂O. This led to cubic-shaped NaA zeolite which showed good stability. The optimal NaA zeolite membrane had H₂O and CH₃OH fluxes of 2.77 and 0.19 kg/m²h, with H₂O/H₂ and CH₃OH/H₂ separation factors of ∞ and 0.09 at a temperature of 30 °C. The NaA zeolite membrane had high thermal stability, but poor separation performance at high temperature (240 °C). The results suggested that the H₂ permeation flux is significantly influenced by preferential adsorption of vapour in the NaA zeolite membrane.     

Co-immobilization of chitosan and dermatan sulfate from Raja montagui skin on polyethylene terephthalate surfaces: Characterization and antibiofilm activity

In this work, polyethylene terephthalate (PET) was chemically modified by covalent co-immobilization of two separate layers of bioactive polymers composed of chitosan and a new dermatan sulfate isolated from Raja montagui skin. The new materials obtained were characterized by determination of carboxyl groups, ATR-FTIR spectroscopy, drop water contact angle, SEM, and TGA measurements. The different immobilizations modified the surface characteristics; especially when the first layer was dermatan sulfate (PET–DS–Chito) which presented the best surface wettability (71?±?3°). It also reduced the ability of Staphylococcus epidermidis to form biofilm on PET surfaces which could decrease the virulence of vascular prosthesis infections.     

In Vitro Antiprotozoal Activity of Abietane Diterpenoids Isolated from Plectranthus barbatus Andr.

Chromatographic separation of the n-hexane extract of the aerial part of Plectranthus barbatus led to the isolation of five abietane-type diterpenes: dehydroabietane (1); 5,6-didehydro-7-hydroxy-taxodone (2); taxodione (3); 20-deoxocarnosol (4) and 6α,11,12,-trihydroxy-7β,20-epoxy-8,11,13-abietatriene (5). The structures were determined using spectroscopic methods including one- and two-dimensional NMR methods. Compounds (1)–(3) and (5) are isolated here for the first time from the genus Plectranthus. The isolated abietane-type diterpenes tested in vitro for their antiprotozoal activity against erythrocytic schizonts of Plasmodium falciparum, intracellular amastigotes of Leishmania infantum and Trypanosoma cruzi and free trypomastigotes of T. brucei. Cytotoxicity was determined against fibroblast cell line MRC-5. Compound (2) 5,6-didehydro-7-hydroxy-taxodone showed remarkable activity with acceptable selectivity against P. falciparum (IC₅₀ 9.2 μM, SI 10.4) and T. brucei (IC₅₀ 1.9 μM, SI 50.5). Compounds (3)–(5) exhibited non-specific antiprotozoal activity due to high cytotoxicity. Compound (1) dehydroabietane showed no antiprotozoal potential.     

Modern Template Design and Biological Evaluation of Cephradine-loaded Magnesium Calcium Silicate Nanocomposites as an Inhibitor for Nosocomial Bacteria in Biomedical Applications

Silicon - Magnesium calcium silicate nanostructures (MCSNS) loaded with (0.0, 0.6, 0.9, and 1.2 wt%) of Cephradine-drug consisting of mesoporous particles were functionally prepared by sol-gel...     

Impact of bismuth oxide on the structure,optical features and ligand field parameters of borosilicate glasses doped with nickel oxide

Understanding the impact of bismuth cations on the optical properties of borosilicate glass is significant for manipulating borate glass applications. In this paper, the influence of bismuth cations on both structural and optical properties of borosilicate glass doped with NiO was investigated. Different glass samples, containing different amounts of Bi₂O₃ and a constant amount of NiO, were prepared and studied. Infrared (IR) analysis was carried out to study the internal structure within the investigated glass samples. Optical absorption studies were performed to investigate the impact of Bi₂O₃ content on optical properties of the BiBaNiB-glasses. Astonishingly, with Bi₂O₃ addition, an absorption band at 380 nm has appeared. Moreover, this band is overlapped with the Urbach edge; which regularly produced an artificial edge-like feature at ~450 nm. A detailed deconvolution protocol has been implemented for an appropriate understanding of these spectra and unraveling the hidden Urbach edge. Optical band gap energy, linear and nonlinear refractive index for each BiBaNiB sample were calculated. Furthermore, the metallization criterion was calculated to examine the metallic or insulating nature of the BiBaNiB-glasses. The values of the nonlinear third-order susceptibility and nonlinear refractive index were increased with Bi₂O₃ doping. The BiBaNiB-glasses exhibited outstanding stability and optical band gap than the pristine glass sample, which makes it possible for practical applications.     

Glass transition and the rigid amorphous phase in semicrystalline blends of bacterial polyhydroxybutyrate PHB with low molecular mass atactic R, S-PHB-diol

The glass transition and the crystallinity of blends of isotactic bacterial PHB and low molecular mass atactic R, S-PHB-diols was investigated by means of differential scanning calorimetry (DSC), temperature-modulated DSC and dielectric spectroscopy. It was found that (i) T_g of crystallized blends is much lower than T_g of quenched blends, (ii) the semi-crystalline blends can only be described with a three-phase model. From the experimental results the amount of the oligomer component in the mobile amorphous as well as in the rigid amorphous phase was determined. It could be shown that the low molecular mass atactic R, S-PHB-diol is enriched in the mobile amorphous phase of the semi-crystalline blends, but 5-15% oligomer remains, however, in the rigid amorphous phase.     

Traveling wave behavior in a two-phase flow model of tumor growth

Tumor growth which undergoes complex bio-mechanical processes has been a significant focus for mathematical modeling, with particular interest in its dynamic behavior. In this paper, we consider a two-phase flow model for describing the dynamics of tumor growth. The model accounts for aggregate cell movement and mechanical interactions between tumor cells as well as cell proliferation. In suitable limits, by using the dynamical systems theory approach, tumor growth in this mechanical model is shown to occur in the form of traveling waves that can propagate either forward or backward, depending on the values of the parameters. Our results, in particular, the wave profiles of tumor cell density are more realistic and explain those obtained in a recently developed simple, experiment-based, model for studying non-spatial dynamics of tumor cells.     

Using equidistant vector-based hysteresis current regulators in DFIG wind generation systems

This paper proposes a novel equidistant vector-based hysteresis current regulator (VBHCR) in the rotor-side converter (RSC) of DFIG-based wind generation systems. The Γ-form equivalent circuit is used for the machine modelling, with the discrete formulation of the RSC output voltage. The overall vector control scheme is then explored and the control structure of the proposed equidistant VBHCR is presented. When compared to the commonly used PI current regulators, the proposed VBHCR exhibits several advantages such as very fast transient response, simple hardware implementation, satisfactory steady-state performance, and intrinsic robustness to machine parameters variations. Moreover, fixed hysteresis bands are replaced with equidistant bands in order to limit the instantaneous variations of the switching frequency and reduce the maximum switching frequency of the RSC. Detailed simulation studies are carried out for a 1.5 MW DFIG-based wind generator to examine the operation of the proposed current regulator under various operating conditions and demonstrate its superiority over the standard PI current regulator.     

The dependence of ferroelectric and fatigue behaviors of PZT films on annealing conditions

Films of PZT about 0.2 μm thick with the composition PbZr_0.53Ti_0.47O₃ were prepared using the metalloorganic decomposition (MOD) process. The amorphous films produced by pyrolysis at 350°C were annealed at 550, 575, 600 and 650°C for 10 minutes, 1 hour or 4 hours. Films annealed at temperatures below 550°C showed no ferroelectric behavior while others annealed above 650°C showed signs of loss of ferroelectric behavior. Most films demonstrated satisfactory ferroelectric properties such as low switching voltage and high polarization values. Some PZT films also demonstrated fatigue life-time of more than 10⁹ switching reversals. The performance of the films was dependent on the annealing time and temperature. It was found that films with better initial polarization values did not necessarily demonstrate better fatigue behavior. The causes of film degradation as a result of switching based on the pinning of domains at grain boundaries triggered by the migration of pores is discussed.     

The dependence of ferroelectric and fatigue behaviors of PZT films on microstructure and orientation

Microstructure of PbZr_0.53Ti_0.47O₃ films about 0.2 μm thick was studied as a function of annealing temperature and time using TEM and SEM. The films were heat treated in the temperature range 550–650°C for times from 10 minutes to 4 hours. The features characterized were crystal structure of individual PZT particles, PZT grain size and shape, porosity, and grain boundaries. The films were prepared by the metallo-organic decomposition (MOD) process which produced films amorphous to x-rays after pyrolysis. A growth mechanism of PZT particles from the amorphous film is discussed. It was found that at mild annealing conditions (i.e., low temperature and short annealing times), agglomerates of microcrystallites of perovskite, and probably pyrochlore, were formed. As the temperature was increased, the microcrystallites grew into porous submicron perovskite single crystals. With excessive heating, intraparticle pores were found to migrate and became pinned at the grain boundaries, causing widening of boundaries which probably was responsible for the degradation in ferroelectric properties observed in such films. The dependence of ferroelectric and fatigue behaviors on grain orientation was also investigated. It was found that PZT films oriented in the [111] direction demonstrated better fatigue behavior but not necessarily higher polarizations.