Facile preparation of glycine-based mesoporous graphitic carbons with embedded cobalt nanoparticles

Journal of Materials Science - A simple route has been developed for the preparation of mesoporous graphitic carbons with embedded cobalt nanoparticles just using glycine as a nitrogen source,...     

Ultrasensitive Strain Gauges Enabled by Graphene‐Stabilized Silicone Emulsions

Here, an approach is presented to incorporate graphene nanosheets into a silicone rubber matrix via solid stabilization of oil‐in‐water emulsions. These emulsions can be cured into discrete, graphene‐coated silicone balls or continuous, elastomeric films by controlling the degree of coalescence. The electromechanical properties of the resulting composites as a function of interdiffusion time and graphene loading level are characterized. With conductivities approaching 1 S m^?1, elongation to break up to 160%, and a gauge factor of ≈20 in the low‐strain linear regime, small strains such as pulse can be accurately measured. At higher strains, the electromechanical response exhibits a robust exponential dependence, allowing accurate readout for higher strain movements such as chest motion and joint bending. The exponential gauge factor is found to be ≈20, independent of loading level and valid up to 80% strain; this consistent performance is due to the emulsion‐templated microstructure of the composites. The robust behavior may facilitate high‐strain sensing in the nonlinear regime using nanocomposites, where relative resistance change values in excess of 10⁷ enable highly accurate bodily motion monitoring.     

High niobium oxide content in germanate glasses: Thermal,structural, and optical properties

Niobium alkali germanate glasses were synthesized by the melt‐quenching technique. The ternary system (90‐x)GeO₂–xNb₂O₅–10K₂O forms homogeneous glasses with x ranging from 0 to 20 mol%. Samples were investigated by DSC and XRD analysis, FTIR and Raman spectroscopy, and optical absorption. Structural and physical features are discussed in terms of Nb₂O₅ content. The niobium content increase in the glass network strongly modifies the thermal, structural and optical properties of alkali germanate glasses. DSC, Raman and FTIR analysis suggest niobium addition promotes NbO₆ groups insertion close to GeO₄ units of the glass network. XRD analysis also pointed out that samples containing high niobium oxide contents exhibit preferential niobium oxide‐rich phase after crystallization after heat treatment, which is similar to orthorhombic Nb₂O₅. Absorption spectra revealed high transmission range between 400 nm to 6.2 μm, added to a considerably decreased hydroxyl group content as the addition of niobium in the alkali germanate network. The niobium oxide‐rich phase crystallization process was studied and activation energy was determined, as well as nucleation and crystal growth temperatures and time for obtaining transparent glass‐ceramics.     

NATURAL SEWAGE TREATMENT IN THE UK: SELECTION GUIDELINES

The design of septic tanks, constructed wetlands, waste-stabilisation ponds and rock filters is detailed, and their applicability in the UK is discussed. Septic tanks are a suitable primary treatment system for villages with a population of less than 500. Constructed wetlands, which are secondary or tertiary treatment units, have the disadvantage that their plants do not play any significant role in their performance, except for nitrogen removal. Secondary facultative waste-stabilisation ponds, with pre-treatment in septic tanks and post-treatment in rock filters, provide primary, secondary and tertiary treatment and can produce high-quality effluents. The costs of these processes for small rural communities in the UK are compared.     

Performance of the Burwarton Estate Waste Stabilization Ponds

The Burwarton Estate waste stabilization ponds, near Bridgnorth, Shropshire, serve a population of 150. There are three ponds in series: a facultative pond, and two equal maturation ponds, followed by two parallel and alternately used constructed wetland ditches. This paper describes the design of the ponds and reports upon their performance during the first two years of operation.     

Removal of As(V) and Cr(VI) from aqueous solutions using solid waste from leather industry

This study evaluated the feasibility of using a solid waste from the leather industry as an adsorbent for removal of Cr(VI) and As(V) from aqueous media. The adsorbent material was characterized by chemical analyses, infrared spectroscopy, and scanning electronic microscopy (SEM) prior to reaction in order to assess its surface properties. Langmuir and Freundlich equations were used for analyzing the experimental data, which showed a better fit to the Langmuir model, thus suggesting a monolayer adsorption process in the surface of the adsorbent. The high amounts of Cr(VI)-133 mg g(-1) and As(V)-26 mg g(-1) adsorbed demonstrates the great potential for using this solid waste from the leather industry as a low-cost alternative to the traditionally used adsorbent materials.     

Effect of a weight loss intervention on anthropometric measures and metabolic risk factors in pre- versus postmenopausal women

Background

The present study examines changes in body weight, fat mass, metabolic and hormonal parameters in overweight and obese pre- and postmenopausal women who participated in a weight loss intervention.

Methods

Seventy-two subjects were included in the analysis of this single arm study (premenopausal: 22 women, age 43.7 ± 6.4 years, BMI 31.0 ± 2.4 kg/m²; postmenopausal: 50 women, age 58.2 ± 5.1 years, BMI 32.9 ± 3.7 kg/m²). Weight reduction was achieved by the use of a meal replacement and fat-reduced diet. In addition, from week 6 to 24 participants attended a guided exercise program. Body composition was analyzed with the Bod Pod^®. Blood pressures were taken at every visit and blood was collected at baseline and closeout of the study to evaluate lipids, insulin, cortisol and leptin levels.

Results

BMI, fat mass, waist circumference, systolic blood pressure, triglycerides, glucose, leptin and cortisol were higher in the postmenopausal women at baseline. Both groups achieved a substantial and comparable weight loss (pre- vs. postmenopausal: 6.7 ± 4.9 vs 6.7 ± 4.4 kg; n.s.). However, in contrast to premenopausal women, weight loss in postmenopausal women was exclusively due to a reduction of fat mass (-5.3 ± 5.1 vs -6.6 ± 4.1 kg; p < 0.01). In premenopausal women 21% of weight loss was attributed to a reduction in lean body mass. Blood pressure, triglycerides, HDL-cholesterol, and glucose improved significantly only in postmenopausal women whereas total cholesterol and LDL-cholesterol were lowered significantly in both groups.

Conclusion

Both groups showed comparable weight loss and in postmenopausal women weight loss was associated with a pronounced improvement in metabolic risk factors thereby reducing the prevalence of metabolic syndrome.