Evaluation of the Impact of Esterases and Lipases from the Circulatory System against Substrates of Different Lipophilicity

Esterases and lipases can process amphiphilic esters used as drugs and prodrugs and impact their pharmacokinetics and biodistribution. These hydrolases can also process ester components of drug delivery systems (DDSs), thus triggering DDSs destabilization with premature cargo release. In this study we tested and optimized assays that allowed us to quantify and compare individual esterase contributions to the degradation of substrates of increased lipophilicity and to establish limitations in terms of substrates that can be processed by a specific esterase/lipase. We have studied the impact of carbonic anhydrase; phospholipases A1, A2, C and D; lipoprotein lipase; and standard lipase on the hydrolysis of 4-nitrophenyl acetate, 4-nitrophenyl palmitate, DGGR and POPC liposomes, drawing structure–property relationships. We found that the enzymatic activity of these proteins was highly dependent on the lipophilicity of the substrate used to assess them, as expected. The activity observed for classical esterases was diminished when lipophilicity of the substrate increased, while activity observed for lipases generally increased, following the interfacial activation model, and was highly dependent on the type of lipase and its structure. The assays developed allowed us to determine the most sensitive methods for quantifying enzymatic activity against substrates of particular types and lipophilicity.     

Characterization of Porous Carbonaceous Sorbents Using High Pressure CO2 Adsorption Data

In this paper we present adsorption isotherms of carbon dioxide on five different activated carbons from CHEMVIRON CARBON Belgium (Centaur HSV, BPL 410, F30-470, WS 42, Reactivated) and on a carbon molecular sieve from BERGBAU FORSCHUNG Gmbh (CMS II). The temperature is 303 K and the pressure ranges from 100 kPa up to 4000 kPa. Such conditions correspond to relative pressures ranging from 0.01 to 0.5. We also provide, for the same six sorbents, the nitrogen isotherms at 77 K (pressure: 0.001 to 100 kPa, relative pressure: 10^-5 to 1). A theoretical treatment based on the Dubinin-Radushkevich and Stoeckli concept is presented and applied to the experimental results in order to obtain the micropore size distribution function (considered as Gaussian) of each sorbent. Using the CO₂ data, it is possible to point out important structural differences between the six carbons. The theoretical treatment provides micropore size distribution functions in agreement with what is physically expected. Using N₂ data, the structural differences are not so well marked. As a consequence, the structural parameters provided by the theoretical treatment are not reliable: except for the total micropore volume, they fluctuate strongly when changing the relative pressure domain of the used data.     

New applications for LTPS array technology including lab‐on‐chip and MEMS actuators

Abstract— The use of low‐temperature poly‐Si technology for new applications beyond displays is presented. These applications include lab‐on‐chip, MEMS actuators, and sensors. As a key example, the use of high‐voltage poly‐Si TFTs for rapid heating and temperature control, as is required for DNA amplification within lab‐on‐chip, is described in detail. Other examples given include MEMS ink‐jet printer heads and the formation of photosensors and impedance sensors for optical and electronic input, which can be used not only in displays and lab‐on‐chip, but also for new applications such as fingerprint sensing and particle counting.     

Adsorption of mercaptopropionic acid onto Au(1 1 1): Part II. Effect on copper electrodeposition

Copper deposition in the presence of an organic additive (3-mercaptopropionic acid, MPA) was studied by cyclic voltammetry and in situ scanning tunneling microscopy (STM) and the results are compared to those for additive-free solutions. It is shown that underpotential deposition (upd) of copper onto a fully MPA-covered electrode produces a defect-rich substrate, but the defects are blocked by the dense organic film for bulk deposition, resulting in a low number of nuclei. A grain-refining effect of MPA, however, was found, when Cu deposition was initiated shortly after addition of MPA to the solution, i.e., for a low-coverage MPA adlayer.     

A reactive molecular dynamics model of thermal decomposition in polymers: I. Poly(methyl methacrylate)

The theory and implementation of reactive molecular dynamics (RMD) are presented. The capabilities of RMD and its potential use as a tool for investigating the mechanisms of thermal transformations in materials are demonstrated by presenting results from simulations of the thermal degradation of poly(methyl methacrylate) (PMMA). While it is known that depolymerization must be the major decomposition channel for PMMA, there are unanswered questions about the nature of the initiation reaction and the relative reactivities of the tertiary and primary radicals formed in the degradation process. The results of our RMD simulations, performed directly in the condensed phase, are consistent with available experimental information. They also provide new insights into the mechanism of the thermally induced conversion of this polymer into its constituent monomers.     

Estimation of the exposure of the French population to the BSE agent: comparison of the 1980-95 consumption of beef products containing mechanically recovered meat in France and the UK,by birth cohort and gender

Assuming that human exposure to BSE was through beef mechanically recovered meat (MRM) consumed as burgers and other meat products, we estimated the French consumption of different food items containing beef MRM, and compared these consumptions for French and British populations. To estimate consumption of meat products containing bovine MRM, we used dietary data from national individual and household food surveys conducted between 1980 and 1995. After reconciliation of consumption data between the available surveys and calendar year adjustments, we simulated consumption of one-thousandth of the French population. Consumption was estimated by birth cohort and gender, and for the periods 1980-89 and 1990-95 separately. Data showed that burgers (including manufactured minced meat) represented around 75-80% of the individual consumption of meat products containing MRM, and that consumption of burgers increased by 40% over the 1980-95 period. In all age groups, consumption was higher in males than in females. In both genders, the 1940-69 birth cohort had the highest mean consumption of burgers and other beef products containing MRM. Similar findings have been reported for the UK population. Estimated consumption of bovine MRM per calendar year increased markedly over the study period, concomitantly with an increase of bovine carcasses imported from the UK. Comparison of the 1980-1995 pattern of bovine MRM consumption in the UK and France indicated thatthis consumption peaked later in France than in the UK. This difference might result in different temporal pattern of vCJD incidence.     

Toughening of polylactide by melt blending with linear low‐density polyethylene

Melt blending of polylactide and linear low‐density polyethylene (LLDPE) was performed in an effort to toughen polylactide. In addition, two model polylactide‐polyethylene (PLLA‐PE) block copolymers were investigated as compatibilizers. The LLDPE particle size and the impact resistance of binary and ternary blends were measured to determine the extent of compatibilization. For the amorphous polylactide (PLA), toughening was achieved only when a PLLA‐PE block copolymer was used as a compatibilizer. For the semicrystalline polylactide (PLLA), toughening was achieved in the absence of block copolymer. To decrease the variability in the impact resistance of the PLLA/LLDPE binary blend, as little as 0.5 wt % of a PLLA–;PE block copolymer was effective. The differences that were seen between the PLA and PLLA binary blends were investigated with adhesion testing. The semicrystalline PLLA did show significantly better adhesion to the LLDPE. We propose that tacticty effects on the entanglement molecular weight or miscibility of polylactide allow for the improved adhesion between the PLLA and LLDPE. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3757–3768, 2003     

A 4-Arm PEG-Thiodepsipeptide Precursor Enables Gelatinase-Promoted Hydrogel Formation

In situ hydrogelation of injectable precursors upon biological stimulus is relevant to generate hydrogels under mild conditions and, potentially, at a biological side of interest. Here, it is shown that hydrolytic enzymes can be used to initiate the formation of covalent hydrogel networks, realizing a cleavage-leading-to-gelation strategy. For this purpose, a two-component system is used, consisting of a 4-arm polyethylene glycol-thiodepsipeptide conjugate, PEG4TDP_o containing the matrix metalloproteinases MMP-2- and MMP-9-cleavable Ac-Pro-Leu-Gly#SLeu-Leu-Gly- thiodepsipeptide sequence releasing a thiol upon hydrolysis, and a maleimide functionalized 4-armed PEG (PEG4MAL). PEG4TDP_o is synthesized in a PEG-functionalization protocol involving convergent and divergent synthetic steps without the need for rigorous purification procedures. In a fluorometric assay, it is shown that the construct is in fact cleaved by both investigated MMPs. PEG4TDP_o in the presence of 10 wt.% PEG4MAL formed hydrogels upon addition of MMP-2 or -9 with average gelation times of 28 and 40 min, respectively, as is investigated by rheology. The much faster gelation times compared to the enzyme-free system showed the specific input of the enzymatic reactions. The MMP-assisted activation and crosslinking strategy can potentially become useful by targeting tissues showing an increased expression of MMPs, such as cancers, or to detect MMPs.     

Interlaboratory study on lipid oxidation during accelerated storage trials with rapeseed and sunflower oil analyzed by conjugated dienes as primary oxidation products

Accelerated storage tests are frequently used to assess the oxidative stability of foods and related systems due to its reproducibility. Various methods and experimental conditions are used to measure lipid oxidation. Differences between laboratories make it necessary to determine the repeatability and reproducibility of oxidation tests performed under the same conditions. The objective of the present interlaboratory study was to evaluate the outcome of a storage test for two different bulk oils, sunflower oil (SFO) and rapeseed oil (RSO), during a period of 9 weeks at 20°C, 30°C, 40°C, and 60°C. Sixteen laboratories were provided with bottled oils and conducted the storage tests according to a detailed protocol. Lipid oxidation was monitored by the formation of conjugated dienes (CD) and the activation energy (E_a) was determined for comparative purposes and statistically evaluated. An increase in CD formation was observed for both oils when the storage temperature was increased in all laboratories. The E_a,1 ranged from 47.9 to 73.3 kJ mol⁻¹ in RSO and from 27.8 to 62.6 kJ mol⁻¹ in SFO, with average values of 58.2 and 46.8 kJ mol⁻¹, respectively. The reproducibility coefficients were 10.9% and 18.2% for RSO and SFO, respectively. Practical applications: In order to compare results on oxidative stability of foods derived from different studies, the reproducibility of storage tests and methods employed to evaluate the oxidation level should be considered. This study provides fundamental data on the reproducibility of lipid oxidation under accelerated storage conditions and defines important parameters to be considered for the conduction of experiments.     

Aerobic Granular Sludge: Perspectives for Excess Sludge Management and Resource Recovery

Aerobic granular sludge (AGS) technology is gaining increasing interest globally. However, several aspects are still challenging its installation, as the integration into existing municipal wastewater treatment plants. The operation of AGS units in continuous flow mode could facilitate that integration; yet has only been experienced at lab and pilot scales. Further, handling of excess granular sludge constitutes a prominent challenge. Even that, adopting effective strategies for its management holds promising contributions to the circular economy by fostering the reuse and recovery of valuable resources. The recovery of phosphorus and alginate-like polymers holds significant commercial potential worldwide, with broad applications in agriculture, food, pharmaceuticals, and biotechnology.