Synthesis,characterization and evaluation of phosphorylated resins in the removal of Pb<Superscript>2+</Superscript> from aqueous solutions

Phosphinic-derivative poly(styrene-co-divinylbenzene)-based on PS–DVB copolymers with different porosity degrees have been prepared by aromatic electrophilic substitution reaction using PCl₃/AlCl₃ followed by base-promoted hydrolysis. The phosphorylation reaction was analyzed by infra-red spectroscopy (FTIR), scanning electron microscopy (SEM), and thermogravimetry (TG/DTG). In addition, the phosphorous content of the phosphorylated copolymers was determined by spectrophotometry using the method based on sodium molybdate reactant so that the extension of that modification could be assessed. The performance of the phosphorylated resins in the extraction of Pb²⁺ from aqueous solutions in a batch system was also evaluated. The Pb²⁺ content was determined by atomic absorption spectrometry (AAS). These materials presented excellent extraction capacity under the contact time of 30 min and pH 6.     

Functionalized-radiolabeled hydroxyapatite/tenorite nanoparticles as theranostic agents for osteosarcoma

Hydroxyapatite (HA) nanoparticles (NPs) doped with different radioisotopes for use as theranostic systems play an important role in scientific research nowadays due to their ability to simultaneously act in the treatment and diagnosis of various types of cancers. In this work, we describe the synthesis and characterization of a hydroxyapatite/tenorite nanocomposite functionalized with folic acid, representing a nanotheranostic material with potential for application as an agent in positron emission tomography imaging systems and to act specifically in the treatment and diagnosis of osteosarcoma. ⁶⁴Cu and ³²P were produced by nuclear activation in the TRIGA reactor at CDTN. The obtained samples were characterized by XRD with Rietveld refinement, XAFS, SEM, BET, TGA, FTIR, CHN, ICP-AES, XPS and gamma spectroscopy. We investigated how CuO grows in HA NPs, the stability of the interactions between CuO and HA constituents and the interactions between folic acid and the surface of the HA NPs. The results indicate the formation of a second phase (tenorite) besides hydroxyapatite, and that the interactions between the two phases are stable, resulting in a nanocomposite. Furthermore, the activation of ⁶⁴Cu and ³²P inside the HA matrix, through the exposition to a neutron flux, produces a theranostic material of interest for biological tests.     

Online Identification of Horizontal Two-Phase Flow Regimes Through Gabor Transform and Neural Network Processing

The fundamental objective of this work is the development of a specialist system capable of diagnosing different configurations of horizontal two-phase flow regimes. It is important to emphasize that this knowledge is of capital importance to the efficient operation of facilities for the manipulation and transportation of multiphase fluids, and it represents one of the most important challenges in petrochemical and thermonuclear industries today. The working principle of the proposed methodology is based on the signals acquired by a rapid response pressure gradient sensor and their decomposition into Gabor coefficients, followed by processing through a previously trained artificial neural network. The implementation is accomplished in such a way that the diagnosis operation is performed online, from the acquisition of the signal to its post-processing. An experimental campaign was conducted at the facilities of the Thermal and Fluids Engineering Laboratory (NETeF) at the University of São Paulo in order to validate the proposed methodology. Experimental pressure gradient signals were obtained for all main horizontal air-water flow regimes (stratified smooth, stratified wavy, intermittent, annular, and bubbly) produced in a 12 m long test section with an internal diameter of 30 mm. Results show that the percentage of correct flow regime diagnosis in steady-state conditions is practically 100%, provided the detection level is adequately set.     

Independent power producer parallel operation modeling in transient network simulations for interconnected distributed generation studies

The main task in this paper is to present a performance analysis of a distribution network in the presence of an independent power producer (IP) synchronous generator with its speed governor and voltage regulator modeled using TACS – Transient Analysis of Control Systems, for distributed generation studies. Regulators were implemented through their transfer functions in the S domain. However, since ATP-EMTP (Electromagnetic Transient Program) works in the time domain, a discretization is necessary to return the TACS output to time domain. It must be highlighted that this generator is driven by a steam turbine, and the whole system with regulators and the equivalent of the power authority system at the common coupling point (CCP) are modeled in the “ATP-EMTP – Alternative Transients Program”.     

Selective Sharing of Load Current Components Among Parallel Power Electronic Interfaces in Three-phase Four-wire Stand-alone Microgrid

This paper investigates selective sharing of load current components among the parallel operation of distributed generators (DGs) in three-phase four-wire stand-alone microgrids. The proposed control method is based on master-slave operation of DGs, and the goal of selective sharing of load current components is to have DGs located in close proximity of the load operating in slave mode, in order to inject their available energy and also compensate the non-active load current components, while the distant DGs might operate in master mode to share the remaining load autonomously. Droop control is employed due to impracticality of communication at remote nodes, and resistive line impedance compensation is adopted to decouple active and reactive power controllers and ensure proper active power sharing among master DGs, irrespective of the mitigation of non-active current components by the slave inverters. The sharing factors for each current component are determined by a higher level control. The Conservative Power Theory (CPT) decompositions provide decoupled power and current references for the inverters, resulting in a selective sharing strategy. The principles supporting the developed control strategy are discussed, and the effectiveness of the control is demonstrated through computational simulations using PSIM software.     

Adaptive Boolean Logic Using Ferroelectrics Capacitors as Basic Units of Artificial Neurons and Its Implementation in FPGA

In this work we propose the implementation of boolean logic through artificial neurons with Ferroelectric Capacitor (FeCapacitor) as its basic unit on a reconfigurable hardware platform. Two neurons were implemented: the Perceptron and the Spiking Neuron model. Both neurons use the phenomenon of the hysteresis loop as an activation function and were embedded on a Field Gate Programmable Gate Array (FPGA) hardware platform. The implementations were carried out by Simulink models and hardware synthesizable blocks from DSP Builder software and the results are shown in the form of the models and the boolean functions implemented by them.     

Effect of Pluronic F127 on the 3D pore morphology of poly(N-isopropylacrylamide-co-acrylic acid) hydrogels and their nitric oxide release from S-nitrosoglutathione

Changing the pore morphology of hydrogels can be an effective strategy to modulate their drug release profiles. Herein, Pluronic F127 was used to change the three-dimensional pore morphology of crosslinked poly(N-isopropylacrylamide-co-acrylic acid) (P[NIPAm-co-AAc]) hydrogels. F127 reduced the pore diameters from 20 ± 4 to 2.9 ± 0.4 μm and from 11 ± 1 to 1.4 ± 0.4 μm in hydrogels synthesized at 8 and 30°C, respectively. Small-angle X-ray scattering indicates that the segregation of the F127 during the polymerization process induces F127 phase transitions from unimers (at 8°C) or cubic-packed micelles (at 30°C) to a lamellar structure. P(NIPAm-co-AAc) hydrogels charged with S-nitrosoglutathione (GSNO), released nitric oxide (NO) spontaneously during hydration. The decrease in the pore diameter led to a twofold to threefold increase in the rate of water absorption and a fourfold to sixfold increase in the rate of NO release of the hydrogels. F127 can be used to change the pore morphology of P(NIPAm-co-AAc) hydrogels, with concomitant changes in their rate of hydration and NO release from GSNO, opening a new perspective for their use in topical NO delivery.     

The Expression of Lipoprotein Receptors Is Increased in the Infarcted Area After Myocardial Infarction Induced in Rats With Cardiac Dysfunction

Left ventricular (LV) remodeling after myocardial infarction constitutes the structural basis for ventricular dysfunction and heart failure. The characterization underlying the expression of lipoprotein receptors in cardiac dysfunction is scarcely explored. The aim of this study was to analyze the status of lipoprotein receptors on the infarcted and noninfarcted areas of LV and to verify whether nanoparticles that mimic the lipid structure of low‐density lipoprotein (LDL) and have the ability to bind to LDL receptors (LDE) are taken up more avidly by the noninfarcted LV. 13 male Wistar rats with left coronary artery ligation (myocardial infarction [MI]) and 12 animals with SHAM operation (SHAM) were used in this study. 6 weeks after the procedure, the quantification of low‐density lipoprotein receptor (LDLR), LDL receptor‐related protein 1 (LRP1), scavenger receptor‐class B type I (SR‐BI) lipoprotein receptors, and PCNA proliferation marker, and tissue uptake of radioactively labeled LDE were performed. Immunohistochemistry and Western blot analysis showed that LDLR, LRP1, SR‐BI, and PCNA, expression in infarcted area of MI was remarkably higher than SHAM and noninfarcted subendocardial (SEN) and interstitial (INT) areas. In addition, in SEN noninfarcted area of MI, the presence of LDLR was about threefold higher than in SHAM SEN and INT noninfarcted areas. The LDE uptake of noninfarcted LV of MI group was about 30% greater than that of SHAM group. In conclusion, these findings regarding the status of lipoprotein receptors after MI induction could help to establish mechanisms on myocardial repairing. In conclusion, infarcted rats with LV dysfunction showed increased expression of lipoprotein receptors mainly in the infarcted area.     

Catalytic Evaluation of CuO/[Si]MCM‐41 in Fenton‐like Reactions

CuO/[Si]MCM‐41 catalysts with various Si/Cu molar ratios were prepared and characterized by X‐ray diffraction, nitrogen physisorption, temperature‐programmed reduction by H₂, and UV‐vis and Raman spectroscopy. The effects of copper loading and pH on their activity in the decolorization of methyl orange were studied in a heterogeneous Fenton‐like process. With decreasing Si/Cu ratio, dye decolorization increased from 18 to 75 % at pH 3. CuO/[Si]MCM‐41 catalysts showed 75, 50, and 40 % conversion of methyl orange at pH 3, 5, and 7, respectively. This is a significant improvement to Fenton‐like reactions involving copper, and thus CuO/[Si]MCM‐41 catalysts are quite promising for pollutant degradation.