Influence of drying conditions on colour,betacyanin content and antioxidant capacities in dried red-fleshed dragon fruit (Hylocereus polyrhizus)

In this study, drying of red-fleshed dragon fruit at different temperatures (40, 50, 60, 70 and 80 °C) and air velocities (1.0 and 1.5 m s⁻¹) was conducted under the specific humidity of 25 g H₂O kg⁻¹ dry air. The results showed that drying at higher temperatures resulted in shorter drying times. However, temperature and air velocity did not significantly affect the total betacyanin contents and antioxidant capacities in dried products. Seven betacyanins identified by LC-MS were betanin, isobetanin, phyllocactin, isophyllocactin, betanidin 5 –O-(6′O-3-hydroxybutyryl)-β-glucoside, isobetanidin 5 –O-(6′O-3-hydroxybutyryl)-β-glucoside and decarboxylated phyllocactin. In addition, the temperature increased the isomerisation of betacyanins. The most preferable condition for preserving the colour and betacyanin contents of red-fleshed dragon fruit was the drying at a temperature of 80 °C and air velocity of 1.5 m s⁻¹ since it could shorten the drying time and give a bright red colour to the dried product as well as it had no significant impact on the betacyanins.     

Four practical and conceptual assessment issues that evaluators should address in capital case mental retardation evaluations.

What unique assessment issues do evaluators face when conducting mental retardation evaluations in capital cases? This article describes 4 assessment issues and reports how 20 evaluators in 1 state have approached them: (a) What methods are appropriate for evaluating adaptive functioning in this context? (b) Should information about criminal behavior be used as evidence of adaptive functioning? (c) Should correctional officers serve as informants regarding adaptive behavior? and (d) How should the Flynn effect influence the interpretation of intelligence test scores? Implications for practice are that practitioners should expect to be asked about the relation between criminal behavior and adaptive functioning, must think carefully about the validity of tests of adaptive functioning for inmates, and must be knowledgeable about the current state of Flynn effect research. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Yttrium incorporation in Cr2AlC: On the metastable phase formation and decomposition of (Cr,Y)2AlC MAX phase thin films

Herein we report on the synthesis of a metastable (Cr,Y)₂AlC MAX phase solid solution by co-sputtering from a composite Cr–Al–C and elemental Y target, at room temperature, followed by annealing. However, direct high-temperature synthesis resulted in multiphase films, as evidenced by X-ray diffraction analyses, room-temperature depositions, followed by annealing to 760°C led to the formation of phase pure (Cr,Y)₂AlC by diffusion. Higher annealing temperatures caused a decomposition of the metastable phase into Cr₂AlC, Y₅Al₃, and Cr-carbides. In contrast to pure Cr₂AlC, the Y-containing phase crystallizes directly in the MAX phase structure instead of first forming a disordered solid solution. Furthermore, the crystallization temperature was shown to be Y-content dependent and was increased by ∼200°C for 5 at.% Y compared to Cr₂AlC. Calculations predicting the metastable phase formation of (Cr,Y)₂AlC and its decomposition are in excellent agreement with the experimental findings.     

Diagenetic transformation of dissolved organic nitrogen compounds under contrasting sedimentary redox conditions in the Black Sea

Remineralization of organic matter in reactive marine sediments releases nutrients and dissolved organic matter (DOM) into the ocean. Here we focused on the molecular-level characterization of DOM by high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sediment pore waters and bottom waters from contrasting redox regimes in the northern Black Sea with particular emphasis on nitrogen-bearing compounds to derive an improved understanding of the molecular transformations involved in nitrogen release. The number of nitrogen-bearing molecules is generally higher in pore waters than in bottom waters. This suggests intensified degradation of nitrogen-bearing precursor molecules such as proteins in anoxic sediments: No significant difference was observed between sediments deposited under oxic vs anoxic conditions (average O/C ratios of 0.55) suggesting that the different organic matter quality induced by contrasting redox conditions does not impact protein diagenesis in the subseafloor. Compounds in the pore waters were on average larger, less oxygenated, and had a higher number of unsaturations. Applying a mathematical model, we could show that the assemblages of nitrogen-bearing molecular formulas are potential products of proteinaceous material that was transformed by the following reactions: (a) hydrolysis and deamination, both reducing the molecular size and nitrogen content of the products and intermediates; (b) oxidation and hydration of the intermediates; and (c) methylation and dehydration.     

The distribution of lithium intercalated in V2O5 thin films studied by XPS and ToF-SIMS

The distribution of lithium in V₂O₅/V lower oxide duplex thin films prepared by thermal oxidation of V metal was analysed by XPS and ToF-SIMS after intercalation at 2.8 V versus Li/Li⁺ and de-intercalation at 3.8 V following cycling between 3.8 and 2.8 V in 1 M LiClO₄-PC. XPS analysis of the intercalated thin film evidenced a partial reduction (43 at.% V⁴⁺) of the V₂O₅ surface, the modification of its electronic structure and the presence of Li, consistent with the formation of the δ-Li_xV₂O₅ (0.9 ≤ x ≤ 1) phase. The Li in-depth distribution measured by ToF-SIMS shows a maximum in the outer layer of V₂O₅, but Li is also found at the oxide film/metal substrate interface indicating its diffusion across the inner layer of V lower oxides. The analyses performed after de-intercalation on the samples cycled 12, 120 and 300 times reveal the effect of aging on the trapping of lithium. A significant reduction (17-22 at.% V⁴⁺) of the V₂O₅ surface was measured after 300 cycles. The Li in-depth distribution shows a maximum at the interface between the outer layer of V₂O₅ and the inner layer of lower oxides. Aging favours the accumulation of lithium at this interface with a resulting enlarged distribution enriching the sub-surface of the outer layer of V₂O₅ and the inner layer of lower oxides after 300 cycles. Lithium is also found, but in smaller quantities, at the oxide film/metal substrate interface. Measurements performed in the non-electrochemically treated surface areas of the de-intercalated samples revealed the same type of modifications, evidencing the diffusion of lithium along the interfaces where it is trapped.     

Experimental investigation of an industrial scale black liquor gasifier. 1. The effect of reactor operation parameters on product gas composition

A novel technology to mitigate the climate changes and improve energy security is Pressurized Entrained flow High Temperature Black Liquor Gasification (PEHT-BLG) in combination with an efficient fuel synthesis using the resulting syngas. In order to optimise the technology for use in a pulp and paper mill based biorefinery, it is of great importance to understand how the operational parameters of the gasifier affect the product gas composition. The present paper is based on experiments where gas samples were withdrawn from the hot part of a 3 MW entrained flow pressurized black liquor gasifier of semi industrial scale using a high temperature gas sampling system. Specifically, the influence of process conditions on product gas composition (CO₂, CO, H₂, CH₄, H₂S, and COS) were examined by systematically varying the operational parameters: system pressure, oxygen to black liquor equivalence ratio, black liquor flow rate to pressure ratio and black liquor pre-heat temperature. Due to the harsh environment inside the gasification reactor, gas sampling is a challenging task. However, for the purpose of the current study, a specially designed high temperature gas sampling system was successfully developed and used. The results, obtained from two separate experimental campaigns, show that all of the investigated operational parameters have a significant influence on the product gas composition and present valuable information about to the process characteristics.