Propagation Path Loss and Materials Insertion Loss in Indoor Environment at WiMAX Band of 3.3 to 3.6?GHz

The purpose of this study is to characterize the indoor channel for IEEE 802.16 (WiMAX) at 3.3?C3.6?GHz frequency. This work presents a channel model based on measurements conducted in commonly found scenarios in buildings. These scenarios include closed corridor, wide corridor and semi open corridor. Path loss equations are determined using log-distance path loss model and a Rayleigh multipath induced fading, Normal multipath induced fading or a combination of both. A numerical analysis of measurements in each scenario was conducted and the study determined equations that describe path loss for each scenario. Propagation loss is given for 300?MHz bandwidth. This work also represents the insertion loss of different materials and the obstruction loss due the existence of human beings between the transmitting antenna and the receiving one.     

Capacity Optimization in TDMA Ad-Hoc Networks

Many scheduling techniques have been developed to solve the problem of sharing the common channel to multiple stations. TDMA has been increasingly used as a scheduling technique in ad-hoc networks. The current trend for QoS capable applications led to the deployment of numerous routing schemes that use TDMA. These schemes try to solve the problem of distributing the available slots among the wireless nodes and at the same time, to find paths within the network that fulfill some QoS related limitations, such as end-to-end delay. The exact way the slots are distributed among the transmitting nodes has an impact on the end-to-end delay and other performance parameters of the network, such as capacity. Therefore, the efficiency of the scheduling algorithms is closely related to the network topologies. In this paper, we propose two new end-to-end TDMA scheduling algorithms that try to enhance the network capacity by increasing the number of concurrent connections established in the network, without causing additional end-to-end delay. We study the efficiency of the proposed algorithms, when applied on various random topologies, and compare them in terms of end-to-end delay and network capacity.     

The influence of hydrogen and nitrogen on the formation of Si nanoclusters embedded in sub-stoichiometric silicon oxide layers

This work reports the study concerning the influence of the preparation conditions on the structure of silicon rich oxide (SRO) deposited by PECVD method by which the structural properties of the film are strictly related. In particular we investigated the role of reactant gases N₂O and SiH₄ on the total Si concentration, Si excess concentration, Si clustered concentration and size of nanoclusters formed by high annealing temperature. We payed particular attention on the role of the hydrogen and nitrogen during the Si agglomeration.The presence of hydrogen atoms on the as-deposited specimen, confirmed by the Si–H bonds peak on the FTIR analysis, has been directly correlated to the silicon excess concentration in the layer. The silicon, oxygen and nitrogen atomic density has been calculated from RBS analysis. These information were coupled to the ones obtained using methodology based on electron energy loss spectroscopy combined with energy filtered images, which allowed us to quantify the clustered silicon concentration in annealed sub-stoichiometric silicon oxide layers (SiO_x). We have verified that the nitrogen dissolved in the layer inhibits the Si excess clustering so that the efficiency of silicon agglomeration process decreases as the nitrogen content increases.     

Path Representation in Circuit Netlists Using Linear-Sized ZDDs with Optimal Variable Ordering

The efficient representation and manipulation of a large number of paths in a Directed Acyclic Graph (DAG) requires the usage of special data structures that may become of exponential size with respect to the size of the graph. Several methodologies targeting Electronic Design Automation problems such as timing analysis, physical design, verification and testing involve path representation and necessary manipulation. Previous works proposed an encoding using Zero-suppressed Binary Decision Diagrams (ZDDs), which has been shown experimentally to cope well when representing structural or logical paths in VLSI circuits. However, it is well known that the ordering of the variables in a ZDD highly affects its size and, therefore, the efficiency of the methodologies utilizing these data structures. In this work, we show that using a reverse topological order for the ZDD variables bounds the number of nodes in the ZDD representing structural paths to the number of edges in the DAG considered, hence, making the ZDD size linear to the DAG’s size. This result, supported here both theoretically and experimentally, is very important as it can render methodologies with questionable scalability applicable to larger industrial designs. We demonstrate the applicability of the proposed variable ordering in one such methodology which utilizes ZDDs to grade the Path Delay Fault coverage of a given test set.     

Segmentation of retinal blood vessels by combining the detection of centerlines and morphological reconstruction

This paper presents an automated method for the segmentation of the vascular network in retinal images. The algorithm starts with the extraction of vessel centerlines, which are used as guidelines for the subsequent vessel filling phase. For this purpose, the outputs of four directional differential operators are processed in order to select connected sets of candidate points to be further classified as centerline pixels using vessel derived features. The final segmentation is obtained using an iterative region growing method that integrates the contents of several binary images resulting from vessel width dependent morphological filters. Our approach was tested on two publicly available databases and its results are compared with recently published methods. The results demonstrate that our algorithm outperforms other solutions and approximates the average accuracy of a human observer without a significant degradation of sensitivity and specificity.     

Design and realization of transparent solar modules based on luminescent solar concentrators integrating nanostructured photonic crystals

Herein, we present a prototype of a photovoltaic module that combines a luminescent solar concentrator integrating one‐dimensional photonic crystals and in‐plane CuInGaSe₂ (CIGS) solar cells. Highly uniform and wide‐area nanostructured multilayers with photonic crystal properties were deposited by a cost‐efficient and scalable liquid processing amenable to large‐scale fabrication. Their role is to both maximize light absorption in the targeted spectral range, determined by the fluorophore employed, and minimize losses caused by emission at angles within the escape cone of the planar concentrator. From a structural perspective, the porous nature of the layers facilitates the integration with the thermoplastic polymers typically used to encapsulate and seal these modules. Judicious design of the module geometry, as well as of the optical properties of the dielectric mirrors employed, allows optimizing light guiding and hence photovoltaic performance while preserving a great deal of transparency. Optimized in‐plane designs like the one herein proposed are of relevance for building integrated photovoltaics, as ease of fabrication, long‐term stability and improved performance are simultaneously achieved. © 2015 The Authors. Progress in Photovoltaics: Research and Applications published by John Wiley & Sons Ltd.     

Physical–chemical characterization of titanium dioxide layers sensitized with the natural dyes carmine and morin

The titanium dioxide (TiO₂)-based layers sensitized with carmine and morin dyes were prepared using commercial P25 TiO₂ powder as starting material. The influence of natural colorants as natural photosensitizers on TiO₂ photoactivity was discussed from the point of view of UV–VIS and Fourier transform infra-red (FTIR) spectroscopy, fluorescence analysis, microscopy, X-ray diffraction and nitrogen adsorption-desorption isotherms determination. A shift to visible region of the sensitized TiO₂ layers is observed. The decrease of sensitized TiO₂ band gap improves its photoactivity in the visible domain. The fluorescence quenching of TiO₂ sensitized with carmine is correlated with better adsorption of the dye molecules to the TiO₂ surface and with electron injection process, also. The FTIR absorption spectra of samples proved the presence of dye molecules on TiO₂ nanoparticles surface. Thus, the investigated sensitized TiO₂-based layers could have potential in photoelectrochemical applications.     

A methodology to benchmark flexible payload architectures in a megaconstellation use case

This paper proposes a methodology to benchmark satellite payload architectures and find the optimal trade‐offs between high flexibility and low complexity. High flexibility would enable the satellite to adapt to various distributions of user terminals on the ground and fulfill the data rate demand of these users. Besides, low complexity is required to keep satellite networks competitive in the context of emerging 5G networks. To estimate the flexibility of a payload, an indicator to characterize the non‐uniformity of user distributions is proposed. Each benchmarked payload may be characterized by a graph relating the throughput to this parameter further denoted . The payload provides the same throughput trends for different scenarios of user distributions with the same parameter. As a consequence, the average capacity of the system may be estimated by (a) calculating the probability distribution of over the orbit and (b) integrating the throughput based on this payload response. It thus results in a straightforward way for benchmarking payloads directly on an estimation of the averaged capacity, accounting for the user distribution over the earth. A simulation platform has been developed to characterize the payload throughput including the implementation of a resource allocation algorithm that accounts for constraints of various payloads. Using this definition and the developed tool, we benchmark a bent‐pipe architecture, a beam hopping architecture and a hybrid beam‐steering architecture for a LEO megaconstellation use case. The methodology showcases the interest for investigating different payload architectures depending on realistic traffic scenario analysis.     

Integration of InGaP/GaAs/Ge triple‐junction solar cells on deeply patterned silicon substrates

We report preliminary results on InGaP/InGaAs/Ge photovoltaic cells for concentrated terrestrial applications, monolithically integrated on engineered Si(001) substrates. Cells deposited on planar Ge/Si(001) epilayers, grown by plasma‐enhanced chemical vapor deposition, provide good efficiency and spectral response, despite the small thickness of the Ge epilayers and a threading dislocation density as large as 10⁷/cm². The presence of microcracks generated by the thermal misfit is compensated by a dense collection grid that avoids insulated areas. In order to avoid the excessive shadowing introduced by the use of a dense grid, the crack density needs to be lowered. Here, we show that deep patterning of the Si substrate in blocks can be an option, provided that a continuous Ge layer is formed at the top, and it is suitably planarized before the metalorganic chemical vapor deposition. The crack density is effectively decreased, despite that the efficiency is also lowered with respect to unpatterned devices. The reasons of this efficiency reduction are discussed, and a strategy for improvement is proposed and explored. Full morphological analysis of the coalesced Ge blocks is reported, and the final devices are tested under concentrated AM1.5D spectrum. Copyright © 2016 John Wiley & Sons, Ltd.