Carbon Aerogels as Electrode Material in Supercapacitors

Due to their large specific surface area and their high electrical conductivity carbon aerogels are promising materials for electrodes in electrochemical double-layer capacitors (supercapacitor). The carbon aerogels were made via pyrolysis of resorcinol formaldehyde aerogels. The latter were prepared by supercritical and subcritical drying as well. The important findings of our investigation were, that the highest capacities of 46 F/cm³ were measured for samples with a density of about 800 kg/m³ pyrolyzed at 800°C. Also it was shown that RF-gels with molar resorcinol/catalyst ratios 1000 or higher can be dried subcritically without cracking or significant shrinkage. Carbon aerogels derived from these RF-aerogels have a small mesopore surface area, however an especially large micropore area. They provide electrical capacities which are most suitable for their use in supercapacitors.     

Hot slag resistance of refractories

Conclusions It is proposed to test refractories for hot-slag resistance by which is meant the complex property typifying the wear resistance of refractories with the single-sided action of high temperature and slags and subsequent sharp cooling.A laboratory gas-oxygen furnace design was developed for testing the slag resistance with one-sided heating with the aim of forming zones in the specimens.The spalling resistance of zonal magnesite-chromite and periclase-spinel goods was determined.According to the slag resistance and operating spalling resistance the periclase-spinel refractories are better than the spalling-resistant magnesite-chromite.     

Effect of the use of mineral filler on the properties of concrete

Engineers of the concrete technology are increasingly concerned with the material passing through a sieve of the size under 0.149 mm. Materials called very fine aggregate or mineral filler may affect the performance of concrete in an either positive or a negative way. Discussions on aggregate containing very fine material are vitally important. Washing the aggregate residue has been the sole way to solve this matter to date. This is mainly based on the debatable opinion that materials of this kind are regarded as clay material. The goal of the study was to determine how the content of mineral filler might affect properties of concrete. Two types of aggregates with different amounts of cement and mineral filler were used. Basically, mineral filler replaced sand. The effect of applying different amounts of mineral filler on concrete was then determined. The addition of 7-10% of mineral filler to fine aggregate (0-2 mm) was found to considerably improve the properties of concrete.     

Über das Spreiten von Lipiden auf der Haut

On the Spreading of Lipids on the Skin The spontaneous spreading of liquid lipids on human skin is an important property for the use value of such products in cosmetic and pharmaceutical preparations. A comparative evaluation procedure based on an impression method is described, by means of which it is possible to determine the spreading rates in a reproducible manner. The standardized spreading values of a number of lipids are discussed in comparison with their chemical structure and physico-chemical data such as viscosity and surface tension. None of these data series correlates entirely with the spreading rates of all the lipids tested. However, it is possible to assess relative spreading rates within similarly structured groups of compounds.     

Characterization of poly(diethoxyphosphazene) by size exclusion chromatography and viscometry

Two samples of poly(diethoxyphosphazene) (PDEP) having very different molecular weights have been studied by viscometry and size exclusion chromatography in THF solution. The results obtained, together with light scattering data of these samples, allow the calculation of the Mark-Houwink constants a=0.65 and K=2.5 10^-4 in THF at 25°C. The method of calculation employed takes into account the great polydispersity of the samples. The characteristic ratio of the unperturbed dimensions was also calculated giving C_n = r²_o/n² 18, a value slightly higher than those previously reported for poly(dihexoxyphosphazene), C_n13 and poly (dichlorophosphazene), C_n13.5.     

An anomaly in the necking behavior of polyethylene

Tensile creep measurements at constant load on nonoriented polyethylene have shown a marked transition at a certain stress level from a neck formation followed by instantaneous fracture to the formation of a neck which resists fracture for a considerable time. The transition, which shifts towards shorter time and higher nominal stress with increasing molecular weight, has been studied for 16 polyethylenes of different molecular weights, degrees of branching and crystalline structures. The marked. transition has only been observed for high density polyethylene of high molecular weight. Deformation measurements show a more distinct necking for the high density than for the medium density polyethylenes. This is consistent with current molecular deformation theories. A hypothesis for the transition is proposed based on the distinctness of the neck process in the high density polyethylene and the large difference in strength between the spherulitic structure and the fibrillar structure. The dependence of the transition on molecular weight is expected since the number of tic chains incrcrtses with increasing molecular weight.     

Kinetic investigations in heterogeneous reaction systems by wavefront analysis

In this paper the previously introduced wavefront analysis is extended to heterogeneous reaction systems, which consist of several reaction steps. It is shown how three mainly informations obtained at the wavefront, namely the damping of the wavefront, the time-gradients at the wavefront and the propagation velocity of the wavefront, can be used for kinetic investigations of a reaction step under consideration.     

Modelling the effects of human papillomavirus in cervical cells

Worldwide, cervical cancer is the second most common cancer in women, after breast cancer. The prevalence of this malignant disease is estimated at 1.4 million cases worldwide, causing about 290,000 deaths and 500,000 new cases per year, of which 80% correspond to women living in developing countries. In this work we propose a family of ordered models for basal cells of the cervix corresponding to different stages ranging from normal cells to the formation of precancerous lesions. We analyse the first member of the family analytically and for the second member we developed a non-standard numerical method in order to extract some biological information.     

Influence of Amorphous Grain Boundary Phases on the Superplastic Behavior of 3-mol%-Yttria-Stabilized Tetragonal Zirconia Polycrystals (3Y-TZP)

Amorphous silicate grain boundary phases of varying chemistry and amounts were added to 3Y-TZP in order to determine their influence on the superplastic behavior between 1200° and 1300°C and on the room-temperature mechanical properties. Strain rate enhancement at high temperatures was observed in 3Y-TZP containing a glassy grain boundary phase, even with as little as 0.1 wt% glass. Strain rate enhancement was greatest in 3Y-TZP with 5 wt% glass, but the room-temperature hardness, elastic modulus, and fracture toughness were degraded. The addition of glassy grain boundary phases did not significantly affect the stress exponent of 3Y-TZP, but did lower the activation energy for superplastic flow. Strain rate enhancement was highest in samples containing the grain boundary phase with the highest solubility for Y₂O₃ and ZrO₂, but the strain rate did not scale inversely with the viscosity of the silicate phases. Grain boundary sliding accommodated by diffusional creep controlled by an interface reaction is proposed as the mechanism for superplastic deformation in 3Y-TZP with and without glassy grain boundary phases.