Description of the microflora of sourdoughs by culture-dependent and culture-independent methods

Four types of sourdoughs (L, C, B, Q) from artisanal bakeries in Northern Italy were studied using culture-dependent and culture-independent methods. In all samples, the yeast numbers ranged from 160 to 10⁷ cfu/g, and the numbers of lactic acid bacteria (LAB) ranged from 10³ to 10⁹ cfu/g. The isolated LAB were sequenced, and a similarity was noted between two samples (C, Q), both in terms of the species that were present and in terms of the percentage of isolates. In these two samples, Lactobacillus plantarum accounted for 73% and 89% of the bacteria, and Lactobacillus brevis represented 27% and 11%. In the third sample (B), however, the dominant LAB isolate was Lb. brevis (73%), while Lb. plantarum accounted for only 27%. The fourth sourdough (L) was completely different from the others. In this sample, the most prominent isolate was Weisella cibaria (56%), followed by Lb. plantarum (36%) and Pediococcus pentosaceus (8%). In three out of four samples (L, C and Q), all of the yeasts isolated were identified as Saccharomyces cerevisiae, yet only Candida humilis (90%) and Candida milleri (10%) were isolated in the fourth sample (B). The microbial ecology of the sourdoughs was also examined with direct methods. The results obtained by culture-independent methods and DGGE analysis underline a partial correspondence between the DNA and RNA analysis. These results demonstrate the importance of using a combined analytical approach to explore the microbial communities of sourdoughs.     

Moulds and ochratoxin A on surfaces of artisanal and industrial dry sausages

The use of moulds as a seasoning for sausage can have both desirable and undesirable consequences. The desirable consequences are the creation of a successful product that appeals to consumers. The undesirable consequences are due to the growth of undesirable moulds that produce highly toxic secondary metabolites referred to as mycotoxins. The aim of the paper was to investigate the presence of moulds producing ochratoxin A (OTA) on the surface of sausages from northern Italy. A total of 757 mould strains were isolated from sausage casings. The most frequently identified species were Penicillium nalgiovense, Penicillium oxalicum, Eurotium amstelodami, Penicillium olsonii, Penicillium chrysogenum, Penicillium verrucosum, Penicillium viridicatum, and Eupenicillium crustaceum. Aspergillus ochraceus was detected in only one production lot. Approximately 45% of these samples were positive for the presence of OTA. On the casings of the investigated sausages, the lowest and highest OTA values were 3 and 18 μg/kg, respectively. The OTA concentration was reduced to below the limit of detection (LOD) by brushing and washing the sausages prior to sale. From these data it appears that the presence of OTA on the surface of sausage (on the casings) is not indicative of any health risk for human consumption of sausage, since OTA was not identified inside the dry meat.     

Molecular methods to evaluate biodiversity in Bacillus cereus and Bacillus thuringiensis strains from different origins

The spore-forming genus Bacillus includes species of industrial, clinical and environmental significance. The possibility of differentiating between Bacillus cereus and Bacillus thuringiensis, toxin producers associated with illness, is a real need in monitoring potentially contaminated foods to understand the real distribution of B. cereus/B. thuringiensis in different outbreak cases. As the use of DNA comparison obtains clearer results than classical microbiological methods in distinguishing B. cereus from B. thuringiensis in this work PCR-TTGE (Temporal Temperature Gradient gel Electrophoresis), rep-PCR and RAPD-PCR methods have been compared to assess the intra- and inter-specific variability of B. cereus and B. thuringiensis. 80 strains of B. cereus and B. thuringiensis isolated from food, patients and pesticides were analyzed using a gyrB gene DNA sequence in TTGE; primer M13 in the RAPD-PCR and primers REP1DT and REP2DT in the rep-PCR methods. A widespread distribution of the electrophoretic profiles was obtained either for B. cereus or for B. thuringiensis using TTGE. rep-PCR and RAPD-PCR were not always able to group strains from the same origin or belonging to the same species. The fingerprints obtained with the rep- and RAPD-PCR methods confirm the high intraspecific variability present in B. cereus and B. thuringiensis indicating the difficulty to discriminate between these two species in outbreak cases.     

Longitudinal Dissemination of Salmonella enterica Clonal Groups through the Slaughter Process of Salmonella-Positive Pig Batches

This study was conducted to assess the dissemination of Salmonella clonal groups in slaughterhouses that received batches of Salmonella -positive pigs and used different routine processing procedures. Eight serial sampling sessions were conducted in three slaughterhouses (A, B, and C). Blood was collected randomly (n = 25) from each batch of pigs and processed for serology. Carcasses (n = 12) were identified and sampled after dehairing, after singeing, after evisceration, and before chilling. A section of cecum also was collected. Salmonella isolates were submitted to pulsed-field gel electrophoresis. The overall seroprevalence of Salmonella was 80.6% (316 of 392 samples), and cecal contents were positive for Salmonella in 23.8% (26 of 109) of the pigs sampled. Carcasses after dehairing had a significantly higher prevalence of Salmonella (P = 0.004) and the highest Salmonella levels (median ～ 0.26 log CFU/300 cm(2)). The singeing step significantly affected the Salmonella status of the carcasses (P = 0.001); however, the efficacy of singeing differed among slaughterhouses. In the prechilling step, 14.7% (16 of 109) of the carcasses were positive for Salmonella. Salmonella pulsotypes found on the prechill carcasses were also found in the lairage, in the cecal contents, and on carcasses after dehairing, suggesting that the main source of contamination was the slaughter process before singeing. Slaughterhouse C was the most likely (odds ration [OR] ～ 6.51) to have pigs carrying Salmonella in the gut, and slaughterhouse B was the most likely (OR ～ 14.66) to have contaminated carcasses at the prechilling step. These findings indicate that the procedures adopted in slaughterhouse B contributed to the spread of Salmonella strains. In contrast, in slaughterhouse C the Salmonella strains carried by the pigs or found in the lairage were not recovered from prechilled carcasses, validating the effectiveness of the slaughterhouse interventions. These results indicate that an effective slaughter process can help decrease the number of Salmonella-positive carcasses in slaughterhouses that receive Salmonella-positive pig batches.     

Catalase-positive cocci in fermented sausage: Variability due to different pork breeds, breeding systems and sausage production technology

The aim of this study was to compare the ecology of catalase-positive cocci (CPC) present in traditional fermented sausages produced using different breeds of pork, each of which was raised in two different environments and processed using two different technologies. Semi-quantitative molecular methods were used to determine bacterial identities. Almost all fermentations were characterised by a significant increase in CPC during the first few days of fermentation, reaching values of 10⁵-10⁶ cfu g⁻¹ within 3 days. Staphylococcus xylosus and Staphylococcus equorum species, which were detected over the course of fermentation, were found to be the predominant population in all the monitored fermentation. Staphylococcus haemolyticus, Staphylococcus lentus, Micrococcus luteus, Macrococcus caseolyticus and Staphylococcus succinus were also present, but their concentrations were found to vary under the different experimental conditions. Using cluster analysis, we concluded that a plant-specific CPC ecology existed. In addition, the breed of pork used for production was found to influence the presence of some CPC species. However, from this study, it was not possible to reach the same conclusion regarding the breeding system used.     

Properties of extruded expandable breadfruit products

It is vital to process breadfruit in order to develop new value-added products with improved sensory and physicochemical characteristics. In this research, dried breadfruit was extruded with a twin screw extruder and effects of barrel temperature, moisture content, feeding rate and screw speed on product physicochemical properties and process energy consumption were studied. Quadratic models were obtained to predict the product quality under various processing conditions. The best range of crispness of the extrudate was from 2.0 to 3.5N/s, hardness from 60 to 75 N and bulk density from 0.3 to 0.38 g/cm³. Corresponding operating conditions of feeding rate, temperature, screw speed and moisture content to obtain best results of crispness, hardness and bulk density were 16 kg/h, 130 °C, 160 rpm, 22 g/100 g; 22 kg/h, 150 °C, 160rpm, 22 g/kg; 19 kg/h, 140 °C, 115 rpm, 19 g/100 g; and 25 kg/h, 140 °C, 145 rpm, 19 g/100 g, respectively. The linear term of screw speed significantly effected all indexes (p < 0.001), especially water absorption and solubility indexes, sectional expansion ratio, bulk density, color and specific mechanical energy. The interaction term of feed rate and temperature, and square term of screw speed had no significant influences (p ≥ 0.1). The findings were useful for developing and optimizing extruded or value-added co products of breadfruit.     

The influence of drying air temperature on the physical properties of dried and rehydrated eggplant

Drying processes generally cause volume and surface change of foodstuffs. Information on the porous structure and the mechanical properties of dried food products is needed for determining food quality, process design and estimating properties such as density and moisture diffusivity.In this work we investigated the structural changes induced in eggplant by convective air drying at four different temperatures (40, 50, 60 and 70 °C) and their effect on the subsequent rehydration process. Drying and rehydration kinetic curves were also measured.The changes in physical properties, such as porosity, pore-size distribution and bulk density were determined by Hg porosimetry, scanning electron microscopy and optical microscopy while their effect on the textural characteristics by dynamometric measurements.As expected, the increase of the drying air temperature causes shorter drying times. The drying temperature influences strongly the microstructure of dried samples: the porosity increases with the air temperature, but the structure is better preserved at intermediate temperature (60 °C) as confirmed by the lower firmness values with respect to the other dehydrated samples (40, 50 and 70 °C). In these latter, the longer drying time and the higher temperature, respectively, causes the development of a wrinkled structure. In particular, at 70 °C the structure of dehydrated samples appears totally broken with a consequent faster water uptake during rehydration.     

Preparation and characterization of blends of high density polyethylene and poly(ethylene‐co‐1‐octene) elastomer

Mechanical, thermal, and morphological properties of blends of high density polyethylene and poly(ethylene‐co‐1‐octene) (PEO) were evaluated. The blends were prepared in a single screw extruder at 230°C and 50 rpm with volume fraction of elastomer varying in the range from 0.05 to 0.8. Factors such as chemical similarity and melt viscosity favor the interdiffusion process of phases, resulting in better interfacial adhesion. A synergistic effect on the strength at break and elongation at break for a particular range of blend composition was observed. Blends with a volume fraction of PEO higher than 5% presented a super tough behavior at room temperature. Thermal analysis showed that there is a certain degree of interaction between high density polyethylene and PEO. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 1991–1995, 2001     

Effect of a nonionic surfactant on biodegradation of slowly desorbing PAHs in contaminated soils

The influence of the nonionic surfactant Brij 35 on biodegradation of slowly desorbing polycyclic aromatic hydrocarbons (PAHs) was determined in contaminated soils. We employed a soil originated from a creosote-polluted site, and a manufactured gas plant soil that had been treated by bioremediation. The two soils differed in their total content in five indicator 3-, 4-, and 5-ring PAHs (2923 mg kg(-1) and 183 mg kg(-1) in the creosote-polluted and bioremediated soils, respectively) but had a similar content (140 mg kg(-1) vs 156 mg kg(-1)) of slowly desorbing PAHs. The PAHs present in the bioremediated soil were highly recalcitrant. The surfactant at a concentration above its critical micelle concentration enhanced the biodegradation of slowly desorbing PAHs in suspensions of both soils, but it was especially efficient with bioremediated soil, causing a 62% loss of the total PAH content. An inhibition of biodegradation was observed with the high-molecular-weight PAHs pyrene and benzo[a]pyrene in the untreated soil, possibly due to competition effects with other solubilized PAHs present at relatively high concentrations. We suggest that nonionic surfactants may improve bioremediation performance with soils that have previously undergone extensive bioremediation to enrich for a slowly desorbing profile.