Biodiesel influence on tribology characteristics of a diesel engine

This paper deals with the influence of biodiesel on some tribology characteristics of a bus diesel engine with a mechanically controlled fuel injection system. The tests have been performed on a fully equipped engine test bed, on a fuel injection test bed and on a discharge coefficient testing device. The tested fuel was neat biodiesel produced from rapeseed. Attention was focused on the biodiesel influence on the pump plunger surface roughness, on the carbon deposits in the combustion chamber, on the injector and in the injector nozzle hole. The pump plunger surface was analyzed by experimentally determined roughness parameters and by a microscope. The carbon deposits at fuel injector and in the combustion chamber were examined using endoscopic inspection. The deposits in the injector nozzle were investigated indirectly by measuring the nozzle discharge coefficient. Numerical simulation has been performed in order to estimate the influence of the discharge coefficient variation on the computed injection characteristics. The obtained results indicate that biodiesel usage may even improve the pump plunger lubrication conditions. Furthermore, the carbon deposits in the combustion chambers did not vary significantly in quantity but they were noticeably redistributed. Finally, it was found out that the variation of the nozzle discharge coefficient has to be taken into account only if high accuracy of numerical simulation is desired.     

Characteristics of Retinitis Pigmentosa Associated with ADGRV1 and Comparison with USH2A in Patients from a Multicentric Usher Syndrome Study Treatrush

In contrast to USH2A, variants in ADGRV1 are a minor cause of Usher syndrome type 2, and the associated phenotype is less known. The purpose of the study was to characterize the retinal phenotype of 18 ADGRV1 patients (9 male, 9 female; median age 52 years) and compare it with that of 204 USH2A patients (111 male, 93 female; median age 43 years) in terms of nyctalopia onset, best corrected visual acuity (BCVA), fundus autofluorescence (FAF), and optical coherence tomography (OCT) features. There was no statistical difference in the median age at onset (30 and 18 years; Mann–Whitney U test, p = 0.13); the mean age when 50% of the patients reached legal blindness (≥1.0 log MAR) based on visual acuity (64 years for both groups; log-rank, p = 0.3); the risk of developing advanced retinal degeneration (patch or atrophy) with age (multiple logistic regression, p = 0.8); or the frequency of cystoid macular edema (31% vs. 26%, Fisher’s exact test, p = 0.4). ADGRV1 and USH2A retinopathy were indistinguishable in all major functional and structural characteristics, suggesting that the loss of function of the corresponding proteins produces similar effects in the retina. The results are important for counseling ADGRV1 patients, who represent the minor patient subgroup.     

Synthesis of novel DC-SIGN ligands with an alpha-fucosylamide anchor

The dendritic cell-specific intercellular adhesion molecule (ICAM) 3-grabbing nonintegrin (DC-SIGN) is a C-type lectin that appears to perform several different functions. Besides mediating adhesion between dendritic cells and T lymphocytes, DC-SIGN recognizes several pathogens some of which, including HIV, appear to exploit it to invade host organisms. The intriguing diversity of the roles attributed to DC-SIGN and their therapeutic implications have stimulated the search for new ligands that could be used as biological probes and possibly as lead compounds for drug development. The natural ligands of DC-SIGN consist of mannose oligosaccharides or fucose-containing Lewis-type determinants. Using the known 3D structure of the Lewis-x trisaccharide, we have identified some monovalent alpha-fucosylamides that bind to DC-SIGN with inhibitory constants 0.4-0.5 mM, as determined by SPR, and have characterized their interaction with the protein by STD NMR spectroscopy. This work establishes for the first time alpha-fucosylamides as functional mimics of chemically and enzymatically unstable alpha-fucosides and describes interesting candidates for the preparation of multivalent systems able to block the receptor DC-SIGN with high affinity and with potential biomedical applications.     

Hidden logistic potentials of working systems

Nowadays, the companies operate in a turbulent environment caused by various effects of global market, quick expansion of new products and production processes, fastidious customers and increased competition.In these circumstances only those companies are successful which can respond to market changes as fast as possible—i.e. they have the shortest response time regarding fulfilment of customer requirements (short delivery time and reliable delivery in addition to price and quality).Consequently, a reduction of mean inventory, range and lead time of working systems in the company is an ever increasing strategy that ensures an increase of growth and profit of the company.The article shows how the tools for modelling the flow of orders through working systems can be used in order to discover the hidden logistic potentials of working systems in a company.Presented are the results of finding hidden logistic potentials of working systems in the tool-production department of "ETI d.d." company from Izlake, Slovenia.     

Fabrication of diamond nanowires for quantum information processing applications

We present a design and a top-down fabrication method for realizing diamond nanowires in both bulk single crystal and polycrystalline diamond. Numerical modeling was used to study coupling between a Nitrogen Vacancy (NV) color center and optical modes of a nanowire, and to find an optimal range of nanowire diameters that allows for large collection efficiency of emitted photons. Inductively coupled plasma (ICP) reactive ion etching (RIE) with oxygen is used to fabricate the nanowires. Drop-casted nanoparticles (including Au, SiO₂ and Al₂O₃) as well as electron beam lithography defined spin-on glass and evaporated Au have been used as an etch mask. We found Al₂O₃ nanoparticles to be the most etch resistant. At the same time FOx e-beam resist (spin-on glass) proved to be a suitable etch mask for fabrication of ordered arrays of diamond nanowires. We were able to obtain nanowires with near-vertical sidewalls in both polycrystalline and single crystal diamond. The heights and diameters of the polycrystalline nanowires presented in this paper are ≈ 1 μm and 120–340 nm, respectively, having a 200 nm/min etch rate. In the case of single crystal diamond (types Ib and IIa) nanowires the height and diameter for different diamonds and masks shown in this paper were 1–2.4 μm and 120–490 nm with etch rates between 190 and 240 nm/min.     

Liquid Chromatography–Light Scattering Detector–Mass Spectrometric Analysis of Digested Oxidized Rapeseed Oil

Rapeseed oil was oxidized chemically and thermally to produce two distinct oxidized oils. These oils, along with unoxidized oils, were subjected to an artificial digestion model to simulate the digestive processes in humans. Lipid digestion involves lipases that break down the intact triacylglycerol (TAG) molecules first to diacylglycerols, and eventually to sn-2-monoacylglycerols (MAG) and free fatty acids. A high performance liquid chromatography-evaporative light scattering detector-electrospray ionization-mass spectrometric (HPLC–ELSD–ESI–MS) method was developed to monitor the lipolysis and the presence of oxidized lipids. The HPLC–ELSD–ESI–MS analysis enabled the separation and detection of nearly all the lipid species present in the sample after TAG hydrolysis. The HPLC–MS analyses of digestion products revealed that oxidized triacylglycerols are hydrolyzed by the digestive enzymes in a manner similar to that of native, unoxidized molecules. Significant amounts of sn-1(3)-MAG were found in all the samples after lipolysis, however, more of these were found in unoxidized rapeseed oil samples than in the oxidized oils. Several oxidized molecules were identified with the aid of synthesized oxylipids. This novel method is scalable to small-scale preparative fractionation of oxidized lipid molecules from a complex digestion sample. Also, the fingerprint-like, diagnostic, MS profiles of oxidized oils, reference compounds, and digestion products may be a great aid in comprehensive analysis of lipid oxidation and lipolysis.     

Taylor Bubble Study of the Influence of Fluid Dynamics on Yield and Selectivity in Fast Gas-Liquid Reactions

A consecutive competitive gas-liquid reaction is investigated using a Taylor bubble setup regarding the influence of fluid mixing in the bubble wake on yield and selectivity. The concentration fields behind a Taylor bubble are visualized and measured quantitatively with a novel time-resolved absorption imaging technique based on Beer Lamberts law and an integral selectivity is derived. In addition, the calculation of the local selectivity, often used in numerical approaches, is discussed and the existing experimental limits for its derivation are pointed out. Finally, an increase in selectivity of a competitive consecutive reaction for enhanced mixing is experimentally confirmed.     

A Potent N-(piperidin-4-yl)-1H-pyrrole-2-carboxamide Inhibitor of Adenylyl Cyclase of G. lamblia: Biological Evaluation and Molecular Modelling Studies

In this work, we report a derivative of N-(piperidin-4-yl)-1H-pyrrole-2-carboxamide as a new inhibitor for adenylyl cyclase of Giardia lamblia which was obtained from a study using structural data of the nucleotidyl cyclase 1 (gNC1) of this parasite. For such a study, we developed a model for this specific enzyme by using homology techniques, which is the first model reported for gNC1 of G. lamblia. Our studies show that the new inhibitor has a competitive mechanism of action against this enzyme. 2-Hydroxyestradiol was used as the reference compound for comparative studies. Results in this work are important from two points of view. on the one hand, an experimentally corroborated model for gNC1 of G. lamblia obtained by molecular modelling is presented; on the other hand, the new inhibitor obtained is an undoubtedly excellent starting structure for the development of new metabolic inhibitors for G. lamblia.     

Encapsulation of Synthesized Plant Growth Regulator Based on Copper(II) Complex in Chitosan/Alginate Microcapsules

A new copper complex, trans-diaqua-trans-bis [1-hydroxy-1,2-di (methoxycarbonyl) ethenato] copper (abbreviation Cu(II) complex), was synthesized and its plant growth regulation properties were investigated. The results show a sharp dependence of growth regulation activity of the Cu(II) complex on the type of culture and its concentration. New plant growth regulator accelerated the development of the corn root system (the increase in both length and weight) but showed a smaller effect on the development of the wheat and barley root systems. Stimulation of corn growth decreased with increasing Cu(II) complex concentration from 0.0001% to 0.01% (inhibition at high concentrations—0.01%). The development of corn stems was also accelerated but to a lesser extent. Chitosan-coated calcium alginate microcapsules suitable for delivery of Cu(II) complex to plants were prepared and characterized. Analysis of the FTIR spectrum showed that complex molecular interactions between functional groups of microcapsule constituents include mainly electrostatic interactions and hydrogen bonds. Microcapsules surface exhibits a soft granular surface structure with substructures consisting of abundant smaller particles with reduced surface roughness. Release profile analysis showed Fickian diffusion is the rate-controlling mechanism of Cu(II) complex releasing. The obtained results give new insights into the complexity of the interaction between the Cu(II) complex and microcapsule formulation constituents, which can be of great help in accelerating product development for the application in agriculture     

Transmittance Measurements in Non-alternating Magnetic Field as Reliable Method for Determining of Heating Properties of Phosphate and Phosphonate Coated Fe3O4 Magnetic Nanoparticles

Different phosphates and phosphonates have shown excellent coating ability toward magnetic nanoparticles, improving their stability and biocompatibility which enables their biomedical application. The magnetic hyperthermia efficiency of phosphates (IDP and IHP) and phosphonates (MDP and HEDP) coated Fe₃O₄ magnetic nanoparticles (MNPs) were evaluated in an alternating magnetic field. For a deeper understanding of hyperthermia, the behavior of investigated MNPs in the non-alternating magnetic field was monitored by measuring the transparency of the sample. To investigate their theranostic potential coated Fe₃O₄-MNPs were radiolabeled with radionuclide ¹⁷⁷Lu. Phosphate coated MNPs were radiolabeled in high radiolabeling yield (>?99%) while phosphonate coated MNPs reached maximum radiolabeling yield of 78%. Regardless lower radiolabeling yield both radiolabeled phosphonate MNPs may be further purified reaching radiochemical purity of more than 95%. In vitro stabile radiolabeled nanoparticles in saline and HSA were obtained. The high heating ability of phosphates and phosphonates coated MNPs as sine qua non for efficient in vivo hyperthermia treatment and satisfactory radiolabeling yield justifies their further research in order to develop new theranostic agents.