Calculation of secondary cable losses and ampacity in the presenceof harmonics

A simplified procedure for computing ohmic losses in secondary distribution cable systems by extending the Neher-McGrath model for 60 Hz losses is presented. Specifically, simplified formulae for evaluating ohmic losses due to harmonics are given. These results are subsequently used to compute the cable ampacity or the derating factor due to harmonics. The overall method is simple to follow and can be performed with a calculator. A typical example is given     

Crystal structure of synthesized CuGaTe2 determined by X-ray powder diffraction using the Rietveld method

A full profile X-ray powder diffraction structure refinement has been carried out on a sample of synthesized CuGaTe₂ using graphite monocromatized CuK step-scan data and a profile shape of the Pearson VII type. The most satisfactory convergence was achieved at R _p = 0.0666, R _wp = 0.0884, R _B = 0.0106 and R _F = 0.0102. The derived structural parameters at 26.5°C are: a = 0.602348(7), c = 1.193979(2) nm and x(Te) = 0.256(6). The ratio between lattice parameters, = c/2a = 0.9911 (0), differs from 1.0, indicating a tetragonal distortion, and non-ideal anion displacements, x(Te)1/4, is manifested by the existence of bond alternation of Cu-Te and Ga-Te with interatomic distances of 0.262(5) and 0.2578(5) nm, respectively. These results show a light tetrahedral deformation produced by four-fold tetrahedra of the copper cation in the CuGaTe₂ chalcopyrite-type structure.     

Corrosion and wear properties of multipurpose coatings deposited by ion-beam-assisted deposition

Electrochemical measurements and wear tests were performed on aluminium and aluminium alloy coatings containing magnesium for uniform and local pitting corrosion protection of low carbon steel substrates. Final hard chromium nitride and aluminium nitride layers were deposited at the surface of the protective films in order to lower friction and wear. The results show that wear and corrosion protection can be improved by use of bifunctional multilayers. The coatings for multipurpose application were generated by ion-beam-assisted deposition. The defined intrinsic film stress controlled by the ion-to-atom arrival ratio influences the corrosion properties. Increasing the ion-to-atom ratios usually improves the corrosion resistance.