Digit pipelined arithmetic on fine-grain array processors

In this paper, we present a novel scheme for performing fixed-point arithmetic efficiently on fine-grain, massively parallel, programmable architectures including both custom and FPGA-based systems. We achieve anO(n) speedup, wheren is the operand precision, over the bit-serial methods of existing fine-grain systems such as the DAP, the MPP and the CM2, within the constraints of regular, near neighbor communication and only a small amount of on-chip memory. This is possible by means of digit pipelined algorithms which avoid broadcast and which operate in a fully systolic manner by pipelining at the digit level. A base 4, signed-digit, fully redundant number system and on-line techniques are used to limit carry propagation and minimize communication costs. p ]Although our algorithms are digit-serial, we are able to match the performance of the bit-parallel methods, while retaining low communication complexity. Reconfigurable hardware systems built using field programmable gate arrays (FPGA's) can share in the speed benefits of these algorithms. By using the organization of logic blocks suggested in this paper, problems of placement and routing that exist in such systems can be avoided. Since the algorithms are amenable to pipelining, very high throughput can be obtained.     

Synthesis,characterisation and use of 2-tetradecylcyclobutanone together with other cyclobutanones as markers for irradiated liquid whole egg

The synthesis and characterisation of 2-tetradecylcyclobutanone (TCB) is described. Both 2-dodecykyclobutanone and TCB were shown to be present in liquid whole egg irradiated at doses of 2.5 and 10.0 kGy. These compounds were absent from the unirradiated pasteurised samples. Using gas chromatography and infrared spectroscopy, there was also evidence for the presence in irradiated egg of 2-tetradeccnyl- and 2-tetradecadienylyclobutanone which are formed from oleic and linoleic acids, respectively. Authentic standards for these unsaturated cyclobutanones were not available commercially but the presence of 2-tetra-decenylcyclobutanone was substantiated by hydrogenating the egg extracts so converting this unsaturated cyclobutanone to TCB. Saturated and unsaturated cyclobutanones appear to be specific products of irradiation and are potential markers for detection of irradiated liquid egg and probably other fat-containing foods.     

Iterative voting for inference of structural saliency and characterization of subcellular events.

Saliency is an important perceptual cue that occurs at different levels of resolution. Important attributes of saliency are symmetry, continuity, and closure. Detection of these attributes is often hindered by noise, variation in scale, and incomplete information. This paper introduces the iterative voting method, which uses oriented kernels for inferring saliency as it relates to symmetry. A unique aspect of the technique is the kernel topography, which is refined and reoriented iteratively. The technique can cluster and group nonconvex perceptual circular symmetries along the radial line of an object's shape. It has an excellent noise immunity and is shown to be tolerant to perturbation in scale. The application of this technique to images obtained through various modes of microscopy is demonstrated. Furthermore, as a case example, the method has been applied to quantify kinetics of nuclear foci formation that are formed by phosphorylation of histone gammaH2AX following ionizing radiation. Iterative voting has been implemented in both 2-D and 3-D for multi image analysis.     

Assessment of myocardial lesion size during in vitro radio frequency catheter ablation

We report our experience with a system that utilizes changes in several biophysical characteristics of cardiac tissue to determine lesion formation and to estimate lesion size both on and off-line in vitro during radio frequency (RF) energy delivery. We analyzed the reactive and resistive components of tissue impedance and tracked the change of phase angle during RF ablation. We correlated the amount of tissue damage with these and other biophysical parameters and compared them with off-line analysis. We found that there are irreversible changes in the reactive and resistive components of impedance that occurred during tissue ablation. The irreversible changes of these components are greater in magnitude, and correlate better with the size of lesions than that of impedance alone that is currently used. Numerically, the best single on-line and off-line correlation for combined perpendicular and parallel electrode orientation was with phase angle. On-line and off-line capacitance and susceptance correlations were essentially similar suggesting that they may be useful as lesion size predictors, given these parameter's persistent change without temperature sensitivity. This study indicates that it is technically feasible to assess lesion formation using biophysical parameters.     

Dropping False Packet to Increase the Network Lifetime of Wireless Sensor Network using EFDD Protocol

In Wireless Sensor Network (WSN) sensors are densely deployed where the intruders can compromise some sensor nodes and inject false data in order to raise false alarms, reduce network lifetime, utilize bandwidth resources and so on. False Data Injection can possibly occur in Data Aggregation (DA) and Data Forwarding (DF). This paper analyses EFDD Protocol-Early False Data Detection Protocol which addresses the two possibilities in a simple and secure way considering the constraints of sensor nodes. The main idea is the selection of the network structure; this protocol will work effectively in Spatial/Semantic Correlation Tree Structure (SCT). False Data Detection in DA is done using some monitoring nodes which will monitor the Data Aggregator. EFDD in SCT structure reduce the counterfeit data transmission when compared to other structure in a better way. The result shows that EFDD reduce data transmission by dropping false data earlier and it also reduces computation when compared to the existing schemes.     

Structural and Spectroscopic Studies of Sm3+/CdS Nanocrystallites in Sol–Gel TiO2-ZrO2 Matrix

A sol–gel method was used to prepare titania-zirconia matrices doped with Sm³⁺/CdS nanocrystallites. The structural properties of the matrices were characterized using transmission electron microscopy (TEM), thermogravimetric analysis (TGA), differential thermal analysis (DTA), and Fourier-transform infrared spectroscopy studies. The thermal stability of the material was determined by TGA/DTA analysis. The absorption spectrum shows the characteristic peaks of the Sm³⁺ ions and the absorption peak corresponding to the CdS nanocrystallites. The optical bandgap and size of the CdS nanoparticles were calculated from the absorption spectrum. From TEM, the interplanar distance (d) was estimated to be 3.533 Å, which matches with the (1 0 0) plane of bulk CdS. The measurements yield a nanocrystallite size of around 7.8 nm. The optical absorption and emission spectra confirmed the formation of CdS nanoparticles along with samarium ions in the titania-zirconia matrices. The fluorescence intensity of the samarium ions was found to be greatly enhanced by codoping with CdS nanocrystallites.     

Arithmetic operations inGF(2 m )

This article is concerned with various arithmetic operations inGF(2 ^m ). In particular we discuss techniques for computing multiplicative inverses and doing exponentiation. The method used for exponentiation is highly suited to parallel computation. All methods achieve much of their efficiency from exploiting a normal basis representation in the field.     

Extraction and on-line concentration of flavonoids in Brassica oleracea by capillary electrophoresis using large volume sample stacking

Flavonoids are bioactive compounds found in plants. Studies indicate consumption of food containing these compounds may reduce the incidences of cancer and cardiovascular diseases. In broccoli, the flavonoids are present at variable concentrations and so far have mainly been determined using high performance liquid chromatography (HPLC). This paper describes a rapid capillary electrophoresis method, involving large volume sample stacking (LVSS), suitable for the analysis of flavonoids in broccoli. Following acid hydrolysis, the two key flavonoids (kaempferol and quercetin) in a broccoli extract were concentrated on-line by LVSS prior to separation by capillary zone electrophoresis (CZE). Using an optimised method, the extract was injected for 50 s into a 50 μm (internal diameter) × 85 cm (total length) capillary followed by stacking/matrix removal at −5 kV for 83 s. The two analytes were then separated in less than 8 min by CZE using a 10 mM sodium borate buffer (pH 8.40) and a separation voltage of +30 kV at 30 °C. A linear relationship in the range 1–20 ppm was observed for the method (r² = 0.9991–0.9995) with detection limits of 0.9 and 0.6 mg/kg of broccoli for kaempferol and quercetin, respectively. This method demonstrated good repeatability for the standard and extract with relative standard deviations of less than 5% for both peak area and migration time measured over five different days (n = 5). The method was successfully applied to quantitatively determine kaempferol and quercetin contents in a commercial broccoli sample as 11.8 and 14.6 mg/kg fresh weight, respectively. This result was validated by HPLC analysis and is within the ranges reported in the literature.     

Modulation of rheological properties by heat-induced aggregation of whey protein solution

Heat-induced protein aggregation at low protein concentrations generally leads to higher viscosities. We here report that aggregated protein can yield weaker gels than those from native protein at the same concentration. Aggregated protein was produced by heating a solution of whey protein isolate (WPI) at 3% and 9% w/w. The higher protein concentration resulted in a larger aggregate size and a higher intrinsic viscosity. The protein fraction in native WPI had the smallest size and the lowest intrinsic viscosity. The same trend was observed for the shear viscosity after concentrating the suspensions containing aggregates to around 15% w/w. Suspensions containing aggregates that were produced from a higher concentration possessed a higher viscosity. After reheating the concentrated suspensions, the suspension from the 9% w/w aggregate system produced the weakest gel, followed by the one from 3% w/w, while the native WPI yielded the strongest gel. Reactivity of the aggregates was also an important factor that influenced the resulting gel properties. We conclude that aggregation of whey protein solution is a feasible route to manipulate the gel strength of concentrated protein systems, without having to alter the concentration of the protein.