Sound localisation ability of soldiers wearing infantry ACH and PASGT helmets

Helmets provide soldiers with ballistic and fragmentation protection but impair auditory spatial processing. Missed auditory information can be fatal for a soldier; therefore, helmet design requires compromise between protection and optimal acoustics. Twelve soldiers localised two sound signals presented from six azimuth angles and three levels of elevation presented at two intensity levels and with three background noises. Each participant completed the task while wearing no helmet and with two U.S. Army infantry helmets – the Personnel Armor System for Ground Troops (PASGT) helmet and the Advanced Combat Helmet (ACH). Results showed a significant effect of helmet type on the size of both azimuth and elevation error. The effects of level, background noise, azimuth and elevation were found to be significant. There was no effect of sound signal type. As hypothesised, localisation accuracy was greatest when soldiers did not wear helmet, followed by the ACH. Performance was worst with the PASGT helmet.     

Biological conversion of low-grade coal discard to a humic substance-enriched soil-like material

International Journal of Coal Science & Technology - A mutualistic relationship between grasses, coal-degrading fungi, and arbuscular mycorrhizal fungi was proposed to account for the...     

Banana peel: an effective biosorbent for aflatoxins

This work reports the application of banana peel as a novel bioadsorbent for in vitro removal of five mycotoxins (aflatoxins (AFB1, AFB2, AFG1, AFG2) and ochratoxin A). The effect of operational parameters including initial pH, adsorbent dose, contact time and temperature were studied in batch adsorption experiments. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pH_pzc) analysis were used to characterise the adsorbent material. Aflatoxins’ adsorption equilibrium was achieved in 15 min, with highest adsorption at alkaline pH (6–8), while ochratoxin has not shown any significant adsorption due to surface charge repulsion. The experimental equilibrium data were tested by Langmuir, Freundlich and Hill isotherms. The Langmuir isotherm was found to be the best fitted model for aflatoxins, and the maximum monolayer coverage (Q₀) was determined to be 8.4, 9.5, 0.4 and 1.1 ng mg^?1 for AFB1, AFB2, AFG1 and AFG2 respectively. Thermodynamic parameters including changes in free energy (ΔG), enthalpy (ΔH) and entropy (ΔS) were determined for the four aflatoxins. Free energy change and enthalpy change demonstrated that the adsorption process was exothermic and spontaneous. Adsorption and desorption study at different pH further demonstrated that the sorption of toxins was strong enough to sustain pH changes that would be experienced in the gastrointestinal tract. This study suggests that biosorption of aflatoxins by dried banana peel may be an effective low-cost decontamination method for incorporation in animal feed diets.     

Steam reforming of methanol over ruthenium impregnated ceria,alumina and ceria–alumina catalysts

The wet impregnation method was used to prepare different ruthenium promoted Ce–Al catalysts. These catalysts were used in the steam reforming of methanol reaction (SRM). The effects of the reaction temperature (200–400 C) and the catalyst composition were studied for optimization reasons. The steam to methanol molar ratio was kept constant (S/M = 2). The promotion of cerium/aluminum oxides with Ru enhanced their catalytic activity. The catalytic test results showed that the Ru/Ce combination was the most beneficial. The synergy between Ru and cerium oxide led to the formation of active sites with excellent redox properties. For high active phase content, the 5 RuCe catalyst exhibited the highest hydrogen production amount with no CO formation. This catalyst was kept under stream for 5 days at 400 C, and no significant deactivation was observed. Copyright © 2016 John Wiley & Sons, Ltd.     

Ligand Binding to Dynamically Populated G-Quadruplex DNA

Several small-molecule ligands specifically bind and stabilize G-quadruplex (G4) nucleic acid structures, which are considered to be promising therapeutic targets. G4s are polymorphic structures of varying stability, and their formation is dynamic. Here, we investigate the mechanisms of ligand binding to dynamically populated human telomere G4 DNA by using the bisquinolinium based ligand Phen-DC3 and a combination of single-molecule FRET microscopy, ensemble FRET and CD spectroscopies. Different cations are used to tune G4 polymorphism and folding dynamics. We find that ligand binding occurs to pre-folded G4 structures and that Phen-DC3 also induces G4 formation in unfolded single strands. Following ligand binding to dynamically populated G4s, the DNA undergoes pronounced conformational redistributions that do not involve direct ligand-induced G4 conformational interconversion. On the contrary, the redistribution is driven by ligand-induced G4 folding and trapping of dynamically populated short-lived conformation states. Thus, ligand-induced stabilization does not necessarily require the initial presence of stably folded G4s.     

Apparatus for the vertical orientation cone calorimeter testing of flexible polyurethane foams

Of concern to regulators and fire safety engineers is how flexible polyurethane foam drips and flows during burning. Specifically, flexible polyurethane foam forms a burning ‘pool’ of liquid as the foam decomposes, which can lead to accelerated flashover events. To fully study this phenomenon where the ‘pool fire’ accelerates heat release, large‐scale tests like the furniture calorimeter (American Society of Testing and Materials (ASTM) E1537) are used, and no small‐scale technique exists. In this paper, we present our work in developing a new sample holder that works with a bench‐scale heat release test, the cone calorimeter (ASTM E1354). The holder was built upon designs developed by the National Institute of Standards and Technology, which placed the foam in a cage in a vertical orientation during cone calorimeter testing. In this paper, we show the schematics for this test apparatus, as well as results obtained with this apparatus on four different flexible foams (shape memory and high‐density foam, flame retarded and non‐flame retarded). We compare the results from the vertical testing with that obtained via traditional horizontal ASTM E1354 testing. The advantages and disadvantages of this new apparatus are discussed in this paper. Copyright © 2014 John Wiley & Sons, Ltd.     

Fluorescent Amino Acid Initiated de novo Cyclic Peptides for the Label-Free Assessment of Cell Permeability**

The major obstacle in applying peptides to intracellular targets is their low inherent cell permeability. Standard approaches to attach a fluorophore (e. g. FITC, TAMRA) can change the physicochemical properties of the parent peptide and influence their ability to penetrate and localize in cells. We report a label-free strategy for evaluating the cell permeability of cyclic peptide leads. Fluorescent tryptophan analogues 4-cyanotryptophan (4CNW) and β-(1-azulenyl)-L-alanine (AzAla) were incorporated into in vitro translated macrocyclic peptides by initiator reprogramming. We then demonstrate these efficient blue fluorescent emitters are good tools for monitoring peptide penetration into cells.     

Effect of network mesh size and swelling to the drug delivery from pH responsive hydrogels

pH responsive hydrogels are ideal platforms for numerous therapeutic delivery applications, including oral delivery, as they are capable of overcoming the many barriers that must be considered when creating an effective drug delivery system. Understanding of the innate hydrogel network structure and its swelling behavior at environmentally relevant conditions is vital for designing hydrogel network capable of effective controlled drug release. Herein, we explored how to expand traditional techniques of swelling and pore characterization to gain better insight into the performance of anionic microparticles composed of the poly(methyl methacrylate-co-acrylic acid) with varying molar percentage of 10, 20, and 30 mol% of MMA, for controlled release of low-molecular-weight drugs. By evaluating these carrier systems at environmental conditions, we can observe changes in swelling and pore size of the anionic hydrogel networks as a function of MMA, which was then correlated with the release profiles of the small-molecular-weight drug sodium nitrate. With the correlation of the swelling behavior of the networks and the release profiles, we demonstrated how the expansion of swelling parameters at relevant pH values provides further incite for evaluating for the optimal blend for controlled release. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48767.     

Probing Protein Folding with Sequence-Reversed α-Helical Bundles

Recurrent protein folding motifs include various types of helical bundles formed by α-helices that supercoil around each other. While specific patterns of amino acid residues (heptad repeats) characterize the highly versatile folding motif of four-α-helical bundles, the significance of the polypeptide chain directionality is not sufficiently understood, although it determines sequence patterns, helical dipoles, and other parameters for the folding and oligomerization processes of bundles. To investigate directionality aspects in sequence-structure relationships, we reversed the amino acid sequences of two well-characterized, highly regular four-α-helical bundle proteins and studied the folding, oligomerization, and structural properties of the retro-proteins, using Circular Dichroism Spectroscopy (CD), Size Exclusion Chromatography combined with Multi-Angle Laser Light Scattering (SEC-MALS), and Small Angle X-ray Scattering (SAXS). The comparison of the parent proteins with their retro-counterparts reveals that while the α-helical character of the parents is affected to varying degrees by sequence reversal, the folding states, oligomerization propensities, structural stabilities, and shapes of the new molecules strongly depend on the characteristics of the heptad repeat patterns. The highest similarities between parent and retro-proteins are associated with the presence of uninterrupted heptad patterns in helical bundles sequences.     

Introduction of sulfhydryl groups and disulfide linkage to mungbean 8Sα globulin and effects on physicochemical and functional properties

Sulfhydryl groups and disulfide bond were introduced in mungbean's major storage protein, 8Sα globulin, by protein engineering to improve structural stability and functional properties. Five modified proteins or mutants (F59C, I99C, A213C, one free sulfhydryl group; I99C/A213, one disulfide bridge; F59C/I99C/A213C, one free sulfhydryl group and one disulfide linkage) were expressed in Escherichia coli at a yield similar to that of the unmodified protein or wild type (WT) in soluble form (38%). The number of introduced groups in the mutants was confirmed by Ellman analysis. Mutant and WT proteins exhibited similar elution patterns on gel filtration indicating their trimeric native conformation. Mutants had 2 to 3.8 °C higher T_m values than WT and were digested by chymotrypsin at 52–58% in 60 min but exhibited different digestion patterns. All mutants showed greater hardness of heat-induced gels than WT, especially I99C/A213C and F59C/I99C/A213C. Results indicate the improved structural stability of the modified 8Sα globulin.