Seed morphology using SEM techniques for identification of useful grasses in Dera Ghazi Khan,Pakistan

In recent study, 15 taxa of family Poaceae from Dera Ghazi Khan were investigated for morphological characterization of seeds. Scanning electron microscopy (SEM) was utilized to study morphological features of grass seeds. Moreover, economic importance of studied taxa has been discussed in present research. Grass seeds or caryopsis were collected in their mature state from different areas of Dera Ghazi Khan. Collected caryopses were subjected to SEM to investigate surface sculpture, epidermal cell shape, and cell wall patterns. Caryopsis shape observed was elliptic to oval. Also, the morphology of plant is being investigated. Cell wall pattern observed was straight and wavy. Surface sculpturing varies from smooth to reticulate. Epidermal cell shape was either wavy or irregular. Hilum position is terminal in all species. Epidermal cell structure and cell wall pattern was not observable in some species. Major variations among studied taxa were observed in terms of seed surface pattern. Five types of caryopsis surface pattern were observed namely, striate, smooth, reticulate, papillate, and granulate. Investigated taxa illustrated variations in terms of studied morphological features. Utilization of SEM has been proved very helpful in exploring seed morphological features. These observed features can aid in delimitation and identification of various grass taxa. Recent research recommends the utilization of SEM for caryopsis morphology to solve the identification issue of problematic grass genera.     

Design optimization of clutch housing mold by fluid flow and solidification simulation

Aluminum die casting is so complex where flow momentum is critical matter in the mould filling process due the high velocity of the liquid metal. Actually, in complex parts the exact calculation of mould filling performance with using experimental knowledge is almost impossible. Aluminum die castings play a definitive role in the manufacturing of lightweight automobile bodies. Hence it is more essential today that these castings be produced with the high quality methods. In this condition the simulation is becoming more important in the designing procedure. This saves time and reduces the cost of the casting system design, which is an advantage of using simulation programs. Also, economical utilization of materials can be obtained when the quantity of test castings is decreased. This paper describes the advantages of the clutch housing die casting mold simulations to achieve better casting system design in High pressure die castings (HPDC). Filling analysis is used to determine the size and location of the gate as well as proper runner system design for ensuring a complete and balanced filling of the clutch housing part.

     

Optimization of Lipase-Catalyzed Fractionation of Two Conjugated Linoleic Acid (CLA) Isomers

The separation of two isomers of conjugated linoleic acid is highly significant since each exhibits different biochemical properties. The aim of this study was to investigate and optimize several factors affecting the esterification of l-menthol with the c9,t11-CLA isomer in an organic solvent-free system using lipase from Candida rugosa (Lipase AY-30). D-optimal design with 5 factors and 3 levels were employed to evaluate the effects of synthesis parameters; reaction time (8–24 h), temperature (30–50 °C), enzyme content (2–20 U/ml), substrate molar ratio of conjugated linoleic acid oil to l-menthol (2:1–1:2) and pH (6–8) on esterification of c9,t11-CLA with l-menthol. Based on the analysis of the residual amount of c9,t11-CLA in the free fatty acid fraction after just one-step esterification, the optimum synthesis conditions were as follows: reaction time 23.12 h, temperature 32.65 °C, enzyme amount 135.40 U, molar ratio of CLA oil to l-menthol at 1:1.7 and pH at 7.7; the lowest purity of c9,t11-CLA in free fatty acid fraction based on the total content of c9,t11 and t10,c12-CLA isomers was 8.6 %.     

Surfactant Synthesis via Lipase Esterification of Methyl α-d-Glucopyranoside with Selected Aliphatic Carboxylic Acids

Lipase‐catalyzed esterification and properties of synthesized carbohydrate esters were investigated. Methyl α‐d ‐glucopyranoside was the acyl group acceptor and different carbon atom chain lengths of aliphatic carboxylic acids (C12, C14 and C16) as the acyl group donors were applied in the esterification. Physico‐chemical studies on the synthesized carbohydrate esters were carried out. It was found that melting point for the methyl 6‐O‐hexadecanoyl‐α‐d ‐glucopyranoside was the highest consecutively followed by methyl 6‐O‐tetradecanoyl‐α‐d ‐glucopyranoside and methyl 6‐O‐dodecanoyl‐α‐d ‐glucopyranoside. Liquid crystal properties of the synthesized carbohydrate ester synthesized were evaluated via optical polarized microscopy. It was found that the liquid crystal textures for mono‐substituted carbohydrate esters were of the smectic phase. In a quaternary system (carbohydrate ester/n‐butanol/n‐hexadecane/water), a maximum 34 % of water (by mass) was contained in the monophasic region of methyl 6‐O‐tetradecanoyl‐α‐d ‐glucopyranoside and a maximum of 52 % water (by mass) was contained in a monophasic methyl 6‐O‐dodecanoyl‐α‐d ‐glucopyranoside. For methyl‐6‐O‐dodecanoyl‐α‐d ‐glucopyranoside, its concentration at aggregation was 5.2 × 10^?4 mM, with minimum air/water surface tension of 26 mN m^?1. The Gibbs energy of micellization was calculated at ?50 kJ mol^?1. The maximum adsorption density of methyl 6‐O‐dodecanoyl‐α‐d ‐glucopyranoside was determined at 4 × 10^?6 mol m^?2 while its minimum area per surfactant molecule at the air/water surface was 47 Ų.     

Investigation of biocompatible nanosized materials for development of strong calcium phosphate bone cement: Comparison of nano-titania,nano-silicon carbide and amorphous nano-silica

The present paper deals with the effect of adding SiC, TiO₂ and SiO₂ nanoparticles on setting time, mechanical strength and hydraulic reactions of calcium phosphate cements (CPCs). The initial and final setting times of CPC increased by adding both nano-SiC and nano-TiO₂ additives but decreased by using nano-silica. Nano-titania and nano-silica had great effect on compressive strength of as-set CPC whereas slight changes were found by using nano-SiC. Although a sharp increase in compressive strength of all cements was observed by soaking them in physiological solution, the soaked additive-free cements and nano-SiO₂-added ones exhibited the greatest strength values. The results showed that adding these nano-additives did not influence on conversion rate of cement reactants to apatite phase during soaking in physiological solution period but the morphology of the formed phase was almost different. Overall, the results determined that nano-SiO₂ and nano-TiO₂ particles were appropriate additives to improve short-term mechanical strength of CPCs a(s-set CPCs), though nano-SiO₂ was found more effective because it improves the long-term mechanical strength of CPC (after soaking) too.     

Effects of starch addition on the characteristics of CoAl2O4 nano pigments

Nanocrystalline cobalt aluminate spinel, CoAl₂O₄, was prepared via a microwave‐assisted solution combustion process applying various mixtures of urea, glycine, and starch as a novel mixed fuel. The effects of starch addition (0, 10, 20, and 30 wt%) on the physical characteristics (e.g. crystallite size and colour) of the blue nano pigments were also investigated. The resultant powders were characterised by means of X‐ray diffraction, scanning electron microscopy, electron dispersive X‐ray analysis, and CIE L*a*b* colour measurements. The presence of a CoAl₂O₄ spinel lattice after calcination of precursors at 600 °C was confirmed by X‐ray diffraction patterns, and the crystallite sizes were ca. 10–39 nm. Colorimetric data pointed to the formation of bright‐blue pigments at low levels of starch addition. Scanning electron microscope images showed that starch enrichment reduced the agglomeration and size of synthesised nanoparticles.     

Implication of scanning electron microscopy as a tool for identification of novel,nonedible oil seeds for biodiesel production

Biodiesel is a promising, bio-based, renewable, nontoxic, environment friendly, and alternative fuel for petroleum derived fuels which helps to reduce dependency on conventional fossil fuels. In this study, six novel, nonedible seed oil producing feedstock were explored for their potential for sustainable production of biodiesel. It is very important to correctly identify oil yielding plant species. Scanning electron microscopy (SEM) was used as reliable tool for authentic identification of oil yielding seeds. Macromorphological characters of seeds were studied with light microscopy (LM). Outcomes of LM of seeds exposed distinctive variation in seed size from 16.3 to 3.2 mm in length and 12.4 to 0.9 mm in width, shape varied from oval to triangular, and color from black to light brown. Oil content of nonedible seed ranged from 25 to 30% (w/w). Free fatty acid content of seed oil varied from 0.32 to 2.5 mg KOH/g. Moreover, ultra structural study of seeds via SEM showed variation in surface sculpturing, cell arrangement, cell shape, periclinal wall shape, margins, protuberances, and anticlinal wall shape. Surface sculpturing varied from rugged, reticulate, varrucose, papillate, and striate. Periclinal wall arrangements confirmed variation from rough, wavy, raised, depressed, smooth, and elevated whereas, anticlinal walls pattern showed variation from profuse undulating, smooth, raised, grooved, deep, curved, and depressed. It was concluded that SEM could be a latent and advanced technique in unveiling hidden micromorphological characters of nonedible oil yielding seeds which delivers valuable information to researchers and indigenous people for precise and authentic identification and recognition.     

Evaluation of indoor environmental quality conditions in elementary schools׳ classrooms in the United Arab Emirates

This study presents findings of indoor environmental quality (IEQ) investigations conducted in elementary schools׳ classrooms in the United Arab Emirates (UAE). Average TVOC, CO₂, O₃, CO, and particle concentrations measured in the classrooms were 815 µg/m³, 1605 ppm, 0.05 ppm, 1.16 ppm, and 1730 µg/m³, respectively. Whereas, local authority known as Dubai Municipality recommended 300 µg/m³, 800 ppm, 0.06 ppm, 9 ppm, and 150–300 µg/m³ for TVOC, CO₂, O₃, CO, and particle, respectively. Dubai Municipality recommended temperature and relative humidity (RH) levels of 22.5 °C to 25.5 °C and 30%–60%, respectively. Average temperature and RH levels measured in the classrooms were 24.5 °C and 40.4%, respectively. Average sound level in the classrooms was 24 dB greater than recommended sound level limit of 35 dB. Six (6) classrooms had average lux levels in the range of 400–800 lux. Two (2) classrooms had average lux levels in the range of 100–200 lux. The remaining classrooms had lux levels around the recommended 300 lux. High occupancy density was observed in majority of the studied classrooms. Observations during walkthrough investigations could be used to explain measured IEQ data. Poor IEQ conditions in the studied classrooms highlight the need for further research investigation to understand how poor classrooms׳ IEQ condition could influence students׳ health, comfort, attendance rate, and academic performance.