Scaling up experiments of honeycomb catalysts for oxidation of hydrogen and methane gases

For a large volume air cleanup system in nuclear fusion facility honeycomb type oxidizing catalyst offers more useful advantage in terms of their low pressure drop than the conventional particle packed bed. Scaling up examination of 35 times large volume Pd catalyst deposit on metal honeycomb Al–Cr-steel alloy had been performed comparing with fundamental small size honeycomb. The catalyst was heated up to over 400 °C with stepwise by combined the inner and external heaters under various flow rate of processing gas containing various concentrations of hydrogen and methane. Then oxidizing reaction rates and the catalytic activation energies were evaluated and thermal property of catalyst bed was estimated considering exothermic oxidizing reaction in the process gas. As a result it was revealed that the scaling up honeycomb catalyst bed would be practically useful for the air cleanup system.     

A Rapid Determination of Ergosterol in Grains Using Gas Chromatography–Mass Spectrometry Method Without Derivatization

Food Analytical Methods - A simple, rapid and sensitive GC-MS method using on-column injection was developed and validated to determine ergosterol (ERG) levels in maize and wheat. In this method,...     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

Preparations and tribological properties of soft-metal/DLC composite coatings by RF magnetron sputter using composite targets

This work reports the characteristics and tribological properties of both Ag/DLC nanocomposite coatings (RF-Ag-DLC) and Cu/DLC nanocomposite coatings (RF-Cu-DLC) with hydrogen-free DLC matrix deposited by RF magnetron sputtering using a concentric composite target (CCT). The CCT consisted of a C base target and metal tablet, and the tablet was located on the center of the base target concentrically where the etching rate by Ar ions is extremely low. By changing the diameter of Ag or Cu tablets in CCT, RF-Ag-DLC with an Ag concentration ranging from 6 to 65 at.% and RF-Cu-DLC with Cu concentration ranging from 7 to 75 at.% can be prepared. These coatings show a granular structure having Ag or Cu nano-crystals with a diameter ranging from 5 to 10 nm dispersed homogeneously in the hydrogen-free DLC matrix. The friction coefficient of DLC varied depending on the species and content of metal. The transition of the friction coefficient became stable when metal-rich tribofilms formed on the counterfaces.