Nitrogen-doped graphene-supported zinc sulfide nanorods as efficient Pt-free for visible-light photocatalytic hydrogen production

Nitrogen-doped graphene-ZnS composite (NG-ZnS) was synthesized by thermal treatment of graphene-ZnS composite (G-ZnS) in NH₃ medium. In the second step, the as-synthesized samples were deposited on indium tin oxide glass (ITO) by electrophoretic deposition for photocatalytic hydrogen evolution reaction. The as-prepared NG-ZnS-modified ITO electrode displayed excellent photocatalytic activity, rapid transient photocurrent response, superior stability and high recyclability compared to the pure ZnS and G-ZnS-modified ITO electrode due to the synergy between the photocatalytic activity of ZnS nanorods and the large surface area and high conductivity of N-graphene.     

Ce3+-doped LaF3 nanoparticles: Wet-chemical synthesis and photo-physical characteristics “optical properties of LaF3:Ce nanomaterials”

The most effective process parameters were determined to synthesize spherical LaF₃ nanoparticles with controllable size based on ethylenediaminetetraacetic acid (EDTA) via co-precipitation technique. Thermogravimetricdifferential thermal analysis, X-ray diffraction, scanning electron microscopy, dynamic light scattering and FT-IR spectroscopy were used to characterize the resulting powders. Detailed investigations revealed that the optimal LaF₃ host nano-material was obtained when NH₄F was used as a fluoride source in the presence of EDTA at pH = 5. Furthermore, photoluminescence spectra showed an intense double emission peak at 289 and 302 nm for cerium-doped LaF₃ nanocrystals excited at 253 nm, which was assigned to the well-known 5d→4f (²F_5/2 and ²F_7/2) transitions of Ce³⁺ levels due to luminescence center mechanism. The experimental results indicate that the synthesized LaF₃:0.05Ce powders with a band gap of 5.3 eV are promising phosphors for high density scintillators.     

Experimental Study and Mathematical Modeling of NO Removal Using the UV/H2O2 Advanced Oxidation Process

An experimental study on NO removal via UV/H₂O₂ process was conducted in a semi‐continuous bubble‐column reactor and the effect of some operation parameters including NO initial concentration and gas flow rates on removal efficiency was investigated. Applying UV light increased the efficiency significantly. The steady‐state removal efficiency was found to be higher at the lower gas flow rates. The bubble size as an important factor in mass transfer calculations and modeling procedure was determined at different gas flow rates using bubble photographs and image processing technique. In the ranges of flow rates studied here, the gas flow rate had no significant effect on the bubble diameter. A mathematical model was developed to describe the NO removal process. The model predictions were compared with existing experimental data, confirming a good agreement of the data.     

Glassy carbon electrodes modified with a film of nanodiamond-graphite/chitosan: Application to the highly sensitive electrochemical determination of Azathioprine

A novel modified glassy carbon electrode with a film of nanodiamond-graphite/chitosan is constructed and used for the sensitive voltammetric determination of azathioprine (Aza). The surface morphology and thickness of the film modifier are characterized using atomic force microscopy. The electrochemical response characteristics of the electrode toward Aza are investigated by means of cyclic voltammetry. The modified electrode showed an efficient catalytic role for the electrochemical reduction of Aza, leading to a remarkable decrease in reduction overpotential and enhancement of the kinetics of the electrode reaction with a significant increase of peak current. The effects of experimental variables, such as the deposited amount of modifier suspension, the pH of the supporting electrolyte, the accumulation potential and time were investigated. Under optimal conditions, the modified electrode showed a wide linear response to the concentration of Aza in the range of 0.2-100 μM with a detection limit of 65 nM. The prepared modified electrode showed several advantages: simple preparation method, high stability and uniformity in the composite film, high sensitivity, excellent catalytic activity in physiological conditions and good reproducibility. The modified electrode can be successfully applied to the accurate determination of trace amounts of Aza in pharmaceutical and clinical preparations.     

Tuning parallel applications in parallel

In this paper, we present and evaluate a parallel algorithm for parameter tuning of parallel applications. We discuss the impact of performance variability on the accuracy and efficiency of the optimization algorithm and propose a strategy to minimize the impact of this variability. We evaluate our algorithm within the Active Harmony system, an automated online/offline tuning framework. We study its performance on three benchmark codes: PSTSWM, HPL and POP. Compared to the Nelder–Mead algorithm, our algorithm finds better configurations up to seven times faster. For POP, we were able to improve the performance of a production sized run by 59%.     

QoS provisioning and tracking fluid policies in input queueingswitches

The concept of tracking fluid policies by packetized policies is extended to input queueing switches. It is considered that the speedup of the switch is one. One of the interesting applications of the tracking policy in TDMA satellite switches is elaborated. For the special case of 2×2 switches, it is shown that a tracking nonanticipative policy always exists. It is found that, in general, nonanticipative policies do not exist for switches with more than two input and output ports. For the general case of N×N switches, a heuristic tracking policy is provided. The heuristic algorithm is based on two notions: port tracking and critical links. These notions can be employed in the derivation of other heuristic tracking policies as well. Simulation results show the usefulness of the heuristic algorithm and the two basic concepts it relies on     

Influence of the molecular weight of chitosan on the spinnability of chitosan/poly(vinyl alcohol) blend nanofibers

The electrospinning of the biopolymer chitosan (CS) and poly(vinyl alcohol) (PVA) was investigated with 90% acetic acid as the solvent and with different CS/PVA ratios. The long chains of high‐molecular‐weight CS prevented it from forming nanofibers in a high‐voltage field. The treatment of CS under high‐temperature alkali conditions reduced its molecular weight exponentially with the treatment time and caused a reduction of the viscosity consequently. PVA, acting as a plasticizer and accompanied by the alkali‐treated CS of lower viscosity, made the electrospinning of CS/PVA blends possible. The effects of the duration of the alkali treatment on the molecular weight of CS and its viscosity were investigated and optimized. The diameter of the bicomponent nanofiber decreased proportionally with the increase in the CS portion, whereas the surface porosity increased inversely. Fourier transform infrared studies illustrated that the alkali treatment or blending of CS with PVA had no effect on its chemical nature. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A comparative evaluation of crumb rubber and devulcanized rubber modified binders

One of the most prominent uses of ground tire rubber (GTR) is in rubber-modified asphalt industry. Besides improving performance properties of binders, GTR induces some drawbacks like weak storage stability and inferior low temperature (LT) performance. This study sought to rectify these shortcomings through using devulcanized rubber (DVR) in place of common GTR. Binder performance grading, multiple stress creep and recovery, and storage stability tests were conducted. More resistance against traffic loads at high temperatures was observed as DVR's advantages over GTR, while its weaker LT characteristics and lower storage stability can prevent it from being a viable alternative.     

Improving the functionality of biodegradable food packaging materials via porous nanomaterials

Non-biodegradability and disposal problems are the major challenges associated with synthetic plastic packaging. This review article discusses a new generation of biodegradable active and smart packaging based on porous nanomaterials (PNMs), which maintains the quality and freshness of food products while meeting biodegradability requirements. PNMs have recently gained significant attention in the field of food packaging due to their large surface area, peculiar structures, functional flexibility, and thermal stability. We present for the first time the recently published literature on the incorporation of various PNMs into renewable materials to develop advanced, environmentally friendly, and high-quality packaging technology. Various emerging packaging technologies are discussed in this review, along with their advantages and disadvantages. Moreover, it provides general information about PNMs, their characterization, and fabrication methods. It also briefly describes the effects of different PNMs on the functionality of biopolymeric films. Furthermore, we examined how smart packaging loaded with PNMs can improve food shelf life and reduce food waste. The results indicate that PNMs play a critical role in improving the antimicrobial, thermal, physicochemical, and mechanical properties of natural packaging materials. These tailor-made materials can simultaneously extend the shelf life of food while reducing plastic usage and food waste.     

SEOTP: a new secure and efficient ownership transfer protocol based on quadric residue and homomorphic encryption

Wireless Networks - In systems equipped with radio frequency identification (RFID) technology, several security concerns may arise when the ownership of a tag should be transferred from one owner...