External mass transfer during the adsorption of various pollutants onto activated carbon

A wide range of experimental studies are reported for the adsorption of phenol and p-chlorophenol onto activated carbon—Type Filtrasorb 400—in an agitated batch adsorber. A model has been used to determine the external mass transfer coefficient for the systems and the effect of several experimental variables have been investigated: these include agitation, initial pollutant concentration, carbon mass, carbon particle size and solution temperature. The mass transfer coefficient has been correlated in terms of the dimensionless Sh/Sc^0.33 against each variable. The Sherwood number, Sh = k_fR/D_mol, relates the external mass transfer coefficient k_f to particle radius, R, and molecular diffusivity, D_mol. The Schmidt number, Sc, is the ratio of kinematic viscosity, v, to molecular diffusivity. A few results are also reported for the adsorption of sodium dodecyl sulphate and mercuric ions onto activated carbon.     

Transport and retention of a bacteriophage and microspheres in saturated, angular porous media: effects of ionic strength and grain size

Eight saturated column experiments were conducted to examine the effects of solution chemistry and grain size on the transport of colloids through crushed silica sand. Two sizes of colloids, 0.025-μm bacteriophage (MS-2) and 1.5-μm carboxylated microspheres, were used as surrogates for the transport of pathogenic viruses and bacteria, respectively. Increasing the Ca²⁺ concentration from 1 to 4.8 mM (along with background monovalent ions) resulted in complete attenuation (>6-log decrease in C/C₀) of MS-2, but caused only a 1-log reduction (C/C₀ = 0.1) in the concentration of the microspheres. Decreasing grain size from medium sand (d₅₀ = 0.70 mm) to fine sand (d₅₀ = 0.34 mm) resulted in substantial decreases in effluent concentrations of both the MS-2 (5-log decrease) and microspheres (>2.5-log decrease). Comparison of observed colloid retention to that predicted by a recently published correlation equation for colloid filtration revealed that the model can considerably underpredict (by 4 orders of magnitude or more) colloid retention by angular sand over distances as short as 20 cm. This indicates that state-of-the-art colloid filtration models are still limited in applicability to natural systems.     

The adsorption of various pollutants from aqueous solutions on to activated carbon

The ability of activated carbon. Filtrasorb 400, to adsorb various pollutants from aqueous solutions has been studied. The pollutants investigated are phenol, p-chlorophenol, sodium dodecyl sulphate, mercuric ions and chromic(III) ions. The saturation adsorption capacity of the activated carbon for the pollutants is 213, 434, 361, 35 and 138 mg g^?1 for phenol, p-chlorophenol, sodium dodecylsulphate, chromium(III) and mercuric(II) respectively. Equilibrium isotherm analyses were undertaken using Langmuir and Freundlich equations.     

Domestic exposure to fungal allergenic particles determined by halogen immunoassay using subject's serum versus particles carrying three non‐fungal allergens determined by allergen‐specific HIA

Studies that estimate indoor aeroallergen exposure typically measure a pre‐selected limited range of allergens. In this study, inhalable aeroallergen particles were quantified using the halogen immunoassay (HIA) to determine the contribution of fungal and non‐fungal aeroallergens to total allergen exposure. Bioaerosols from 39 homes of fungal‐allergic subjects were sampled using inhalable fraction samplers and immunostained by HIA using resident subject's immunoglobulin E (IgE) to detect allergen‐laden particles. Fungal aerosols as well as particles carrying mite, cat, and cockroach allergens were identified and enumerated by HIA. Reservoir dust‐mite (Der p 1), cat (Fel d 1), and cockroach (Bla g 1) allergen concentrations were quantified by ELISA. Fungal particles that bound subject's IgE in the HIA were 1.7 (bedroom)‐ and 1.4 (living room)‐fold more concentrated than Der p 1, Fel d 1, and Bla g 1 allergen particles combined. Predominant fungal conidia that bound IgE were derived from common environmental genera including Cladosporium and other fungi that produce amerospores. Airborne mite, cat, and cockroach allergen particle counts were not associated with reservoir concentrations determined by ELISA. This study demonstrates that inhalable fungal aerosols are the predominant aeroallergen sources in Sydney homes and should be considered in future exposure assessments.     

Assessment of a multibeam Fizeau wedge interferometer for Doppler wind lidar

The Fabry-Perot interferometer is the standard instrument for the direct detection Doppler lidar measurement of atmospheric wind speeds. The multibeam Fizeau wedge has some practical advantages over the Fabry-Perot, such as the linear fringe pattern, and is evaluated for this application. The optimal Fizeau must have a resolving power of 10(6) or more. As the multibeam Fizeau wedge is pushed to such high resolving power, the interference fringes of the device become complicated by asymmetry and secondary maxima. A simple condition for the interferometer plate reflectance, optical gap, and wedge angle reveals whether a set of parameters will yield simple, Airy-like fringes or complex Fizeau fringes. Tilting of the Fizeau wedge improves the fringe shape and permits an extension of the regime of Airy-like fringes to higher resolving power. Sufficient resolving power for the wind lidar application is shown to be possible with a large-gap, low-finesse multibeam Fizeau wedge. Liabilities of the multibeam Fizeau wedge in the wind lidar application include a smaller acceptance solid angle and calibration sensitivity to localized deviations of the plates from the ideal.     

Utilization of municipal solid waste incineration ash in Portland cement clinker

Municipal solid waste incineration (MSWI) ash is used in part as raw materials for cement clinker production by taking advantage of the high contents of SiO₂, Al₂O₃, and CaO. It is necessary for environmental reasons to establish a material utilization system for the incineration waste ash residue instead of disposing these ashes into landfill. The aim of this paper is to study the feasibility of replacing clinker raw materials by waste ash residue for cement clinker production. MSWI bottom ash and MSWI fly ash are the main types of ashes being evaluated. The ashes were mixed into raw mixture with different portions of ash residue to produce cement clinker in a laboratory furnace at approximately 1400°C. X-ray diffraction and X-ray florescence techniques were used to analyze the phase chemistry and chemical composition of clinkers in order to compare these ash-based clinkers with commercial Portland cement clinker.     

Psychological testing for child and adolescent psychiatrists: a review of the past 10 years

Vibrio cholerae O1 strains isolated mostly in Japan between 1977 and 1995 were typed according to restriction fragment patterns by cleavage of genomic DNA with Sfi I and Not I and separation by Pulsed-field gel electrophoresis (PFGE). Two hundred sixty five strains from human were divided into 60 PFGE patterns (provisional types). Strains of type 2-3, 3-4, 4-5 and 51-54 were dominant in the Philippines, Thailand, India and Indonesia, respectively. Types 1-1, 2-3, 2-53, and 3-4 were detected over a long period of time in contrast to the other types. Strains of the same type (Types 1-1, 2-3, 2-53 and others) isolated from the Japanese who had never been outside Japan were often found among strains from Southeast Asia. Most strains from humans were cholera-toxin (CT)-positive, while those from the environment and the sea were generally not. 23 strains from the environment and the sea in Japan were divided into 12 types. Strains of the same types as CT-positive strains from humans could not be found in the environment and sea. These results suggest that cholera in Japan is closely related with cholera in Southeast Asia and PFGE is useful for epidemiological analysis of cholera in Japan.     

Abciximab in primary coronary angioplasty for acute myocardial infarction improves short- and medium-term outcomes

OBJECTIVES: The purpose of this study was to compare the outcome of primary percutaneous transluminal coronary angioplasty for acute myocardial infarction (MI) when performed with or without the platelet glycoprotein IIb/IIIa antibody, abciximab. BACKGROUND: Abciximab improves the outcome of angioplasty but the effect of abciximab in primary angioplasty has not been investigated. METHODS: Data were collected from a computerized database. Follow-up was by telephone or review of outpatient or hospital readmission records. RESULTS: A total of 182 consecutive patients were included; 103 received abciximab and 79 did not. The procedural success rate was 95% in the two groups. At 30-day follow-up, the composite event rate of unstable angina, reinfarction, target vessel revascularization and death from all causes was 13.5% in the group of patients who did not receive abciximab, 4% (p < 0.05) in the abciximab group and 2.4% (p < 0.05) in the subgroup of patients (n = 87) who completed the 12-h abciximab infusion. At the end of follow-up (mean 7+/-4 months), the composite event rate was 32.4%, 17% (p < 0.05) and 13.1% (p < 0.01) in these three categories respectively. Abciximab bolus followed by a 12-h infusion was an independent predictor of event-free survival, in a Cox proportional hazards model (relative risk 0.49; 95% confidence interval 0.24 to 0.99; p < 0.05). CONCLUSIONS: Abciximab given at the time of primary angioplasty may improve the short- and medium-term outcome of patients with acute MI, especially when a 12-h infusion is completed.