Distributed energy efficiency in future home environments

In this paper, a new architecture for sharing resources among home environments is proposed. Our approach goes far beyond traditional systems for distributed virtualization, like PlanetLab or grid computing, as it relies on complete decentralization in a peer-to-peer (P2P) like manner and, above all, aims at energy efficiency. Energy metrics are defined, which have to be optimized by the system. The system itself uses virtualization to transparently move tasks from one home to another to optimally utilize the existing computing power. We present an overview of our proposed architecture, consisting of a middleware interconnecting computers and routers in possibly millions of homes using P2P techniques. For demonstrating the potential energy saving of distributed applications, we present an analytical model for sharing downloads, which is verified by discrete event simulation. The model represents an optimistic case without P2P overhead and fairness. The model allows to assess the upper limit of the saving potential. An enhanced version of the simulation model also shows the effect of fairness. The fairer the system gets, the less efficient it is.     

Generation of frequency-chirped optical pulses in a large-slippagefree-electron laser

We have investigated the optical output of the free-electron laser for infrared experiments (FELIX) when it is driven by an electron beam with a ramped energy. We show that the applied slow ramp on the electron beam energy leads to a frequency chirp on each picosecond optical pulse. Typical values for the chirp are 0.2% frequency sweep across a 1.5-ps-long optical pulse. The optical pulses were analyzed with a double-grating pair and with a second-order autocorrelator. The pulse duration was reduced in the double-grating pair by 20%. A linear dependence of the chirp on the cavity desynchronization was measured     

Influence of device engineering on the analog and RF performances of SOI MOSFETs

This work presents a systematic comparative study of the influence of various process options on the analog and RF properties of fully depleted (FD) silicon-on-insulator (SOI), partially depleted (PD) SOI, and bulk MOSFET's with gate lengths down to 0.08 /spl mu/m. We introduce the transconductance-over-drain current ratio and Early voltage as key figures of merits for the analog MOS performance and the gain and the transition and maximum frequencies for RF performances and link them to device engineering. Specifically, we investigate the effects of HALO implantation in FD, PD, and bulk devices, of film thickness in FD, of substrate doping in SOI, and of nonstandard channel engineering (i.e., asymmetric Graded-channel MOSFETs and gate-body contacted DTMOS).     

Cytokine patterns in patients after major vascular surgery, hemorrhagic shock, and severe blunt trauma. Relation with subsequent adult respiratory distress syndrome and multiple organ failure

OBJECTIVE: This study investigates the course of serum cytokine levels in patients with multiple trauma, patients with a ruptured abdominal aortic aneurysm (AAA), and patients undergoing elective AAA repair and the relationship of these cytokines to the development of adult respiratory distress syndrome (ARDS) and multiple organ failure (MOF). SUMMARY BACKGROUND DATA: Severe tissue trauma, hemorrhagic shock, and ischemia-reperfusion injury are pathophysiologic mechanisms that may result in an excessive uncontrolled activation of inflammatory cells and mediators. This inflammatory response is thought to play a key role in the development of (remote) cell and organ dysfunction, which is the basis of ARDS and MOF. METHODS: The study concerns 28 patients with multiple trauma, 20 patients admitted in shock because of a ruptured AAA, and 18 patients undergoing elective AAA repair. Arterial blood was serially sampled from admission (or at the start of elective operation) to day 13 in the intensive care unit, and the serum concentrations of tumor necrosis factor-alpha (TNF-alpha), interleukin (IL)-1 beta, and IL-6 were determined. RESULTS: Twenty-two patients died, 15 within 48 hours and 7 after several weeks, as a result of ARDS/MOF. At hospital admission and after 6 hours, these nonsurvivors had significantly higher plasma TNF-alpha and IL-1 beta levels than did the survivors. At the same measuring points, TNF-alpha and IL-1 beta were significantly more elevated in patients with ruptured AAA than in traumatized patients. However, IL-6 was significantly higher in the traumatized patients. In 10 patients, ARDS/MOF developed, and 41 had an uncomplicated course in this respect. Those with ARDS/MOF exhibited significantly different cytokine patterns in the early postinjury phase. TNF-alpha and IL-1 beta levels were higher mainly on the first day of admission; IL-6 concentrations were significantly elevated in patients with ARDS/MOF from the second day onward. The latter cytokine showed a good correlation with the daily MOF score during the whole 2-week observation period. CONCLUSIONS: In the early postinjury phase, higher concentrations of these cytokines are associated, not only with an increased mortality rate, but also with an increased risk for subsequent ARDS and MOF. These data therefore support the concept that these syndromes are caused by an overwhelming autodestructive inflammatory response.     

Utility of scintigraphic methods in patients with fever of unknown origin

BACKGROUND: We assessed the utility of scintigraphy with indium 111-labeled polyclonal human IgG scintigraphy in patients with fever of unknown origin that fulfilled the criteria of temperature of 38.3 degrees C or more for at least 3 weeks and no diagnosis during 1 week of hospital admission. We compared the utility of this technique with results of scintigraphic techniques reported in the literature. METHODS: Data for all patients seen at our university hospital in whom 111In-IgG scanning was performed were analyzed and checked for the criteria for fever of unknown origin. The literature on the utility of scintigraphic techniques in patients with fever of unknown origin was reviewed. RESULTS: We studied 24 patients with fever of unknown origin. In 13 patients, focal 111In-IgG accumulation was observed. In nine (38%) of those, the positive 111In-IgG scintigram led to the final diagnosis; in the other four patients (17%), the scintigraphic findings were not helpful. In the 11 patients with negative 111In-IgG scans, extensive diagnostic workup produced no infection as the final diagnosis in nine patients (38%), one had an abscess in a renal cyst that was detected several months later, and in the other the cause of fever was an infected intravenous line. The overall sensitivity and specificity of 111In-IgG scintigraphy were 81% and 69%, respectively. The positive predictive value was 69% and the negative predictive value was 82%. CONCLUSIONS: Our results show that 111In-IgG scintigraphy significantly contributed to the diagnostic process in patients with fever of unknown origin. A positive scan increased the likelihood of finding the cause of the fever, and a negative scan ruled out an inflammatory component with a high degree of certainty. These data compare favorably with data in the literature concerning other radiopharmaceuticals; a larger prospective evaluation of this technique is indicated.     

Modifications in Booth's method for the spectrophotometric determination of?-carotene in vegetables

Summary Booth's method for the spectrophotometric determination ofß-carotene gives reliable results, but the extraction method is very laborious and tedious. Removal of the acetone from the extract and elution of the acetone-free extract on the adsorption column also require much time and attention. The authors describe the modifications made to these three parts of Booth's method for the determination of carotene. The simultaneous application of Booth's original method and of the modified method to samples of carrots, five leafy vegetables and four brassicas gave, in general, corresponding results. With brassicas a tendency was observed for the modified method to yield lower carotene contents. Using the modified method, with pureß-carotene added to samples of carrots and spinach, the authors found recoveries of 98%–100% and 86%–88% respectively.

---

Modifikationen der spektrophotometrischenß-Carotin-Bestimmung nach Booth in Gemüse

Zusammenfassung Die Ergebnisse der spektrophotometrischenß-Carotin-Bestimmung nach Booth sind zuverlässig, aber die damit verbundene Extraktionsmethode ist arbeitsintensiv und strapaziös. Auch das Entfernen von Aceton aus dem Extrakt und das Eluieren des acetonfreien Extrakts auf der Säule erfordert viel Zeit und Aufmerksamkeit. Die Autoren beschreiben die von ihnen angebrachten Modifikationen dieserß-Carotin-Bestimmung in den drei Stufen. Die gleichzeitige Anwendung der ursprünglichen Methode nach Booth und deren Modifikation brachte bei Karotten, fünf Blattgemüsen und vier Kohlarten im allgemeinen ähnliche Ergebnisse. Bei den Kohlarten war die Tendenz zu beobachten, daß mit der modifizierten Methode dieß-Carotingehalte etwas niedriger waren. Die modifizierte Methode hatte eine Rückgewinnungsquote von 98–100% bzw. 86–88% bei einem Zusatz von reinemß-Carotin zu Karotten- und Spinatproben.

     

Detection of pre-defined boundaries between hydrothermal alteration zones using rotation-variant template matching

A new method for the detection of pre-defined boundaries in single-band image data that uses a rotation-variant template matching (RTM) algorithm is presented. This algorithm matches a miniature image of a pre-defined boundary to image data at various orientations. The image pixels that match boundary criteria are reported in output imagery together with the rotation angle of the template. The method is applied to identify boundaries between hydrothermal alteration zones in processed airborne hyperspectral imagery, based on the presence of white mica minerals. Results show that boundaries identified with RTM are relatively free of noise and more coherent than those identified with, for instance, image slicing techniques. Identified boundaries can be used for image segmentation. The output of the RTM algorithm also provides information on the type of boundary, whether it is crisp or gradual. This information can be used to better characterize mineral variation in the alteration halo associated with fossil hydrothermal systems.     

Morphology and composition of nanograde calcium phosphate needle-like crystals formed by simple hydrothermal treatment

Nanograde calcium phosphate needle-like crystals are prepared from wet synthesized Ca–P precipitates by simple hydrothermal treatment at 140°C and 0.3 MPa for 2 h. The morphology of these crystals is observed by transmission electron microscopy (TEM). The phase composition is tested through X-ray diffractometer (XRD) and infrared spectroscopy (IR). It is found that the morphology of these crystals is related to the activity or fresh degree of the starting Ca–P precipitates and the added fluorine ions, but is not greatly influenced by the Ca/P ratio of the precipitates. These crystals with a Ca/P ratio between 1.67 and 1.5 show a poorly crystallized apatite structure at room temperature and a biphasic (HA+–TCP) structure at 1100°C, corresponding to their Ca/P ratio. It is demonstrated that these nonstoichiometric apatite crystals contain lattice-bound water which could play an important role in the formation of bone apatite. The similarity in morphology and composition between these needle-like crystals and the apatite crystals in bone provides a possibility to make a bone-like implant consisting of these needle-like crystals and collagen, etc.     

Robust regression methods for computer vision: A review

Regression analysis (fitting a model to noisy data) is a basic technique in computer vision, Robust regression methods that remain reliable in the presence of various types of noise are therefore of considerable importance. We review several robust estimation techniques and describe in detail the least-median-of-squares (LMedS) method. The method yields the correct result even when half of the data is severely corrupted. Its efficiency in the presence of Gaussian noise can be improved by complementing it with a weighted least-squares-based procedure. The high time-complexity of the LMedS algorithm can be reduced by a Monte Carlo type speed-up technique. We discuss the relationship of LMedS with the RANSAC paradigm and its limitations in the presence of noise corrupting all the data, and we compare its performance with the class of robust M-estimators. References to published applications of robust techniques in computer vision are also given.