The effect of pressure on GRIN lenses

The changes of the optical power of Gradient Index (GRIN) lenses occurring in hydrostatic pressures of the range of 0-2 GPa are investigated. The measurements of the position of the waist of the semiconductor laser beam revealed the increase of the optical power of the lenses with increasing pressure. The use of the special plano-concave lenses insensitive to the changes of the refractive index of the pressure medium allowed to attribute the changes to the increasing index gradient in GRIN material. The effect has been explained within the frame of Mueller’s theory of photoelasticity. The findings have been then confirmed in experiments with the plano-planar and plano-convex lenses of the same materials.     

Variation in fatty acid composition of ewes' milk during continuous transition from dry winter to natural pasture diet

The profile variations of approximately 70 fatty acids (FAs) in milk of ewes consuming total mixed rations (TMR) and grazing natural pasture were determined. Milk of ewes grazing pasture in May and September in the Slovak Republic contained 3-times more conjugated linoleic acid (CLA) (P < 0.001) and trans-vaccenic acid (TVA) (P < 0.001), and 2-times more α-linolenic acid (ALA) (P < 0.001) than that of ewes fed TMR. A doubling of the CLA and TVA contents of milk of ewes fed with TMR was achieved by changing to meadow hay containing a higher ALA content. Less availability of vegetation and lower ALA pasture content in summer (P < 0.001) caused a 2-fold decrease (P < 0.001) of CLA and TVA contents when compared with data obtained in May. With grass re-growth and an increase in pasture ALA content in September, the CLA and TVA contents rose to values similar to those obtained in May (P > 0.05). No significant differences in the FA composition in milk of ewes grazing on summer pasture at higher altitude were observed.     

Novel direct optimal and indirect method for discretization of linear fractional systems

This paper addresses the problem of discretization of fractional differintegrators and fractional systems in general. Two new discretization schemes are proposed—optimal direct method, and computationally inexpensive indirect method. The proposed methods are highly flexible and suitable for obtaining both general purpose and specialized, application-specific approximations. Both proposed methods outperform recently proposed approximations, as it is shown in several illustrative examples.     

Water management for food production: Strategy plan

This paper attempts to discover the real bottleneck of many irrigation projects: the complex of technical and nontechnical constraints which oppose the integrated and stable utilization of available soil and water resources. The efficiency of irrigation water use is the basic problem of intensive agriculture. Irrigation projects are, in the initial stage of operation, required to serve short-term objectives, such as to reach local self-sufficiency in food production. Their operation should, in the long run, nevertheless be based on a water-use concept and should reflect the desirable development of agriculture resulting from the need for further intensification and diversification of production. The establishment of the Water Management Strategy Plan for the Kirindi Oya Irrigation and Settlement Project in Sri Lanka is an example of the integrated approach to water resources development and management. This plan has been established on the basis of a multidisciplinary system analysis and simulation/optimization of the hydraulic and agricultural performance of the irrigation system.     

Evaluation and Carbon Fiber Reinforced Polymer Strengthening of Existing Garage: Case Study

The concrete-repair fiber reinforced polymer technology emerged in the United States during the past 10 years. Since 1995, carbon fiber reinforced polymer (CFRP) has been applied to strengthen concrete decks of a troubled posttensioned garage in Atlanta. During the construction of the garage, design deficiencies were found. A remedial repair, involving heavily?reinforced, 7.6 cm (3 in.) thick Gunite (Shotcrete) beams, applied to the underside of the slab between drop panels in the east-west (E-W) direction, was developed in 1984. Since then, delamination of Gunite beams and other structural problems repeatedly occurred. Epoxy injection and other limited repairs were done over the years in an attempt to remediate the problems. In 2000, due to the growing delamination concerns, backed up with nondestructive impact-echo testing results, and due to the newest set of structural analyses that showed additional design deficiencies, Simpson Gumpertz & Heger developed a new and comprehensive remedial program. The first phase of this program included an in-depth mechanical in?situ load test program to study the strength and stiffness performance of the existing typical slab spans, including the effects of Gunite beams, the loss of Gunite beams due to delamination, and the CFRP?strengthing of spans. The tests showed that the CFRP repair of E-W spans with delaminated Gunite beams is warranted and that it performs well. The performance of the existing typical spans in the north-south direction was found to be acceptable without any repairs. Further monitoring of the performance of Gunite beams is required, and additional CFRP strengthening will be done periodically. In addition, structural deficiencies of the typical second-level end bays were repaired using additional steel framing supports.     

Temperature reduction due to the application of phase change materials

Overheating is a major problem in many modern buildings due to the utilization of lightweight constructions with low heat storing capacity. A possible answer to this problem is the emplacement of phase change materials (PCM), thereby increasing the thermal mass of a building. These materials change their state of aggregation within a defined temperature range. Useful PCM for buildings show a phase transition from solid to liquid and vice versa. The thermal mass of the materials is increased by the latent heat. A modified gypsum plaster and a salt mixture were chosen as two materials for the study of their impact on room temperature reduction. For realistic investigations, test rooms were erected where measurements were carried out under different conditions such as temporary air change, alternate internal heat gains or clouding. The experimental data was finally reproduced by dint of a mathematical model.     

Optimal allocation of bioassays in the case of parametrized covariance functions: an application to Lung’s retention of radioactive particles

In this paper, we investigate the effect of employing a parametrized covariance function in a regression experiment on corresponding optimum designs. We demonstrate these effects in the framework of a real example for measuring the lung’s retention of radioactive particles. Also, two different covariance functions are considered, and it is shown that this choice can play a crucial role.      

Magnetically Controllable Silver Nanocomposite with Multifunctional Phosphotriazine Matrix and High Antimicrobial Activity

A recently developed multi‐functional phosphotriazine‐based polymer is used as a matrix for embedding γ‐Fe₂O₃ nanoparticles as well as a suitable chemical template for surface modification with silver nanoparticles. For the primary magnetic modification, maghemite nanoparticles are surface modified with oleic acid in order to render them organophilic and to prevent the aggregation of the nanoparticles. This aggregation could occur as the polymer synthesis, based on reaction of phosphonitrilic chlorine and 1,4‐phenylenediamine, takes place in toluene. The surface active amine units of the polymer structure enable the reduction of silver cations to silver nanoparticles, which are well attached and finely dispersed on its surface. The developed nanocomposite represents one of the few magnetically controllable antibacterial agents based on silver nanoparticles. Magnetic measurements reveal the completely suppressed interactions among maghemite nanoparticles because of their perfect surface coating with an organic surfactant and fine dispersion inside the polymer matrix. This magnetic nanocomposite exhibits a high antibacterial and antifungal activity as proven by tests with nine bacterial strains and four candida (yeast genus) species. For the majority of the tested species, the minimum‐inhibition concentrations are below 100 mg L^?1, which is comparable to their equivalent minimum‐inhibition concentrations in colloidal silver systems.     

Recent developments in cold plasma-based enzyme activity (browning,cell wall degradation,and antioxidant) in fruits and vegetables

According to the Food and Agriculture Organization of United Nations reports, approximately half of the total harvested fruits and vegetables vanish before they reach the end consumer due to their perishable nature. Enzymatic browning is one of the most common problems faced by fruit and vegetable processing. The perishability of fruits and vegetables is contributed by the various browning enzymes (polyphenol oxidase, peroxidase, and phenylalanine ammonia-lyase) and ripening or cell wall degrading enzyme (pectin methyl-esterase). In contrast, antioxidant enzymes (superoxide dismutase and catalase) assist in reversing the damage caused by reactive oxygen species or free radicals. The cold plasma technique has emerged as a novel, economic, and environmentally friendly approach that reduces the expression of ripening and browning enzymes while increasing the activity of antioxidant enzymes; microorganisms are significantly inhibited, therefore improving the shelf life of fruits and vegetables. This review narrates the mechanism and principle involved in the use of cold plasma technique as a nonthermal agent and its application in impeding the activity of browning and ripening enzymes and increasing the expression of antioxidant enzymes for improving the shelf life and quality of fresh fruits and vegetables and preventing spoilage and pathogenic germs from growing. An overview of hurdles and sustainability advantages of cold plasma technology is presented.