A new definition for the mole based on the Avogadro constant: a journey from physics to chemistry

The mole is the most recent addition to the set of base units that form the International System of Units, although its pre-cursor the 'gram-molecule', had been in use by both physicists and chemists for more than 120 years. A proposal has been published recently to establish a new definition for the mole based on a fixed value for the Avogadro constant. This would introduce consistent relative uncertainties for the molar and the atomic masses while making no change to the system of relative atomic masses ('atomic weights'). Although the proposal would have little impact on the measurement uncertainty of practical work, it has stimulated considerable debate about the mole and the nature of the quantity amount of substance. In this paper, the rationale for the new definition is explained against the background of changes in the way the quantity amount of substance has been used, from its first use during the early development of thermodynamics through to the use of the 'number of gram-molecules' at the end of the nineteenth century.     

Effect of the root canal final rinse protocols on the debris and smear layer removal and on the push‐out strength of an epoxy‐based sealer

The aim of the present study was to evaluate the efficacy of QMiX, SmearClear, and 17% EDTA for the debris and smear layer removal from the root canal and its effects on the push‐out bond strength of an epoxy‐based sealer by scanning electron microscopy (SEM). Forty extracted human canines (n = 10) were assigned to the following final rinse protocols: G1‐distilled water (control), G2–17% EDTA, G3‐SmearClear, and G4‐QMiX. The specimens were submitted to a SEM analysis to evaluate the presence of debris and smear layer, respectively, in the apical or cervical segments. In sequence, forty extracted human maxillary canines with the root canals instrumented were divided into four groups (n = 10) similar to the SEM analysis study. After the filling with AH Plus, the roots were transversally sectioned to obtain dentinal slices. The specimens were submitted to a push‐out bond strength test using an electromechanical testing machine. The statistical analysis for the SEM and push‐out bond strength studies were performed using the Kruskal–Wallis and Dunn tests (α = 5%). There was no difference among the G2, G3, and G4 efficacy in removing the debris and smear layer (P > 0.05). The efficacy of these groups was superior to the control group. The push‐out bond strength values of G2, G3, and G4 were superior to the control group. The ability to remove the debris and smear layer by SmearClear and QMiX was as effective as the 17% EDTA. The final rinse with these solutions promoted similar push‐out bond strength values. Microsc. Res. Tech. 76:533–537, 2013. © 2013 Wiley Periodicals, Inc.     

Post-embryonic development of the antennal sensilla in Melipona quadrifasciata anthidioides (Hymenoptera: Meliponini)

The sensilla are sensory organs formed by cuticular and cellular structures specialized in reception of chemical and physical stimuli from the environment and transmission to the insect's central nervous system. In function of the great concentration of sensilla, the antennae are the main organs for interaction between bees and with the environment. This work studied the presence of antennal sensilla in the different phases of pupal development of the stingless bee Melipona quadrifasciata anthidioides by means of scanning electron microscopy and light microscopy. The results showed that antennal sensilla begin their development in the transition of the prepupae to the white-eyed pupae and finish it in the pigmented-body pupae phase. The antennal sensilla were exposed to the environment in the black-eyed pupae when the old cuticle is completely digested, suggesting that only in the final pupal phases can these bees perceive the environmental stimuli.     

Investigating the thermal-plasma processing of advanced materials

Due to several inherent advantages, plasma processing technology may become a very useful tool in the production of new materials. An increasing research effort based on experimental as well as theoretical investigations has been invested in this area for the synthesis of advanced materials. In describing the thermal-plasma processing technique, this article employs examples from research at the Plasma Processing Laboratory at the University of Idaho.     

Evaluation of the interaction between sodium hypochlorite and several formulations containing chlorhexidine and its effect on the radicular dentin—SEM and push‐out bond strength analysis

The aim of the current study was to evaluate the presence of debris and smear layer after endodontic irrigation with different formulations of 2% chlorhexidine gluconate (CHX) and its effects on the push‐out bond strength of an epoxy‐based sealer on the radicular dentin. One hundred extracted human canines were prepared to F5 instrument and irrigated with 2.5% sodium hypochlorite and 17% ethylenediaminetetraacetic acid. Fifty teeth were divided into five groups (n = 10), according to the final irrigation protocol with different 2% CHX formulations: G1 (control, no final rinse irrigation), G2 (CHX solution), G3 (CHX gel), G4 (Concepsis), and G5 (CHX Plus). In sequence, the specimens were submitted to scanning electron microscopy (SEM) analysis, in the cervical‐medium and medium‐apical segments, to evaluate the presence of debris and smear layer. The other 50 teeth were treated equally to a SEM study, but with the root canals filled with an epoxy‐based endodontic sealer and submitted to a push‐out bond strength test, in the cervical, middle, and apical thirds. G2, G3, G4, and G5 provided higher precipitation of the debris and smear layer than G1 (P < 0.05), but these groups were similar to each other (P > 0.05), in both segments. The values obtained in the push out test did not differ between groups, independent of the radicular third (P > 0.05). The CHXs formulations caused precipitation of the debris and smear layer on the radicular dentin, but these residues did not interfere in the push‐out bond strength of the epoxy‐based sealer. Microsc. Res. Tech. 77:17–22, 2014. © 2013 Wiley Periodicals, Inc.     

Residues of different gel formulations on dentinal walls: A SEM/EDS analysis

The aim of this study was to evaluate the presence of residues of sodium hypochlorite gel, chlorhexidine gel, and EDTA gel on dentinal walls after canal preparation through chemical SEM‐ elemental chemical microanalysis (EDS) analysis. Forty‐eight single‐rooted teeth were selected. They had their crowns sectioned and were instrumented with a reciprocating system. The canals were irrigated with 5 mL of saline solution during root canal preparation. After instrumentation, the root canals were irrigated with 3 mL 17% EDTA followed by 1 min of ultrasonic passive activation (3× 20 sec) to remove the smear layer, and then irrigated with 3 mL of saline solution. The specimens were randomized into three groups (n = 12) according to the chemical substance that filled the root canal for 30 min: GI: 5.5% sodium hypochlorite gel; GII: 2% chlorhexidine gel; GIII: 24% EDTA gel; Negative control group: no substance was used. Then, the root canals were irrigated with 6 mL of saline solution followed by 1 min of ultrasonic passive activation (3× 20 sec). After ultrasonic activation, the canals were irrigated with 2 mL saline. The roots were sectioned, and the percentage of each chemical element present in the samples was analyzed through chemical SEM‐EDS microanalysis. All experimental groups showed a significantly higher percentage of chemical elements (Na and/or Cl) than the control group (P < 0.03). This in vitro study has shown that, regardless of chemical solutions used even after the final irrigation protocol, chemical residues of different substances remained attached to the root canal walls. Microsc. Res. Tech. 78:495–499, 2015. © 2015 Wiley Periodicals, Inc.     

The effectiveness of glass ionomer cement as a fiber post cementation system in endodontically treated teeth

This study compared the performance of a glass ionomer (GC Gold Label 1, GIC) as a fiber post cementation system for glass fiber posts with a self‐adhesive resin cement (Relyx U200, RUC) and a conventional resin cement system (Scotchbond Muli‐Purpose and Relyx ARC, RAC). Thirty endodontically treated canines were randomly divided in three groups (n = 10), according to the fiber post cementation system: (RAC)—Scotchbond Multi‐Purpose and Relyx X ARC; (RUC)—Relyx U200 and (GIC)—GC Gold Label 1 Luting & Lining. Rhodamine was incorporated into the cementation system prior to the fiber post cementation. After glass fiber post cementation, roots were incubated in artificial saliva for 6 months. After that, specimens from the cervical, middle, and apical thirds of the post space were prepared and analyzed using a push‐out bond strength test and confocal laser microscopy. ANOVA one way and Tukey tests showed that GIC and RUC demonstrated similar push‐out bond strength values, independently of the post space third (p > .05); however, values were greater than those shown by RAC (p < .05). For dentin penetrability, GIC and RUC also had similar results (p > 0.05) and lower than RAC (p < 0.05). Inside the root canal, the cementation system using glass ionomer cement (GC Gold Label 1 Luting & Lining) has similar push‐out bond strength to the self‐adhesive resin cement (Relyx U200) and these were higher than the conventional resin (Relyx ARC), despite its higher dentin penetrability.     

Determination of Primary Amine Content in Bonding Agent Used in Composite Solid Propellants

The primary amine content in tetraethylenepentamine (TEPA) and TEPAN, a bonding agent used in composite solid propellants, was determined by near infrared (NIR) spectroscopy and the results were compared to those obtained by potentiometry. The band at 4930 cm⁻¹, which showed to be influenced only by primary amine groups, was chosen as the analytical band. The calibration curves based on isopropylamine (IPA) and isopropylamine/dibutylamine (IPA/DBA) mixtures proved to be suitable for determining the NH₂ content of TEPA or of samples containing mixtures of NH and NH₂ groups. It was found that TEPA contains 26.4 % of NH₂ and 25.7 % of NH, and that TEPAN contains 0.5 % of NH₂, confirming the low content of primary amine of this bonding agent. The lowest amine equivalent of TEPA is 31.1±0.3 g/eq, as determined by potentiometry, was found because this technique measures the total hydrogen content, including primary and secondary amines. The literature value of 62.6 g/eq for TEPA ACROS obtained by potentiometry in a non aqueous medium and related to the first inflection of the primary amine, validates the value obtained by NIR in this work for a similar type of amine. The equivalent weight obtained by NIR spectroscopy (62.7 g/eq) allowed to calculate the molar mass of TEPA of 195.6 g mol⁻¹, which is close to the typical value of 200 g mol⁻¹.