Nanoliter-sized liquid dispenser array for multiple biochemical analysis in microfluidic devices

We have developed a microdispenser array made of PDMS, in which a number of nanoliter-sized droplets can be accurately dispensed and mixed with the aid of specific channels under pneumatic pressure. In this system, hydrophobic and narrow channels act as a kind of valve and help structural liquid manipulation. Also, by arranging multiple dispensers in parallel, a single injection of liquid becomes sufficient for the preparation of multiple nanoliter-sized aliquots for different reactions. We designed two kinds of microdevices for multiple liquid dispensing and mixing and evaluated their performance and reproducibility, proving them sufficient for quantitative reactions. As a practical application, biochemical analysis of glucose was performed using enzymatic reactions. This liquid dispensing technology can be widely applied in the field of microscale analysis due to its low consumption, small dead volume of reagents and samples, and ease of operation.     

Absorption phenomena in the treatment of cotton with formaldehyde and cyclic oxymethylenes

Monomeric formaldehyde and the cyclic oxymethylenes tetraoxane and pentaoxane were retained by cotton to similar extents at the high temperatures used in textile finishing, but the mechanisms of absorption appeared to differ. Trioxane, however, was not retained by cotton. The absorption of cyclic oxymethylenes did not seem to involve bonding to cellulose by primary valence bonds. The presence of other substances had a greater effect on the absorption of monomeric formaldehyde than of cyclic oxymethylenes, but changes in extent of absorption were not large enough to influence textile properties of treated fabric.     

Controlled release of biofunctional substances by radiation-induced polymerization: 1. Release of potassium chloride by polymerization of various vinyl monomers

The release behaviour of a drug from flat circular capsules obtained by radiation-induced polymerization at low temperatures and with different hydrophilic properties has been studied. The effect of various factors on release property was investigated. The release process could be divided into three parts, an initial quick release stage, stationary state release stage and a retarded release stage. Release behaviour in the stationary state was examined using Noyes-Whitney and Higuchi equations. It was shown that the hydrophilic property of polymer matrix expressed by water content was the most important effect on diffusion and release rate. Rigidity of the polymer may also affect diffusivity. The first quick release step could be attributed to rapid dissolution of drug in the matrix surface due to polymer swelling.     

Fourier synthesis image reconstruction by use of one-dimensional position-sensitive detectors

An improvement of Fourier synthesis optics for hard x-ray imaging is described, and the basic performance of the new optics is confirmed through numerical simulations. The original concept of the Fourier synthesis imager utilizes nonposition-sensitive hard x-ray detectors coupled to individual bigrid modulation collimators. The improved concept employs a one-dimensional position-sensitive detector (such as a CdTe strip detector) instead of the second grid layer of each bigrid modulation collimator. This improves the imaging performance in several respects over the original design. One performance improvement is a two-fold increase in the average transmission, from 1/4 to 1/2. The second merit is that both the sine and cosine components can be derived from a single grid-detector module, and hence the number of imaging modules can be halved. Furthermore, it provides information along the depth direction simultaneously. This in turn enables a three-dimensional imaging hard x-ray microscope for medical diagnostics, incorporating radioactive tracers. A conceptual design of such a microscope is presented, designed to provide a field of view of 4 mm and a spatial resolution of 400 microm.     

Efficient frequency doubling of 1-W continuous-wave Ti:sapphire laser with a robust high-finesse external cavity

We demonstrated an intrinsic conversion efficiency of 56% from the input fundamental power to the generated second-harmonic power. The second-harmonic power of 581 mW was obtained from the external cavity with a LiB3O5 crystal through the frequency doubling of a 1.17-W Ti:sapphire laser at 746 nm, when the finesse of the robust external cavity was 260.     

Shape space estimation by higher-rank of SOM

The aim of this study is to develop an estimation method for a shape space. In this work, “shape space” means a nonlinear subspace formed by a class of visual shapes, in which the continuous change in shapes is naturally represented. By using the shape space, various operations dealing with shapes, such as identification, classification, recognition, and interpolation can be carried out in the shape space. This paper introduces an algorithm based on a generative model of shapes. A higher-rank of the self-organizing map (SOM²) is used to implement the shape space estimation method. We use this method to estimate the shape space of artificial contours. In addition, we present results from a simulation of omnidirectional camera images taken from mobile robots. Our technique accurately predicts changes in image properties as the robot’s attitude changes. Finally, we consider the addition of local features to our method. We show that the inclusion of local features solves the correspondence problem. These results suggest the potential of our technique in the future.     

A large discrepancy between CPM and ESR defect densities in light-soaked a-Si:H

A large discrepancy between defect densities evaluated by constant photocurrent method (CPM) and electron spin resonance (ESR) is investigated for hydrogenated amorphous silicon (a-Si:H) with various thicknesses in the process of light soaking (LS). It is shown by a computer simulation that the inhomogeneous defect distribution across the film thickness caused by a rather small penetration depth of the white light in the thick film is one of the possible origins of the discrepancy. But various other causes should also bring about the discrepancy, and the problem is still a puzzling one.