A novel ferromagnetic thermo-stent for plaque stabilization that self-regulates the temperature

The purpose of this study is to investigate the vascular wall with a thermally self-regulating, cylindrical stent made of a low Curie temperature ferromagnetic alloy. Physiologic saline was circulated in the silicone model vessel implanted with the stent. The stent-temperature remained nearly constant for variable saline flows, saline temperatures, and magnetic flux densities. Stent implants of this type in human blood vessels could potentially enable thermotherapy and temperature determination without catheterization.     

Two-color photorefractive effect in Mg-doped lithium niobate

The two-color photorefractive response of near stoichiometric lithium niobate (SLN) doped with Mg above a critical threshold has been investigated. Striking differences as compared with non Mg-doped material were observed: The intermediate level in the two-color writing process has approximately a two orders of magnitude longer lifetime in SLN:Mg than in nominally undoped SLN, the grating is written in a shallower level but can be fixed via a simple thermal process and complementary electron-hole gratings are formed. It is proposed that the Fe impurity level moves from below the small-polaron level in nonMgO-doped material to above it, resulting in the increased lifetime of the small polaron. These changes are associated with a shift of the Fe from a Li site to a Nb site. The two-color sensitivity is higher than in the absence of MgO but the dynamic range is much lower.     

Study of a Helium Film in 10 μm Porous Glass by Torsional Oscillator in Free Decay Mode

Dissipation and superfluid density of a thin helium film (superfluid transition at temperature T_c=0.88 K), placed in 10 m porous glass are studied as a function of oscillation amplitude or AC amplitude at fixed temperatures near superfluid transition. The measurements are performed using a high-Q torsional oscillator in the free decay mode as well as constant drive mode. Results show decreasing superfluid density with increasing velocity and non-monotonic behavior of the dissipation in the film.     

Characterization of the microbial community in an anaerobic ammonium-oxidizing biofilm cultured on a nonwoven biomass carrier

The enrichment and characterization of anaerobic ammonium-oxidizing biofilm cultures are ongoing in our laboratories. Biomass, with a predominately red color, demonstrating simultaneous removal of ammonium and nitrite under autotrophic and anoxic conditions, which is characteristic of anaerobic ammonium-oxidizing planctomycetes, was enriched and maintained for an extended period on a polyester nonwoven carrier. To investigate the bacterial composition of the mature biofilm community, 16S rDNA sequences were amplified by PCR and comparative analyses using DNA databases were conducted. Only one sequence had a notable similarity (92.2%) to that of the first discovered anaerobic ammonium-oxidizing planctomycete and lesser, yet significant, similarities to the 16S rDNA sequences of other recently reported anaerobic ammonium-oxidizing strains. The newly discovered strain (designated KSU-1) reported here was dominant among detectable members of the biofilm community. By fluorescence imaging, KSU-1 was shown to form spherical clusters wrapped in a thin layer of Zoogloea sp. Possible interactions and interdependencies of these two species are discussed with regard to the putative unculturability of the anaerobic ammonium-oxidizing planctomycetes.     

Behaviour of chromium steels in liquid Pb-55.5Bi with changing oxygen content and temperature

The behaviour of protective oxide layers on P122 steel and its welds and of ODS steel in liquid Pb_44.5Bi_55.5 (LBE) is examined under conditions of changing temperatures and oxygen concentrations. P122 (12Cr) and its welded joints are exposed to LBE at 550 °C for 4000 h with oxygen concentrations of 10⁻⁶ and 10⁻⁸ wt% (p(O₂) = 8.1 × 10⁻²³ bar and 5.2 × 10⁻²⁷ bar) which change every 800 h. It is found that like in case of constant oxygen concentration of 10⁻⁶ wt% a protective spinel layer (Fe(Fe_1−xCr_x)₂O₄) was maintained on P122 and also on its welded joint. Two experiments with exposure times of 4800 h are conducted on ODS steel, both with temperatures changing from 550 to 650 °C and back every 800 h, one experiment with 10⁻⁶ the other with 10⁻⁸ wt% oxygen in LBE. Both experiments show strong local dissolution attack after 4800 h which is in agreement with the behaviour of ODS in LBE at a constant temperature of 650 °C. However, dissolution attack is less in LBE with 10⁻⁸ wt% oxygen (p(O₂) = 3.0 × 10⁻²⁵ bar).     

Numerical prediction of fraction of eutectic phase in Sn−Ag−Cu soldring using the phase-field method

A combination of macroscale solidification simulation and phase-field calculation is employed to predict the volume fraction of the eutectic phase in Sn-4.0 mass% Ag-XCu solder alloys (X=0.5–1.1 mass%). The solidification simulation incorporates the cooling rate in the phase-field simulation. We assume the residual liquid solidifies as eutectic phase when the driving force for the nucleation of Cu₆Sn₅ amounts to a critical value, which is determined based on the experimental data. Though the calculation results depend on the experimental data, the obtained fractions are about 40% for 0.5 mass% Cu and more than 90% for 1.1 mass% Cu alloy, which shows good agreement with the experimental data.     

Preparation of Lanthanum Nickel Oxide-Coated Ni Sheet Anodes and Their Application to Electrolytic Production of (CF3)3N in (CH3)4NF·4.0HF Melt

A new process for electrolytic production of a perfluorinated compound, (CF₃)₃N, using lanthanum nickel oxide-coated Ni sheet anode in the (CH₃)₄NF·4.0HF melt at room temperature, was developed. Thin films of the lanthanum nickel oxides were prepared on Ni sheets by sol-gel coating method using polyvinlylpyrrolidone(PVP). The main components of the thin films were La₂O₃, LaNiO₃, and La₂NiO₄ at 500, 750 and 1000 °C, respectively. The anode performance in the (CH₃)₄NF·4.0HF melt depends greatly on the main component of the thin film, and the LaNiO₃-coated Ni sheet anode gives the best anode performance. The potential of LaNiO₃-coated Ni sheet anode remains constant at 5.9 V during electrolysis at 20 mA·cm⁻² in the (CH₃)4NF·4.0HF melt for 100 h. This is because LaNiO₃ and NiF₃, and/or Ni₂F₅, the latter of which was formed during electrolysis, in the film give a high electronic conductivity to the surface film during electrolysis. The maximum mole fraction of (CF₃)₃N (21.4%) was obtained at 20 mA·cm⁻² in (CH₃)₄NF·4.0HF melt using the LaNiO₃-coated Ni sheet.     

Expression of DCC protein in colorectal tumors and its relationship to tumor progression and metastasis

The strains BALB/cHeA (BALB/c) and STS/A (STS) differ in production of IL-4 and IL-10, two Th2 cytokines, after stimulation of spleen cells with Concanavalin A, STS being a low and BALB/c a high producer. We analyzed the genetic basis of this strain difference using the recombinant congenic (RC) strains of the BALB/c-c-STS/Dem (CcS/Dem) series. This series comprises 20 homozygous strains. Each CcS/Dem strain contains a different, random set of approximately 12. 5% genes of the "donor" strain STS and approximately 87.5% of the "background" strain BALB/c. We selected for further analysis the RC strain production intermediate between BALB/c and STS. In (CcS-20xBALB/c)F2 hybrids we found that different loci control expression of IL-4 and IL-10. Cypr1 (cytokine production 1) on chromosome 16 near D16Mit15 controls IL-4 production, whereas the production of IL-10 is influenced by loci Cypr2 near D1Mit14 and D1Mit227 on chromosome 1 and Cypr3 marked by D5Mit20 on chromosome 5. In addition, the relationship between the level of these two cytokines depends on the genotype of the F2 hybrids at a locus cora1 (correlation 1) on chromosome 5. This differential genetic regulation may be relevant for the understanding of biological effects of T-helper cells in mice of different genotypes.     

Mobile catabolic genes in bacteria

The recent findings of various mobile catabolic genes have provided some insight into the evolution of microbial degradation systems for xenobiotic compounds. The catabolic genes undergo marked genetic rearrangements due to their presence on transposons or association with mobile genetic elements. Bacterial catabolic transposons fall into three defined structural classes. Class I elements include catabolic genes flanked by two copies of insertion sequences. Class II elements carry short terminal inverted repeats and transpose by the replicative mode in which transposase and resolvase are involved. Conjugative catabolic transposons represent the third class of mobile genetic elements. They carry all the genes required for excision, conjugal transfer to a new host, and integration. This review focuses on the structures, functions and roles of the recently characterized catabolic transposons in bacteria. Also described are the mobile catabolic elements that share structural similarity with the pathogenicity and symbiosis islands.     

Properties of the peptides liberated from rice protein in sokujo-moto

In the supernatant of sokujo-moto, a high level of acid carboxypeptidase (ACP) activity and a large amount of peptides were observed, however, the amount of free amino acids liberated was small. In order to determine why these peptides were not hydrolyzed to any significant degree by the ACP, the properties of the peptides in sokujo-moto were investigated in this study. Peptides were fractionated from sokujo-moto by ion exchange column chromatography. ACP purified from rice-koji (rice overgrown with Aspergillus oryzae) was allowed to react with the peptides, and it was found that they were not hydrolyzed to any significant degree by the enzyme. Gel filtration chromatography was performed to ascertain the molecular size distribution of the peptides in sokujo-moto, and it was revealed that they were of low molecular sizes; molecular size: mainly in the range of 200-400, and chain length: 2-3. ACP purified from rice-koji was also allowed to react with various synthetic peptides, and it was found that ACP of rice-koji could not rapidly hydrolyze low-molecular-size peptides, such as dipeptides or tripeptides. Acid protease (AP) purified from rice-koji released peptides of molecular sizes mainly in the range of 300-600 or above from rice protein under acidic conditions (pH 3.6; the pH of sokujomoto). When AP and ACP were allowed to act at the same time on rice protein, mainly low-molecular-size peptides (molecular sizes mainly in the range of 200-400) were produced. From these results, it was estimated that AP released peptides with molecular sizes mainly in the range of 300-600 or above from rice protein and ACP degraded the relatively higher molecular size peptides among them to lower molecular size peptides; consequently only low-molecular-size peptides with molecular sizes mainly in the range of 200-400 were released in the supernatant of sokujo-moto.