Mechanism of Mechanical Strength Increase of Soda–Lime Glass by Aging

Two models have been proposed to explain the mechanical strength increase of abraded or indented soda–lime glasses upon aging, namely, crack tip blunting and the release of residual tensile stress near the crack tip. To clarify the mechanism, the time dependence of the strengthening of an abraded soda–lime glass was investigated. Effects of aging media, such as moist air, distilled water, 1 N HCI and 1 N NaOH solutions, as well as the abrasion flaw depth, were determined. The strength increase rate in water of abraded soda–lime glass was compared with those of borosilicate and high-silica glasses. The effect of stressing during aging was also investigated. It was found that the rate of strength increase was faster with decreasing abrasion flaw depth and with decreasing chemical durability. For a given flaw depth, an acidic solution produced the fastest strengthening. The strengthening rate was found to accelerate because of the "coaxing'effect of stressing during aging. From these observations, it was concluded that the strengthening rates relate to the diffusion process and chemical reactions, especially the alkali–hydrogen (or hydronium) ion-exchange reaction, near the crack tip. The role of the residual tensile stress appears to be similar to that of the applied tensile stress, helping the diffusion process near the crack tip. The observed strength increase of soda–lime glass by aging was thus attributed to the effective blunting of the crack tip geometry by the glass–water reaction.     

Photoelastic confirmation of surface stress relaxation in silica glasses: Fiber bending and rod torsion

Silica glass samples were given various heat treatments under stress at low temperatures and subsequently their residual stress distributions in terms of retardance were observed using a polarized light microscope, confirming previously reported fast surface stress relaxation while providing more detailed characterization. Retardance profiles of silica glass fibers heat-treated under a constant bending strain in the presence of atmospheric water vapor were measured and fit to a previously developed diffusion-based relaxation model. The retardance of a cross-section of a silica glass rod heat-treated at 650°C in lab air under applied torsional shear strain was also measured to confirm the presence of residual surface shear stress which was predicted by the decrease of torque with time for the rod. Together, these results confirm the low-temperature fast surface stress relaxation which occurs when water vapor is present for both bending and shear stresses.     

Role of Al2O3 layer in oxidation resistance of Cu-Al dilute alloys pre-annealed in H2 atmospheres

Copper was alloyed with small amounts of Al (0.2, 0.5, 1.0 and 2.0 mass%) to improve the oxidation resistance. Copper (6 N) and the Cu-Al alloys were oxidized at 773-1173 K in 0.1 MPa oxygen atmosphere after hydrogen annealing at 873 K. Continuous very thin Al₂O₃ layers were formed on the surface of all Cu-Al dilute alloys during the hydrogen annealing. Oxidation resistance of Cu-Al alloys was improved especially for Cu-2.0Al at 773-973 K, while it decreases on increasing the oxidation temperature. Cu-Al alloys followed the parabolic rate law at 1173 K, but most of other cases do not at and below 1073 K. Oxidation resistance for Cu-Al alloys was found relevant to the maintenance of the thin Al₂O₃ layer at the Cu₂O/Cu-Al alloy interface.     

Determination of the extinction coefficient of weakly absorbing dielectrics in the near-ultraviolet region

A method is presented for obtaining the approximate values of the extinction coefficient of weakly absorbing dielectrics in the near-UV region. In the method we use only the transmittance data of a dielectric plate or film and do not need the dispersion data of the refractive index. The method was applied to the determination of the extinction coefficients of wrap films.     

Spectral transmittance of organic dye-doped glass films obtained by the solgel method

The spectral transmittance of colored glass films synthesized by the solgel method is presented. The film was formed on a glass slide by dipping it into an organic dye-doped solution and, thereafter, by putting it into a furnace for solidification. Three dyes, Methylene Blue, Eosin, and Uranine, were used that exhibit transparent blue, pink, and yellow colors, respectively, when they are dissolved in the starting solution. We clarify how the spectral transmittance of the films varies with the solidification temperature. The films doped with two of the three dyes that exhibit violet, orange, and green colors are also synthesized, and their transmittance is measured. Moreover, the chemical durability of the films and the transmittance change caused by aging and illumination are examined.     

A biped static balance control and torque pattern learning under unknown periodic external forces

This paper addresses a biped balancing task in which an unknown external force is exerted, using the so-called ‘ankle strategy’ model. When an external force is periodic, a human adaptively maintains the balance, next learns how much force should be produced at the ankle joint from its repeatability, and finally memorized it as a motion pattern. To acquire motion patterns with balancing, we propose a control and learning method: as the control method, we adopt ground reaction force feedback to cope with an uncertain external force, while, as the learning method, we introduce a motion pattern generator that memorizes the torque pattern of the ankle joint by use of Fourier series expansion. In this learning process, the period estimation of the external force is crucial; this estimation is achieved based on local autocorrelation of joint trajectories. Computer simulations and robot experiments show effective control and learning results with respect to unknown periodic external forces.