Cross-linked soy protein as material for biodegradable films: Synthesis, characterization and biodegradation

The modification of soy protein isolate (SPI) with different amounts of a naturally occurring cross-linking agent (genipin, Gen) and glycerol used as plasticizer was carried out in this work. The films yielded were cast from heated and alkaline aqueous solution of SPI, glycerol and Gen and then dried in an oven. Total soluble matter, water vapor permeability and mechanical properties were improved by adding small amounts of Gen. These properties were not significantly affected (P ? 0.05) by additions exceeding 2.5% (w/w of SPI). The opacity and cross-linking degree were linearly increased with the addition of Gen, whereas the swelling ratios in water were decreased. All the films were submitted to degradation under indoor soil burial conditions and the weight loss of the films was measured at different times. This study revealed that the film biodegradation time can be controlled or modified from at least 14 to 33 days. The tests performed showed the potential of Gen to improve the SPI film properties, in which the possibility of employing such new films as biodegradable food packaging was raised.     

Detection of deoxynivalenol in foods and indoor air using an array biosensor

Deoxynivalenol (DON), a mycotoxin produced by several Fusaruim species, is a worldwide contaminant of foods and feeds. Because of the potential dangers due to accidental or intentional contamination of foods with DON, there is a need to develop a rapid and highly sensitive method for easy identification and quantification of DON. In this study, we have developed and utilized a competitive immunoassay technique to detect DON in various food matrixes and indoor air samples using an array biosensor. A DON-biotin conjugate, immobilized on a NeutrAvidin-coated optical waveguide, competed with the DON in the sample for binding to fluorescently labeled DON monoclonal antibodies. To demonstrate a simple procedure amenable for on-site use, DON-spiked cornmeal, cornflakes, wheat, barley, and oats were extracted with methanol-water (3:1) and assayed without cleanup or preconcentration. The limits of detection ranged from 0.2 ng/mL in buffer to 50 ng/g in oats. The detection limit of DON spiked into an aqueous effluent from an air sampler was 4 ng/mL.     

Nitrogen removal in a small constructed wetland: an isotope mass balance approach

The nitrogen (N) removal potential of constructed wetlands is increasingly used to lower the N load from agricultural nonpoint sources to inland and coastal waters. To determine the removal efficiency and key factors limiting wetland N removal, N fluxes were studied in a small constructed wetland in Central Switzerland. With an isotope mass balance approach integrating the natural isotope signature of nitrate (NO3-, ammonium (NH4+), and particulate nitrogen (PN), the N transformations such as assimilation, mineralization, nitrification, and denitrification were quantified. On average, the wetland removed 45 g m(-2) yr(-1) N during the studied 2.5 years, corresponding to a removal efficiency of 27%. Denitrification contributed 94% to the N removal, while only 6% of the removed N accumulated in the sediments. Denitrification was most efficient during periods with an oxic water column overlying anoxic sediments, as NH4+ released during mineralization of sediment organic matter was completely nitrified and subsequently denitrified at the sediment-water interface. During water column anoxia, NH4+ accumulated in the water and fueled assimilation by duckweed and internal recycling. The NO3-N isotope signature in the wetland mainly reflected the mineralization of sediment organic matter and subsequent nitrification, while denitrification at the sediment-water interface produced no fractionation.     

The promise of a community-based approach to managing severe malnutrition: A case study from Ethiopia

BACKGROUND: Community-based therapeutic care (CTC) is a new strategy in the arsenal of techniques to manage complex nutritional emergencies in rural communities. The CTC approach uses a newly developed ready-to-use therapeutic food, Plumpynut, to rehabilitate severely malnourished children in their home communities. Emerging literature has suggested the CTC strategy yielded results that were superior to those of programs limited to therapeutic feeding centers, as measured by rates of coverage and numbers of children rehabilitated. OBJECTIVE: To compare the effectiveness of the CTC strategy in combination with conventional treatments for acute malnutrition. The expectation was that this program would support the growing consensus on the effectiveness of CTC strategies. METHODS: Data from monitoring the initial phase of program implementation were reviewed to ascertain program impact. The number of children participating and the outcome of their participation were assessed. RESULTS: Families became key participants in the rehabilitation of their children, and communities became strengthened through the mobilization of local networks and the improved knowledge base of local health workers. Recovery rates were comparable with international standards, and coverage far exceeded that of traditional center-based care. CONCLUSIONS: CTC is an important tool to effectively address nutritional emergencies and may be a valuable entry point for long-term development, since it fosters capacity building and improvement in local communities. CTC programs may eventually be viewed as the entry point for more sustained development-oriented interventions, thus helping make the transition from relief to development.     

Thermal, microstructural and textural characterisation of gelatinised corn, cassava and yam starch blends

The functional properties of mixtures of maize, cassava and yam starches and their relationships with microstructural characteristics were investigated. Experiments were performed following the simplex‐centroid design with internal points and restrictions (upper limit) for yam starch proportion. The statistical model used (Scheffé canonical equation) was a powerful tool to predict the pastes behaviour within the limits of the experimental area. Polynomials with second level interactions were applied to obtain the surface response. Viscoelastic attributes of mixtures differed from those of individual starches. As shown by differential scanning calorimetry and microscopical observations, physical properties of the mixtures depended on the type of networks obtained. These networks varied upon yam, corn and cassava starch proportions as each one has a particular characteristic: gelatinisation temperature, granule size, swelling capacity and amylose/amylopectin ratio among others.     

Quercetin properties as a functional ingredient in omega‐3 enriched fish gels fed to rats

Wistar rats were fed with surimi gels containing either sunflower oil, fish oil (ω3), and the same formulation additionally supplemented with 1.05 g kg⁻¹ quercetin (ω3‐Q). Antioxidant capacity was highest in gels with added quercetin when measured by the ferric‐reducing/antioxidant power (FRAP) method, but not by the 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) free radical assay. Lipid stability was not enhanced by quercetin since commercial fish oil already contains stabilizers. Quercetin modified neither rheological properties nor water‐holding capacity of the gels; however, it produced a large increase in yellowness (b*). Serum lipid profile of rats was not significantly different. Total serum antioxidant capacity by FRAP was significantly increased only in the ω3‐Q group. Plasma malondialdehyde was similar in the ω3 and ω3‐Q groups, indicating no prooxidative effect of quercetin in vivo. These results suggest that quercetin might be used as a food ingredient in fish gel to improve some nutritional properties of the gel. Copyright © 2005 Society of Chemical Industry     

Distribution of T-2 and HT-2 toxins in milling fractions of durum wheat

The effect of processing on mycotoxin content in milling fractions has been investigated in 10 samples of durum wheat contaminated with T-2 and HT-2 toxins at levels ranging from 97 to 5,954 μg/kg (sum of T-2 and HT-2 toxins). Either naturally contaminated samples or samples artificially inoculated with Fusarium sporotrichioides under field conditions were used. A method based on liquid chromatography-tandem mass spectrometry coupled with immunoaffinity column cleanup was validated in-house for the simultaneous analysis of both toxins in a variety of matrices, including uncleaned wheat, cleaned wheat, screenings, bran, red dog, fine middlings, and semolina. Mean recoveries from samples spiked with T-2 and HT-2 toxins at levels of 100 μg/kg ranged from 85 to 107%, with relative standard deviations (RSDs) lower than 14%. The milling process led to an increase of T-2 and HT-2 toxin contents up to 13- and 5-fold in screenings and bran, respectively, compared with occurrence in the uncleaned wheat; however, an overall reduction of T-2 and HT-2 toxins by 54% (RSD, 20%) and 89% (RSD, 3%) was observed in cleaned wheat and in semolina, respectively.     

Modelling of mass transfer and texture evaluation during osmotic dehydration of melon under vacuum

The influence of vacuum time and solution concentration on mass transfer and mechanical properties of osmodehydrated melon cubes has been studied. Pulsed vacuum osmotic dehydration (PVOD) was carried out at 30 °C for 4 h, using sucrose solutions (40, 50 or 60°Brix) and applying a vacuum pulse (100 mbar for 5, 10 or 15 min). Kinetics of water loss, solid gain and stress at rupture were analysed, as well as effective diffusivities using the hydrodynamic model. The increase in solution concentration favoured water removal, but no significant effect of vacuum time was observed. The use of less concentrated solutions coupled to the action of vacuum pulse resulted in greater solid uptake. Samples subjected to PVOD using 60°Brix sucrose solution presented greater water loss, lower sugar uptake and better maintenance of fresh fruit texture throughout the process. Diffusion coefficients estimated by the hydrodynamic model showed a good fit to the experimental data.