Hydrodynamic and heat transfer properties of magnetic fluid in porous medium considering nanoparticle shapes and magnetic field-dependent viscosity

The purpose of this paper is to study the characteristics of the combined convection heat transfer and a micropolar nanofluid flow passing through an impermeable stretching sheet in a porous medium. The nanofluid flow field is affected by a magnetic field perpendicular to the sheet. The dynamic viscosity of the micropolar nanofluid changes under the influence of the magnetic field. The continuity, linear momentum, angular momentum, and energy equations are first simplified using the order of magnitude technique that, along with the applied boundary conditions and the definition of the appropriate parameters, are transferred to the similarity space using the similarity analysis. Then the resulting equations are solved using the Runge–Kutta method.The distinction of the macroscale and microscale flow fields and temperature fields resulting from different nanoparticle shapes was clarified. Increasing the Hartmann number, the vortex viscosity parameter, the magnetic parameter, the nanoparticle volume fraction, and the permeability parameter of the porous media increased the surface friction on the sheet. Increasing the vortex viscosity parameter, the magnetic parameter, and the volume fraction of the nanoparticles increases the Nusselt number.     

CFD study of non-premixed swirling burners: Effect of turbulence models

This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion.     

Effects of porous material on transient natural convection heat transfer of nano-fluids inside a triangular chamber

This study numerically investigates the impact of porous materials, nano-particle types, and their concentrations on transient natural convection heat transfer of nano-fluid inside a porous chamber with a triangular section. The governing equations of the two-phase mixture model are separated on the computational domain and solved using the Finite Volume Method, taking into account the Darcy–Brinkman model for porous medium. It was observed that convection heat transfer inside the triangular chamber consists of three stages named initial, transient, and semi-steady. The features of each step are provided in detail. The results suggested that the use of a hybrid nano-fluid(water/aluminum oxide-cooper) inside a porous glass material and an increase in volume fraction of nano-particles have adverse effects on heat transfer rate. In contrast, as the nano-particle volume fraction of the single nano-fluid(water/aluminum oxide) inside the chamber increased, convection heat transfer rate improved. At the same time, it was observed that the use of both nano-fluids(single and hybrid) in the porous environment of the aluminum foam could improve convection.     

Evaluation of Fracture Mechanisms in Al-Si Metal Matrix Nanocomposites Produced by Three Methods of Gravity Sand Casting,Squeeze Casting and Compo Casting in Semi-Solid State

Silicon - Magnetic stirring is considered to be the most useful stirring method in semi-solid casting processes which doesn’t have the restrictions of the mechanical stirring. In this...     

Flame synthesis of carbon nanofibers on carbon paper: Physicochemical characterization and application as catalyst support for methanol oxidation

We developed a simple, rapid and highly efficient flame synthesis method for direct growing carbon nanofibers (CNFs) on carbon paper (CP) using a common laboratory ethanol flame as both heat and carbon sources. High density CNFs with tangled solid-cored structure were uniformly formed over the Ni-plated CP surface in ∼20 s. The morphologies of the CNFs were characterized by scanning electron microscopy and transmission electron microscopy. X-ray diffraction study revealed the graphitic nature of the CNFs. Raman spectroscopy analysis confirmed that the CNFs are disordered graphitic nanocrystallites with high degree of exposed edges. Electrochemical impedance spectroscopy and cyclic voltammetry were used to show that growing CNFs directly on CP facilitates electron transfer with concomitant increase in double-layer capacitance. The CNF/CP was used as support for Pt nanoparticles to study their supporting effect on the catalyst performance. The as prepared Pt/CNF electrocatalyst exhibited much improved electrocatalytic activity for methanol oxidation compared to Pt/CP and commercial Pt/C on CP. High electronic conductivity and improved electrochemical behavior of the CNF/CPs, resulted from direct contact of the nanofibers with CP, combined with unique properties of CNFs, make the synthesized CNF/CPs promising for fuel cell applications.     

Nonisothermal suspension polymerization of vinyl chloride for enhanced productivity

In the present study, a mathematical model is developed to numerically predict nonisothermal batch suspension polymerization of vinyl chloride. Free volume theory was used to consider diffusion‐controlled reactions. Model predictions were validated against field data obtained in a pilot scale stirred tank reactor. Variable temperature trajectory was considered during the course of the reaction to improve productivity by reducing the polymerization time for a certain conversion. Variable temperature during the course of the polymerization was successfully implemented by considering the predefined K value. By using variable temperatures during the course of the reaction, the density of the short branches per 1,000 monomer units as a criterion for structure defect remained relatively unchanged. Maximum reduction in reaction time relative to the isothermal case with the same K value and final conversion was 44% for the best temperature trajectory. J. VINYL ADDIT. TECHNOL., 22:470–478, 2016. © 2015 Society of Plastics Engineers     

Modelling qualitative and quantitative parameters of groundwater using a new wavelet conjunction heuristic method: wavelet extreme learning machine versus wavelet neural networks

In recent years, as a result of climate change as well as rainfall reduction in arid and semi‐arid regions, modelling qualitative and quantitative parameters belonging to aquifers has become crucially important. In Iran, as aquifers are treated as the most commonly used drinking water resources, modelling their qualitative and quantitative parameters is enormously important. In this paper, for the first time, values of salinity, total dissolved solids (TDS), groundwater level (GWL) and electrical conductivity (EC) of the Arak Plain, located in Markazi Province, Iran, are simulated by means of four modern artificial intelligence models including extreme learning machine (ELM), wavelet extreme learning machine (WELM), online sequential extreme learning machine (OSELM) and wavelet online sequential extreme learning machine (WOSELM) as well as the MODFLOW software for a 15‐year period monthly. To develop the hybrid artificial intelligence models, the wavelet is employed. First, the effective lags in estimating the qualitative and quantitative parameters of the groundwater are identified using the autocorrelation function (ACF) and the partial autocorrelation function (PACF) analysis. After that, four different models are developed by the selected input combinations and also the ACF and the PACF in the form of different lags for each of ELM, WAELM, OSELM and WOSELM methods. Then, the superior models in simulating the groundwater qualitative and qualitative parameters are detected by conducting a sensitivity analysis. To forecast the electrical conductivity (EC) by the best WOSELM model, the values of the Nash–Sutcliffe efficiency coefficient (NSC), Mean Absolute Error (MAE) and the scatter index (SI) are obtained to be 0.991, 18.005 and 4.28E‐03, respectively. In addition, the most effective lags in estimating these parameters are introduced. Subsequently, the results found by the MODFLOW model are compared with those of the artificial intelligence models and it is concluded that the latter are more accurate. For instance, the scatter index and Nash–Sutcliffe efficiency coefficient values calculated by WOSELM for TDS, respectively, are 5.34E‐03 and 0.991. Finally, an uncertainty analysis is conducted to evaluate the performance of different numerical models. For example, MODFLOW has an underestimated performance in simulating the salinity parameter.     

Effect of age and dietary fat (fish,corn and coconut oils) on tocopherol status of C57BL/6Nia mice

The effect of age and dietary fat type on tocopherol status was investigated using young and old C57BL/6Nia mice fed semipurified diets containing 5% (by weight) fish, corn or coconut oils and supplemented with 30, 100 or 500 ppm dl-α-tocopheryl acetate for 6 wk. Tocopherol levels in the diets, plasma, liver, kidney and lung were measured by high performance liquid chromatography following appropriate extractions. The results indicate that mice fed fish oil maintain lower plasma and tissue tocopherol concentrations than those fed corn and cononut oils (fish<corn oil<coconut oil). The difference was not due to a loss of tocopherol prior to consumption, but rather appeared to occur during the absorption process. Old mice had lower plasma and liver tocopherol concentrations than young mice. Old mice fed fish oil, however, maintained plasma tocopherol levels better than young mice fed fish oil, presumably due to their larger tocopherol pool. No age effect was detected on kidney and lung tocopherol levels. It is concluded that tocopherol status is affected by age and dietary fat type, especially fish oil.     

An improved mechanism for capacity payment based on system dynamics modeling for investment planning in competitive electricity environment

Many countries have experienced restructuring in their electric utilities. This restructuring has presented the power industries with new challenges, the most important of which is long-term investment planning under uncertain conditions. This paper presents an improved mechanism for capacity payment. The mechanism has been investigated based on system dynamic modeling. In our proposed mechanism, generators will recover a part of their investment through capacity payment. While the payment for any plant remains constant during the operation period, it depends on the investment needed to build it. The main factors affecting long-term planning have been considered in our model. The approach can be used to investigate the effects of fixed as well as variable capacity payment in market investment. We used the probability density function of load as a new concept to calculate average market price. Delays in unit constructions, estimation of demand, and market capacity growth during construction periods have been included in the proposed algorithm as parameters, which affect the regulator's decision for changing capacity payment. The model can be used by regulators to investigate strategies that may affect the fluctuations in the market.     

Analytical solution for transient temperature and thermal stresses within convective multilayer disks with time-dependent internal heat generation,Part II: Applications

This work investigates the analytical solution for transient temperature and thermal stresses within three circular geometries. First, the transient temperature and thermal stresses within a composite disk are addressed. Then, two examples regarding transient temperature and thermal stresses throughout circular heaters are analyzed. Pulsed and sinusoidal internal heat generations are incorporated into the second and third examples, respectively. For the composite hollow-disk example, merely the separation of variables method (SVM) is used to overcome the energy partial differential equation. For the other two examples, the combination of the SVM and Duhamel's theorem are adopted to solve the partial differential equations. Accordingly, assuming plane stress formulation, the transient thermal stresses within structures are obtained.