Analytical I–E response for several multistep potential techniques applied to an electrocatalytic process at mediator modified electrodes

General analytical and explicit equations for the transient and stationary I–E responses of electrocatalytic process of soluble solution species at mediator modified electrodes, valid for any reversibility degree of the charge transfer and for any multipotential pulse technique, are presented. These expressions have been applied to staircase voltammetry (SCV) and linear sweep voltammetry (LSV), and also to their corresponding differential and derivative modalities. The value of the chemical rate constant can be easily obtained from a cathodic plateau of the SCV curves under transient and stationary conditions. Easy methods for determining other characteristic parameters of the process are proposed. The theoretical predictions have been experimentally tested.     

Guanidinium-based potentiometric SO2 gas sensor

An SO2 gas sensor was developed by using a hydrogen sulfite-selective electrode positioned behind a gas-permeable membrane (GPM). The hydrogen sulfite-selective electrode was prepared by incorporating a multicyclic guanidinium ionophore in a plasticized poly(vinyl chloride) membrane. This gas sensor presents important advantages over the conventional Severinghaus-type SO2 gas sensor that contains a pH electrode immersed in an internal solution behind the GPM. The Severinghaus gas sensor suffers interferences from weak acids that can cross the GPM as gases and change the pH of the internal solution. In contrast, in the proposed sensor, the excellent selectivity of the HSO3- electrode and the ability of the GPM to discriminate gaseous from nongaseous species combine to generate the most selective potentiometric SO2 gas sensor reported to date.     

Cerebrospinal fluid selenium and chromium levels in patients with Parkinson's disease

We compared CSF and serum levels of selenium and chromium, measured by atomic absorption spectrophotometry, in 28 patients with Parkinson's disease (PD) and 43 matched controls. The CSF and serum levels of these trace metals did not differ significantly between PD patients and controls. CSF selenium and chromium levels were not correlated with age, age at onset, duration of the disease, scores of the Unified Parkinson Disease Rating Scale of the Hoehn and Yahr staging in the PD group. Although antiparkinsonian therapy did not influence significantly the CSF levels of selenium, PD patients not treated with levodopa had significantly higher CSF selenium levels than controls (p < 0.01). It is possible that increased CSF selenium levels could indicate an attempt of protection against oxidative stress. The normality of CSF and serum chromium levels suggest that these values are not related with the risk for PD.     

Computerized tomographic assessment of the composition of gallstones

We present the results of an in vitro study of biliary lithiasis (n = 106) with computerized tomography (CT). We analyzed the correlation between composition of gallstones (crystallographic analysis of thin sections and atomic absorption spectrophotometric analysis of total calcium content) with CT patterns (densitometry) and their corresponding attenuations. Six main CT patterns were distinguished: hypodense (homogeneous and heterogeneous), dense, homogeneous hyperdense, ringed hyperdense and irregular hyperdense. Statistically significant differences (p < 0.05) were found between attenuations for cholesterol (mixed and pure) and pigmentary stones. We found a good inverse correlation between attenuations and cholesterol content; the contents of pigment, inorganic calcic salts and total calcium content also showed significant direct correlations (p < or = 0.01). Of the samples classified as pure cholesterol type stones, 86.4% showed hypodense patterns, and the remaining 13.6% showed irregular hyperdense patterns. Of the pigmentary stones, 80% showed homogeneous hyperdense images. All stones that contained more than 3% calcium produced hyperdense patterns, whereas 72.4% of the stones that contained less calcium produced hypodense images. Tomodensitometric measurements provided more information than simple radiography, and made it possible to distinguish a greater variety of gallstone types based on structural complexity.     

一所大学建筑中用高效率的照明合理使用电能

0 引言 为了在用能效率上作出工程努力,Cortagena技术大学去年4月已决定实施一项雄心勃勃的计划,要在此后的4年中削减用电费用。为了证实不同政策的可行性和成本效益,应用于原海军医院(工业工程高等技术学校总部)的许多展示活动将在最近期内完成。当然,在此建筑中合理用电的对象将集中在两个主要的电气末端即:电     

Effect on the journal impact factor of the number and document type of citing records: a wide-scale study

We studied the effect on journal impact factors (JIF) of citations from documents labeled as articles and reviews (usually peer reviewed) versus citations coming from other documents. In addition, we studied the effect on JIF of the number of citing records. This number is usually different from the number of citations. We selected a set of 700 journals indexed in the SCI section of JCR that receive a low number of citations. The reason for this choice is that in these instances some citations may have a greater impact on the JIF than in more highly-cited journals. After excluding some journals for different reasons, our sample consisted of 674 journals. We obtained data on citations that contributed to the JIF for the years 1998?C2006. In general, we found that most journals obtained citations that contribute to the impact factor from documents labeled as articles and reviews. In addition, in most of journals the ratio between citations that contributed to the impact factor and citing records was greater than 80% in all years. Thus, in general, we did not find evidence that citations that contributed to the impact factor were dependent on non-peer reviewed documents or only a few citing records.     

Photosensitized degradation in water of the phenolic pesticides bromoxynil and dichlorophen in the presence of riboflavin, as a model of their natural photodecomposition in the environment

Within the context of environmentally friendly methods for the elimination of surface-water pollutants, the photodegradation of the phenolic pesticides bromoxynil (BXN) and dichlorophen (DCP) under simulated natural conditions has been studied. The work was done in the presence of the visible-light absorber photosensitizer riboflavin (Rf), usually present in trace quantities in natural waters. Under aerobic conditions, an efficient photooxidation of both pesticides was observed. The relatively intricate photochemical mechanism involves pesticide and oxygen consumption and, to a lesser extent, Rf degradation. The kinetic and mechanistic study supports that both H(2)O(2) and singlet molecular oxygen, O(2)((1)Δ(g)), are involved in the process. Kinetic data for the O(2)((1)Δ(g))-mediated oxidation indicate that BXN and DCP are photodegraded with this species faster than the parent compound phenol, very frequently employed as a model for aquatic contaminants, likely due to their lower pK(a) values. This observation allows the design of phenolic pesticides with different photodegradation rates under environmental conditions.     

HWCVD MoO3 nanoparticles and a-Si for next generation Li-ion anodes

We have employed hot wire chemical vapor deposition (HWCVD) for the generation of MoO₃ nanostructures at high density. Furthermore, the morphology of the nanoparticles is easily tailored by altering the HWCVD synthesis conditions. The MoO₃ nanoparticles have been demonstrated as high-capacity Li-ion battery anodes for next-generation electric vehicles. Specifically, the MoO₃ anodes have been shown to have approximately three times the Li-ion capacity of commercially employed graphite anodes in thick electrodes suitable for vehicular applications. However because the materials are high volume expansion materials (≥ 100%), conformal Al₂O₃ coatings deposited with atomic layer deposition (ALD) were required before high rate capability was demonstrated. Recently, NREL is exploring high capacity Si anode materials that have a volume expansion of ~ 400%. It is assumed that new ALD coatings will need to be developed in order to stabilize Si as an anode material. Silicon is a superior choice for an anode material to the metal oxide structures due to both a higher capacity and a significantly lower hysteresis in the voltage vs. Li/Li⁺ for the charge/discharge profiles.