Psychosocial aspects of children and families treated with hemodialysis

Introduction: The aim of this study was to analyze the selected psychosocial aspects of chronic kidney disease in children treated with hemodialysis (HD). Methods: The study included 25 children treated with HD aged 2 to 18 years and their parents. Data concerning the illness and socio‐demographic parameters was collected. We used the Paediatric Quality of Life Inventory (PedsQL) for patients and for their parents the PedsQL‐proxy version, General Health Questionnaire (GHQ‐12), Berlin Social Support Scales (BSSS), and the Caregivers Burden Scale (CBS) to evaluate health‐related quality of life (QoL) of HD children and their primary caregivers. Findings: In the PedsQL test, the QoL of HD children was lower than in healthy children. Children treated with HD assessed their QoL on the PedsQL questionnaire higher than the primary caregivers, on all subscales as well as an overall health‐related QoL. Scoring below 2 on the GHQ‐12 test was reported in 56% of mothers, which may indicate that psychological symptoms have intensified. There was no correlation between BSSS, CBS, and GHQ‐12. Discussion: The assessment of QoL in pediatric patients would allow for the earliest possible identification of their nonsomatic problems and irregularities. This could, consequently, contribute to improving QoL in both children with chronic kidney disease and their families.     

Efficacy of biogenic silver nanoparticles against clinical isolates of fungi causing mycotic keratitis in humans

Mycotic keratitis is mainly responsible for vision loss caused by various fungi. Sometimes, proper treatment of such infection is not possible due to unavailability of effective antifungal agents and development of resistance of such fungi to antimycotic drugs. Hence, it is necessary to search for potential antifungal agents, which can effectively eradicate fungal infection of eyes. Nanoparticles‐based antifungal drugs overcome this problem by increasing permeability and properties of drug molecules. In the present study, silver nanoparticles were synthesised by using Helminthosporium sp. and Chaetomium sp. following sequential reduction technique. The synthesised silver nanoparticles were detected primarily by UV‐visible spectrophotometer showing absorption spectra at 424 and 433 nm, respectively. Nanoparticles tracking analysis confirmed the mean particle size of silver nanoparticles as 45 and 55 nm. The synthesised AgNPs showed significant antifungal activity against fungi causing mycotic keratitis, when used alone and in combination with ketoconazole and amphotericin B in the range of 30–70 microgram per millilitre of minimum inhibitory concentration. Thus, the synthesised AgNPs can be used to enhance the activities of ketoconazole and amphotericin B.Inspec keywords: silver, nanoparticles, nanomedicine, antibacterial activity, diseases, permeability, ultraviolet spectra, visible spectra, particle sizeOther keywords: biogenic silver nanoparticles, fungi, mycotitic keratitis, vision loss, infection, antifungal agents, antimycotic drugs, antifungal drugs, permeability, Helminthosporium sp, Chaetomium sp, sequential reduction technique, UV‐visible spectrophotometer, mean particle size, ketoconazole, amphotericin B, wavelength 424 nm, wavelength 433 nm, size 45 nm, size 55 nm, Ag     

Effect of enzymatic degradation of chitosan in polyhydroxybutyrate/chitosan/calcium phosphate composites on in vitro osteoblast response

Polyhydroxybutyrate/chitosan/calcium phosphate composites are interesting biomaterials for utilization in regenerative medicine and they may by applied in reconstruction of deeper subchondral defects. Insufficient informations were found in recent papers about the influence of lysozyme degradation of chitosan in calcium phosphate/chitosan based composites on in vitro cytotoxicity and proliferation activity of osteoblasts. The effect of enzymatic chitosan degradation on osteoblasts proliferation was studied on composite films in which the porosity of origin 3D scaffolds was eliminated and the surface texture was modified. The significantly enhanced proliferation activity with faster population growth of osteoblasts were found on enzymatically degraded biopolymer composite films with α-tricalcium phosphate and nanohydroxyapatite. No cytotoxicity of composite films prepared from lysozyme degraded scaffolds containing a large fraction of low molecular weight chitosans (LMWC), was revealed after 10 days of cultivation. Contrary to above in the higher cytotoxicity origin untreated nanohydroxyapatite films and porous composite scaffolds. The results showed that the synergistic effect of surface distribution, morphology of nanohydroxyapatite particles, microtopography and the presence of LMWC due to chitosan degradation in composite films were responsible for compensation of the cytotoxicity of nanohydroxyapatite composite films or porous composite scaffolds.     

Deformation of Mesoporous Titania Nanostructures in Contact with D2O Vapor

For many applications, mesoporous titania nanostructures are exposed to water or need to be backfilled via infiltration with an aqueous solution, which can cause deformations of the nanostructure by capillary forces. In this work, the degree of deformation caused by water infiltration in two types of mesoporous, nanostructured titania films exposed to water vapor is compared. The different types of nanostructured titania films are prepared via a polymer template assisted sol–gel synthesis in conjunction with a polymer‐template removal at high‐temperatures under ambient conditions versus nitrogen atmosphere. Information about surface and inner morphology is extracted by scanning electron microscopy and grazing incidence small‐angle neutron scattering (GISANS) measurements, respectively. Furthermore, complementary information on thin film composition and porosity are probed via X‐ray reflectivity. The backfilling induced deformation of near surface structures and structures inside the mesoporous titania films is determined by GISANS before and after D₂O infiltration. The respective atmosphere used for template removal influences the details of the titania nanostructure and strongly impacts the degree of water induced deformation. Drying of the films shows reversibility of the deformation.     

Modelling the three-dimensional elastic constants of parallel-fibred and lamellar bone

The complex hierarchical structure of lamellar bone makes understanding structure–mechanical function relations, very difficult. We approach the problem by first using the relatively simple structure of parallel-fibred bone to construct a mathematical model for calculating Young's moduli in three-dimensions. Parallel-fibred bone is composed essentially of arrays of mineralized collagen fibrils, which are also the basic structural motif of the individual lamellae of lamellar bone. Parallel-fibred bone structure has orthotropic symmetry. As the sizes and shapes of crystals in bone are not well known, the model is also used to compare the cases of platelet-, ribbon- and sheet-reinforced composites. The far more complicated rotated plywood structure of lamellar bone results in the loss of the orthotropic symmetry of individual lamellae. The mathematical model used circumvents this problem by sub-dividing the lamellar unit into a thin lamella, thick lamella, transition zone between them, and the recently observed back-flip lamella. Each of these is regarded as having orthotropic symmetry. After the calculation of their Young's moduli they are rotated in space in accordance with the rotated plywood model, and then the segments are combined to present the overall modulus values in three-dimensions. The calculated trends compare well with the trends in microhardness values measured for circumferential lamellar bone. Microhardness values are, as yet, the only measurements available for direct comparison. Although the model is not directly applicable to osteonal bone, which is composed of many hollow cylinders of lamellar bone, the range of calculated modulus values and the trends observed for off-axis calculations, compare well with measured values. © 1998 Chapman & Hall     

Optical computing: introduction by the feature editors

This feature issue of Applied Optics: Information Processing contains 19 papers on Optical Computing. Many of these papers are expanded versions of presentations given at the Optical Society of America's Sixth Topical Meeting on Optical Computing held in Salt Lake City, Utah, in March 1995. This introduction provides a brief historical account of the series of optical computing meetings and a brief review of the papers contained in this special issue.     

Photorefractive processing for large adaptive phased arrays

An adaptive null-steering phased-array optical processor that utilizes a photorefractive crystal to time integrate the adaptive weights and null out correlated jammers is described. This is a beam-steering processor in which the temporal waveform of the desired signal is known but the look direction is not. The processor computes the angle(s) of arrival of the desired signal and steers the array to look in that direction while rotating the nulls of the antenna pattern toward any narrow-band jammers that may be present. We have experimentally demonstrated a simplified version of this adaptive phased-array-radar processor that nulls out the narrow-band jammers by using feedback-correlation detection. In this processor it is assumed that we know a priori only that the signal is broadband and the jammers are narrow band. These are examples of a class of optical processors that use the angular selectivity of volume holograms to form the nulls and look directions in an adaptive phased-array-radar pattern and thereby to harness the computational abilities of three-dimensional parallelism in the volume of photorefractive crystals. The development of this processing in volume holographic system has led to a new algorithm for phased-array-radar processing that uses fewer tapped-delay lines than does the classic time-domain beam former. The optical implementation of the new algorithm has the further advantage of utilization of a single photorefractive crystal to implement as many as a million adaptive weights, allowing the radar system to scale to large size with no increase in processing hardware.     

Effect of physical vapor deposition metallic thin films on micro injection molded weld line mechanical properties

Micro injection molded polymeric parts coated with functional thin films/layers show off the promising applications in microsystems area. But the unfavorable and unavoidable defect of weld line in micro injection molding part leads to detrimental mechanical and surface properties. The possibility of the functional thin film for enhancing micro injection molded weld lines was investigated. Two typical coating materials (aluminum and titanium) with various film thicknesses (400, 600, 800 nm) were deposited on one side of the micro injection molded weld line tensile sample via physical vapor deposition (PVD) method. The coated micro weld line samples were characterized by tensile tests. The results show that PVD films of aluminum and titanium can reinforce the strength and stiffness of micro injection molded weld line, even at thin thickness levels. But when the film thickness is increasing, the weaker adhesion between metallic films and polymers decreased the PVD films’ enhancing performance for micro weld line mechanical properties due to the degradation of polymers related to longer time exposure under high temperature.