Amino acid supplementation of calf milk replacers containing plasma protein

We determined the effects of calf milk replacers containing 0, 5, or 10% bovine plasma protein (PP), either without or with the supplemental amino acids (AA) Ile and Thr, on growth and health of male Holstein calves (n = 104) for 56 d. Milk replacers were formulated to contain 22% crude protein (CP), 20% fat, and 2.0% Lys. Milk replacers (12.5% solids) were fed at a rate of 1.5% of body weight (BW) on a dry matter basis during wk 1 and 1.75% of BW beginning on d 8. Starter was introduced on d 36 so that effects of PP and AA balance in milk replacers could be isolated. Intake, respiratory scores, and fecal scores were measured daily. Body weight and stature were measured weekly and blood serum samples were obtained during wk 4. Treatments had no effects on intakes of dry matter, CP, or metabolizable energy. During wk 6 and 8, BW was less as PP inclusion increased without AA supplementation compared with the other treatments. In wk 7, calves fed the higher level of PP without AA had lower BW than calves fed either the lower level of PP without supplemented AA or the higher inclusion of PP with supplemented AA. Average daily gain and gain:feed were lowest for calves fed the higher inclusion of PP without supplemented AA; heart girth in wk 7 was smallest for those calves. During the first 21 d, occurrence of scours was greater in calves fed the control milk replacer than in calves fed milk replacers containing the higher inclusion of PP either without or with supplemental AA. Occurrence of scours was also greater for the lower inclusion of PP compared with the higher inclusion of PP when AA were supplemented. Throughout the 56-d experiment, the chance of antibiotic treatment was greater for calves fed the control milk replacer than for all other treatments except the higher inclusion of PP without supplemental AA. Additionally, chance of antibiotic treatment was greater for the higher inclusion of PP without supplemental AA than for other milk replacers with PP. Calves fed treatments with the higher inclusion of PP had fewer days of scours than the controls. All milk replacers with PP, except the milk replacer containing higher PP without supplemental AA, had fewer days of treatment with antibiotics compared to the all-milk control. Inclusion of PP provided similar performance and improved health as long as milk replacers were balanced for Ile and Thr.     

Evaluation of factors associated with immunoglobulin G,fat, protein,and lactose concentrations in bovine colostrum and colostrum management practices in grassland-based dairy systems in Northern Ireland

The objectives of this study were to investigate colostrum feeding practices and colostrum quality on commercial grassland-based dairy farms, and to identify factors associated with colostrum quality that could help inform the development of colostrum management protocols. Over 1 yr, background information associated with dairy calvings and colostrum management practices were recorded on 21 commercial dairy farms. Colostrum samples (n = 1,239) were analyzed for fat, protein, lactose, and IgG concentration. A subset was analyzed for somatic cell count and total viable bacteria count. Factors associated with nutritional and IgG concentrations were determined using both univariate and multivariate models. This study found that 51% of calves were administered their first feed of colostrum via esophageal tube, and the majority of calves (80%) were fed >2 L of colostrum at their first feed (mean = 2.9 L, SD = 0.79), at a mean time of 3.2 h (SD 4.36) after birth, but this ranged across farms. The mean colostral fat, protein, and lactose percentages and IgG concentrations were 6.4%, 14%, 2.7%, and 55 mg/mL, respectively. The mean somatic cell count and total viable count were 6.3 log₁₀ and 6.1 log₁₀, respectively. Overall, 44% of colostrum samples contained <50 mg/mL IgG, and almost 81% were in excess of industry guidelines (<100,000 cfu/mL) for bacterial contamination. In the multivariate model, IgG concentration was associated with parity and time from parturition to colostrum collection. The nutritional properties of colostrum were associated with parity, prepartum vaccination, season of calving, and dry cow nutrition. The large variation in colostrum quality found in the current study highlights the importance of routine colostrum testing, and now that factors associated with lower-quality colostrum on grassland-based dairy farms have been identified, producers and advisers are better informed and able to develop risk-based colostrum management protocols.     

Hydrologic scaling for hydrogeomorphic floodplain mapping: Insights into human‐induced floodplain disconnectivity

Hydrogeomorphic approaches for floodplain modelling are valuable tools for water resource and flood hazard management and mapping, especially as the global availability and accuracy of terrain data increases. Digital terrain models implicitly contain information about floodplain landscape morphology that was produced by hydrologic processes over long time periods, as well as recent anthropogenic modifications to floodplain features and processes. The increased availability of terrain data and distributed hydrologic datasets provide an opportunity to develop hydrogeomorphic floodplain delineation models that can quickly be applied at large spatial scales. This research investigates the performance of a hydrogeomorphic floodplain model in two large urbanized and gauged river basins in the United States, the Susquehanna and the Wabash basins. The models were calibrated by a hydrologic data scaling technique, implemented through regression analyses of USGS peak flow data to estimate floodplain flow levels across multiple spatial scales. Floodplain model performance was assessed through comparison with 100‐year Federal Emergency Management Agency flood hazard maps. Results show that the hydrogeomorphic floodplain maps are generally consistent with standard flood maps, even when significantly and systematically varying scaling parameters within physically feasible ranges, with major differences that are likely due to infrastructure (levees, bridges, etc.) in highly urbanized areas and other locations where the geomorphic signature of fluvial processes has been altered. This study demonstrates the value of geomorphic information for large‐scale floodplain mapping and the potential use of hydrogeomorphic models for evaluating human‐made impacts to floodplain ecosystems and patterns of disconnectivity in urbanized catchments.     

Extraction of Lipids from Cereal Starches with Hot Aqueous Alcohols

Cereal starches were extracted at 100°C with various proportions of lower alcohols and water to establish optimum conditions. Lipid yields generally exceeding 90% were obtained with one two-hour extraction of maize starch at 100°C when using not less than 14 ml of 75–85% methanol, 10 ml of 75% ethanol, 12 ml of 74–78% n-propanol, 14 ml of 74–78% isopropanol, or 17 ml of 84% n-butanol per gram of starch. Similar results were obtained with wheat A-starch ( > 8 μm granule diameter), wheat B-starch ( < 8 μm granule diameter) and rice starch using n-propanol-water, and with rice starch using methanol-water. Yields decreased if the proportions of alcohol and water were not kept within well-defined limits, especially with butanol and ethanol. The preferred conditions for complete recovery of lipids were two 2-hour extractions and one 1-hour extraction at 100°C with not less than 16 ml of 75% n-propanol per gram of starch.     

Peat filter performance under changing environmental conditions

Peat is a candidate filter material for in situ treatment of urban runoff, contaminated groundwater and landfill leachates. Until now research has focused on peat sorption in batch experiments and there is a lack of knowledge on peat performance in filter beds. In this project column tests were carried out to evaluate the capacity of peat to remove As, Cd, Cu, Cr, Ni, Pb and Zn in multi-metal solution under a range of environmental conditions that may be encountered in real-life applications (draining, water stagnation, freezing, change in pH and metal concentrations, input of NaCl and elevated DOC). The removal capacity was 91–98% for Cd, Cu, Zn, Ni and Pb and the efficiency was unaffected by the changes of physical factors, but temporarily inhibited for solutions containing NaCl. Leaching of DOC from peat was detected in the initial samples and temporarily decreased metal removal. The peat filters showed high removal rates for Cd, Cu, Zn, Ni and Pb under all experimental conditions and are recommended for treatment of waters containing these elements. In contrast, peat was not found to be efficient for treatment of As and Cr in the multi-metal contaminated water at the pH range (6.7–8.0) studied.     

Dermal uptake of phthalates from clothing: Comparison of model to human participant results

In this research, we extend a model of transdermal uptake of phthalates to include a layer of clothing. When compared with experimental results, this model better estimates dermal uptake of diethylphthalate and di‐n‐butylphthalate (DnBP) than a previous model. The model predictions are consistent with the observation that previously exposed clothing can increase dermal uptake over that observed in bare‐skin participants for the same exposure air concentrations. The model predicts that dermal uptake from clothing of DnBP is a substantial fraction of total uptake from all sources of exposure. For compounds that have high dermal permeability coefficients, dermal uptake is increased for (i) thinner clothing, (ii) a narrower gap between clothing and skin, and (iii) longer time intervals between laundering and wearing. Enhanced dermal uptake is most pronounced for compounds with clothing–air partition coefficients between 10⁴ and 10⁷. In the absence of direct measurements of cotton cloth–air partition coefficients, dermal exposure may be predicted using equilibrium data for compounds in equilibrium with cellulose and water, in combination with computational methods of predicting partition coefficients.     

Membrane heat exchanger in HVAC energy recovery systems, systems energy analysis

The thermal performance of an enthalpy/membrane heat exchanger is experimentally investigated. The heat exchanger utilizes a 60gsm Kraft paper as the heat and moisture transfer surface for HVAC energy recovery. The heat exchanger sensible, latent and total effectiveness have been determined through temperature and moisture content measurements. The annual energy consumption of an air conditioner coupled with an enthalpy/membrane heat exchanger is also studied and compared with a conventional air conditioning cycle using in-house modified HPRate software. The heat exchanger effectiveness are used as thermal performance indicators and incorporated in the modified software. Energy analysis showed that an air conditioning system coupled with a membrane heat exchanger consumes less energy than a conventional air conditioning system in hot and humid climates where the latent load is high. It has been shown that in humid climate a saving of up to 8% in annual energy consumption can be achieved when membrane heat exchanger is used instead of a conventional HVAC system.     

Low resistive silicon substrate as an etch-stop layer for drilling thick SiO2 by spark assisted chemical engraving (SACE)

Controlling precisely the depth in glass micro-drilling by spark assisted chemical engraving (SACE) remains challenging, particularly for low depths. The possibility of using an electrically conductive material as an etch-stop layer for SACE gravity-feed drilling is investigated in this paper. Micromachining with constant DC and pulsed DC of 30–35 μm thick SiO₂ deposited on low resistive silicon substrate demonstrated the etch-stop function of the conductive silicon. Measurements of etch rates and hole profiles along with scanning electron microscope imaging revealed the mechanism underlying the etch-stop process. Low resistive silicon is demonstrated to be a good etch-stop layer for SACE gravity-feed drilling. Demonstration of machining of SiO₂ layer on silicon as a substrate and an etch-stop layer opens up new possibilities to adapt SACE for developing devices on silicon platform.