Child-centered game development (CCGD): developing games with children at school

Children represent an increasingly relevant target group of the game industry. Nevertheless, they are rarely involved in development processes. This article introduces child-centered game development (CCGD) approaches for the game design within the context of the school. Therefore, suitable HCI approaches from user-centered and participatory design as well as educational principles and approaches were used as a foundation. The CCGD approaches illustrate how to guide the involvement and participation of children aged 10–14 years in school classes within the development process of games. Approaches for the analysis, conceptualization, and design phases were developed and applied.     

Aktuelle Aktivitäten zu den europäischen Rohstoff-Initiativen

The European Initiatives manifested in the Communications of the European Commission on Raw Materials, in the Strategic Implementation Plan of the European Innovation Partnership on Raw Materials and in the 2014 Call of the European Institute for Innovation & Technology (EIT) for a Knowledge and Innovation Community (KIC) on Raw Materials lead to manifold Austrian activities on Government level and on level of the Montanuniversitaet Leoben. The ESEE Region, thus East- and Southeast Europe has a special role.     

Demonstration of the monolithic interconnection on CIS solar cells by picosecond laser structuring on 30 by 30 cm2 modules

In this paper, we present the selective structuring of all three patterns (P1, P2 and P3) of a monolithic interconnection of CIS (Cu(In,Ga)(S,Se)₂) thin film solar cells by picosecond laser pulses at a wavelength of 1064 nm. We show results for single pulse ablation threshold values and line scribing of molybdenum films on glass (P1), CIS on molybdenum (P2) and zinc oxide on CIS (P3). The purposes of these processes are the p‐type isolation (P1), cell interconnect (P2) and n‐type isolation (P3), which are required for complete cell architecture. The half micron thick molybdenum back electrode can be structured with a process speed of more than 15 m/s at about 15 W average power without detectable residues and damage by direct induced laser ablation from the back side (P1). The CIS layer can be structured selectively down to the molybdenum at process speeds up to 1 m/s at about 15 W average power, due to the precision of direct laser ablation in the ultrashort pulse regime (P2). The ZnO front electrode layer is separated by clean trenches with straight side walls at process speeds of up to 15 m/s at about 10 W average power, as a result of indirect induced laser ablation (P3). A validation of functionality of all processes is demonstrated on CIS solar cell modules (30 × 30 cm²). By replacing one state‐of‐the‐art process by a picosecond laser process at a time, solar efficiencies could be increased for P1 and P2 and stayed on a similar level for P3. After an optimization of the patterning processes in the R&D pilot line of AVANCIS, we achieved a new record efficiency for an all‐laser‐patterned CIS solar module: 14.7% as best value for the aperture area efficiency of a 30 × 30 cm² sized CIS module was reached. Copyright © 2014 John Wiley & Sons, Ltd.     

Hydrogen microscopy – Distribution of hydrogen in buckled niobium hydrogen thin films

Hydrogen absorption in thin metal films clamped to rigid substrates results in mechanical stress that changes the hydrogen's chemical potential by Δμ_H(σ) = −1.124σ kJ/mol_H for σ measured in [GPa]. In this paper we show that local stress relaxation by the detachment of niobium hydrogen thin films from the substrate affects the chemical potential on the local scale: using coincident proton–proton scattering at a proton microprobe, the hydrogen concentration is determined with μm resolution, revealing that hydrogen is not homogenously distributed in the film. The local hydrogen solubility of the film changes with its local stress state, mapping the buckled film fraction. In niobium hydrogen thin films loaded up to nominal concentrations in the two-phase coexistence region, the clamped film fraction remains in the solid solution phase, while the buckles represent the hydride phase. These results are compared to a simple model taking the stress impact on the chemical potential into account.     

Properties of Oleogels Formed With High‐Stearic Soybean Oils and Sunflower Wax

In an effort to develop alternatives for harmful trans fats produced by partial hydrogenation of vegetable oils, oleogels of high‐stearic soybean (A6 and MM106) oils were prepared with sunflower wax (SW) as the oleogelator. Oleogels of high‐stearic oils did not have greater firmness when compared to regular soybean oil (SBO) at room temperature. However, the firmness of high‐stearic oil oleogels at 4 °C sharply increased due to the high content of stearic acid. High‐stearic acid SBO had more polar compounds than the regular SBO. Polar compounds in oil inversely affected the firmness of oleogels. Differential scanning calorimetry showed that wax crystals facilitated nucleation of solid fats of high‐stearic oils during cooling. Polar compounds did not affect the melting and crystallization behavior of wax. Solid fat content (SFC) showed that polar compounds in oil and wax interfered with crystallization of solid fats. Linear viscoelastic properties of 7% SW oleogels of three oils reflected well the SFC values while they did not correlate well with the firmness of oleogels. Phase‐contrast microscopy showed that the wax crystal morphology was slightly influenced by solid fats in the high‐steric SBO, A6.     

Improvement of fuel properties of cottonseed oil methyl esters with commercial additives

The low temperature operability and oxidative stability of cottonseed oil methyl esters (CSME) were improved with four anti‐gel additives as well as one antioxidant additive, gossypol. Low temperature operability and oxidative stability of CSME was determined by cloud point (CP), pour point (PP), cold filter plugging point (CFPP), and oxidative stability index (OSI). The most significant reductions in CP, PP, and CFPP in all cases were obtained with Technol®, with the average reduction in temperature found to be 3.9 °C. Gunk®, Heet®, and Howe's® were progressively less effective, as indicated by average reductions in temperature of 3.4, 3.0, and 2.8 °C, respectively. In all cases, the magnitude of CFPP reduction was greater than for PP and especially CP. Addition of gossypol, a polyphenolic aldehyde, resulted in linear improvement in OSI (R² = 0.9804). The OSI of CSME increased from 5.0 to 8.3 h with gossypol at a concentration of 1000 ppm.     

Riparian Vegetation Mapping for Hydraulic Roughness Estimation Using Very High Resolution Remote Sensing Data Fusion

For detailed hydraulic modeling, accurate spatial information of riparian vegetation patterns needs to be derived in automatic fashion. We propose a supervised classification for heterogeneous riparian corridors with a low number of spectrally separate classes using data fusion of a Quickbird image and LIDAR data. The approach considers nine land cover classes including three woody riparian species, brush, cultivated areas, grassland, urban infrastructures, bare soil and water. The classical “stacked vector” approach is adopted for data fusion, while the nonparametric weighted feature-extraction method and the pixel-oriented maximum likelihood algorithm are used for feature-reduction and classification purposes, respectively. We test the approach over a 14-km stretch of the Sieve River (Tuscany Region, Italy). A one-dimensional river modeling is applied over the study reach comparing the results of a classification-derived hydraulic roughness map and a traditional ground-based approach. Despite the complex study reach, the classification method produced encouraging accuracies (OKS = 0.77) and represents a useful tool to delineate application domains of flow resistance models suited to different hydrodynamic patterns (e.g., stiff/flexible vegetation). Hydraulic modeling results showed that the remotely derived floodplain roughness parameterization captures the equivalent Manning coefficient over 20 test cross sections with uncertainty distributions described by low mean and standard deviation values.