A rate adaptive bit-loading algorithm for in-building power-line communications based on DMT-modulated systems

This paper deals with a variable rate discrete multitone modulation system for broadband power-line communications, based on the bit-loading algorithm proposed by Leke and Cioffi. In the proposed system a suitable least mean square channel estimator is considered, which is based on the insertion of a training sequence (TS). The proposed approach will be compared with the ideal channel estimates, showing its effectiveness. Moreover, different TS lengths will be compared. The system performance, expressed in terms of bit rate and bit-error rate, is derived by simulation with and without estimation errors. The propagation environment has been assumed as a frequency-selective multipath fading channel with additive colored Gaussian noise, according to the in-building networks model.     

All-Optical Vestigial Sideband Generation Using a Semiconductor Optical Amplifier

An all-optical setup to generate vestigial sideband signals based on self-phase modulation in a semiconductor optical amplifier is experimentally demonstrated at 10 Gb/s. Sideband suppressions higher than 15 dB are reported with improved eye opening. Wavelength-independent operation over 26 nm is demonstrated. Increased chromatic dispersion tolerance is verified: a receiver sensitivity penalty of 5.3 dB, relative to back-to-back, is obtained after transmission over 2720 ps/nm; whereas conventional double sideband is penalized by 4.0 dB after 1360 ps/nm     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

Discrete-time spare ordering policy with randomized lead times and discounting

The paper considers a generalized discrete‐time order‐replacement model for a single unit system, which is subject to random failure when in operation. Two types of discrete randomized lead times are considered for a spare unit; one is for regular (preventive) order and another is for expedited (emergency) order. The model is formulated based on the discounted cost criterion. The underlying two‐dimensional optimization problem is reduced to a simple one‐dimensional one and then the optimal ordering policy for the spare unit is characterized under two extreme conditions: (i) unlimited inventory time and (ii) zero inventory time for the spare unit. A numerical example is used to determine the optimal spare‐ordering policy numerically and to examine the sensitivity of the model parameters.     

Microbial conversion of selected azo dyes and their breakdown products.

Four selected azo dyes (acid orange 6, acid orange 7, methyl orange and methyl red) were completely decolourised in the presence of anaerobic granular sludge, while only methyl red was degraded in aerobic conditions using a conventional activated sludge. Additional experiments with culture broth devoid of cells showed that anaerobic decolourisation of azo dyes was performed by extracellular reducing agents produced by anaerobic bacteria. This was further confirmed by abiotic experiments with sulphide and NADH. The presence of redox mediators such as riboflavin led to dramatic acceleration of the anaerobic biodecolourisation process. The azo dye reduction products were found to be sulphanilic acid and 4-aminoresorcinol for acid orange 6; sulphanilic acid and 1-amino-2-naphthol for acid orange 7; N,N-dimethyl-1,4-phenylenediamine and sulphanilic acid for methyl orange; and N,N-dimethyl-1,4-phenylenediamine and anthranilic acid for methyl red. Anaerobic toxicity assays showed that the azo dyes were more toxic than their breakdown products (aromatic amines), except 1-amino-2-naphthol. In the presence of activated sludge, only anthranilic acid was completely mineralised while sulphanilic acid was persistent. 4-aminoresorcinol, 1-amino-2-naphthol and N,N-dimethyl-1,4-phenylenediamine underwent autooxidation in aerobic conditions yielding coloured polymeric products. On the contrary, in the presence of granular methanogenic sludge, 4-aminoresorcinol, 1-amino-2-naphthol and anthranilic acid were quantitatively methanised, sulphanilic acid was partially (70%) mineralised while N,N-dimethyl-1,4-phenylenediamine was only demethylated producing 1,4-phenylenediamine as an end product.     

Neuronet Data Processing on the State of an Object After an Emergency

Neuronets are considered for processing data on the state of a potentially hazardous object after an emergency. An example is given of processing the data on the state of a potentially hazardous object in increments.Translated from Izmeritel’naya Tekhnika, No. 3, pp. 6–8, March, 2005.     

Human-centered multimedia: culture, deployment, and access

Cultural setting is an intrinsic part of what we're trying to capture and use in muitimedia systems. However, being in our own culture (both everyday culture and professional culture) we forget that multimedia interfaces and communication are culture-specific. This article gives some great insights that stem from diversity in countries (and cultures) as well as inside the interdisciplinary multimedia community.     

Remediation of zones of local radioactive contamination

A methodology remediating zones of local radioactive contamination is presented. It is based on a classification of the zones taking account of the contribution of external and internal irradiation to the total dose load to the public. The criteria for identifying such loads and the steps required for their remediation are identified. A radiation-ecological validation of the decrease in the external irradiation dose to the public in zones of local radioactive contamination is given. __________ Translated from Atomnaya énergiya, Vol. 100, No. 2, pp. 125–134, February, 2006.     

Modeling of two-dimensional photonic crystal resonant cavities incorporating elliptically shaped dielectric cylinders

Modeling of photonic crystal structures is an ongoing challenge. This letter is devoted to the theoretical modeling of photonic crystal resonant cavities, composed of elliptically shaped dielectric pillars. Through this rigorous study, we can examine the impact of the elliptical-shape deformations to important quantities related to the photonic crystal cavity performance, such as the quality factor and the resonance frequency.