Dependence of critical current density on microstructure and processing of high-Tc superconductors

Microstructural origins for reduced weak-link behavior in high-J_c melt-processed YBCO, spray pyrolyzed thick films of Tl-1223, metallic precursor Y-124 polycrystalline powder-in-tube (PIT) wires and PIT Bi-2212/2223 are discussed. Since the materials studied are the highest J_c, polycrystalline, high-T_c superconductors fabricated worldwide, the results provide important guidelines for further improvements in superconducting properties, thereby enabling practical applications of these materials. It is found that strongly linked current flow within domains of melt-processed 123 occurs effectively through a single crystal path. In c-axis oriented, polycrystalline Tl-1223 thick films, local in-plane texture has been found to play a crucial role in the reduced weak-link behavior. Formation of “colonies” of grains with a common c-axis and modest in-plane misorientation was observed. Furthermore, a colony boundary in general has a varying misorientation along the boundary. Large regions comprised primarily of low angle boundaries were observed. Percolative transport through a network of such small angle boundaries appears to provide the nonweak-linked current path. Although powder-in-tube BSCCO 2212 and 2223 also appear to have a “colony” microstructure, there are some important differences. Colonies in BSCCO consist of stacks of grains with similar c-axis orientation in contrast to colonies in Tl-1223 films where few grains are stacked on top of one another. Furthermore, most grains within a colony in BSCCO have the same lateral dimensions as that of the colony, resulting largely largely in “twist” boundaries. Further microstructural characterization of high-J_c PIT 2212 and 2223 is currently underway. In the case of Y-124 wires, weak macroscopic in-plane texture is found. Additional measurements are underway to determine if a sharper, local in-plane texture also exists. It is found that in three of the four types of superconductors studied, reduced weak-link behavior can be ascribed to some degree of biaxial alignment between grains, either on a “local” or a “global” scale.     

Residual vector quantization using a multilayer competitive neuralnetwork

This paper presents a new technique for designing a jointly optimized residual vector quantizer (RVQ). In conventional stage-by-stage design procedure, each stage codebook is optimized for that particular stage distortion and does not consider the distortion from the subsequent stages. However, the overall performance can be improved if each stage codebook is optimized by minimizing the distortion from the subsequent stage quantizers as well as the distortion from the previous stage quantizers. This can only be achieved when stage codebooks are jointly designed for each other. In this paper, the proposed codebook design procedure is based on a multilayer competitive neural network where each layer of this network represents one stage of the RVQ. The weight connecting these layers form the corresponding stage codebooks of the RVQ. The joint design problem of the RVQ's codebooks (weights of the multilayer competitive neural network) is formulated as a nonlinearly constrained optimization task which is based on a Lagrangian error function. This Lagrangian error function includes all the constraints that are imposed by the joint optimization of the codebooks. The proposed procedure seeks a locally optimal solution by iteratively solving the equations for this Lagrangian error function. Simulation results show an improvement in the performance of an RVQ when designed using the proposed joint optimization technique as compared to the stage-by-stage design, where both generalized Lloyd algorithm (GLA) and the Kohonen learning algorithm (KLA) were used to design each stage codebook independently, as well as the conventional joint-optimization technique     

ATM-based transport architecture for multiservices wirelesspersonal communication networks

This paper presents an ATM-based transport architecture for next-generation multiservices personal communication networks (PCN). Such “multimedia capable” integrated services wireless networks are motivated by an anticipated demand for wireless extensions to future broadband networks. An ATM compatible wireless network concept capable of supporting a mix of broadband ISDN services including constant bit-rate (CBR), variable bit-rate (VBR), and packet data transport is explored from an architectural viewpoint. The proposed system uses a hierarchical ATM switching network for interconnection of PCN microcells, each of which is serviced by high-speed, shared-access radio links based on ATM-compatible cell, relay principles. Design issues related to the physical (modulation), media access control (MAC), and data-link layers of the ATM-based radio link are discussed, and preliminary technical approaches are identified in each case. An example multiservice dynamic reservation (MDR) TDMA media access protocol is then considered in further detail, and simulation results are presented for an example voice/data scenario with a proportion of time-critical (i.e., multimedia) packet data. Time-of-expiry (TOE) based queue service disciplines are also investigated as a mechanism for improving the quality-of-service (QoS) in this scenario     

Call control and traffic transport for connection-oriented highspeed wireless personal communications over metropolitan area networks

A distributed circuit-switched approach for supporting the deployment of high speed wireless personal communication services in urban areas through the interconnection of base stations via metropolitan area networks (MANs) is proposed. Broadband MANs minimize traffic congestion by dynamic sharing of link capacity and by serving as distributed switches for partitioning call control functions. While the DQDB protocol readily supports distributed packet-switching over the IEEE 802.6 MAN, isochronous traffic such as voice and video is best supported by circuit-switched connections. The authors present an enhanced bi-state pre-arbitrated (PA) transport mechanism, and associated call control and handoff management techniques, which enable distributed circuit-switching over the MAN. These capabilities are not currently addressed in the 802.6 standards. The bi-state PA transport mechanism facilitates statistical multiplexing of variable rate isochronous traffic sources. The network capacity is constrained by the call setup delay performance, and is analyzed by simulations. Alternative signaling architectures, involving different placements of call control network elements, are evaluated. The effects of erasure nodes, and close bus versus open bus architectures, are considered. The overlap inter-MAN call setup procedure is proposed to reduce delays. Different call handoff procedures are formulated according to the type of handoff and the resulting change in call connectivity. Most handoffs are intra-MAN, requiring simple procedures with short delays     

Does marital conflict cause child maladjustment? Directions and challenges for longitudinal research.

Although the association between marital conflict and child adjustment problems has been well documented, there is no empirical evidence that conflict actually causes maladjustment. The investigation of causation requires theoretically and empirically informed longitudinal research. Two topics are addressed to facilitate such research. First, how marital conflict may lead to adjustment problems is outlined, with a focus on constructs that are likely to be critical to any theory on this topic. Second, several issues are identified that need to be addressed in longitudinal research on the mechanisms underlying the link between marital and child problems. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A 20-Gb/s silicon bipolar 1:4-demultiplexer IC

This paper presents a 20-Gb/s 1:4-demultiplexer for future fiber-optic transmission systems. It uses an 0.4-μm emitter double polysilicon 21-GHz f_T Si bipolar foundry process. This is the highest data rate of a 1:4-DEMUX reported so far in any technology. The 1:4-DEMUX features a tree-type architecture with one frequency divider and a channel switch circuit. The circuit design was carefully optimized to achieve high speed and moderate power dissipation. It consumes 1.4 W with a single -4.5-V supply     

Behavioral preferences in response to social injustice: The effects of group permeability and social identity salience.

Examined features of an intergroup context that can affect people's preferred responses to a situation of social injustice. 90 undergraduates were randomly assigned to 1 of 3 conditions of group permeability (open, token, or closed) and 1 of 2 conditions of social identity salience (not salient or salient). It was predicted on the basis of social identity theory that individualistic responses would be preferred to a collective response when group boundaries were more open but not when they were closed. It was also expected that under conditions of group impermeability, collective behavior would be preferred to a greater extent by individuals for whom social identity was salient than by individuals for whom it was not salient. The results, which generally supported these hypotheses, are discussed in terms of social psychological theories of intergroup relations and also with regard to their potential practical implications. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Reply to Humphreys: On the compatibility of twelve-step programs and psychotherapy.

Comments on K. Humphreys's (see record 1994-34917-001) article discussing the limitations of integrating psychotherapy and 12-step programs. Humphreys's arguments based on the approaches' purported differences in helping values are not logically demonstrated or empirically determined. Therapists should be trained to deal with spiritual issues and perspectives in a respectful and knowledgeable way. (PsycINFO Database Record (c) 2010 APA, all rights reserved)