Study of 18-cm long single-sided AC-coupled silicon microstripdetectors

The SSC GEM silicon Central Tracker design incorporated 18-cm long single-sided AC-coupled silicon microstrip ladders. Compared to the 12-cm long ladders considered in the preliminary stages of the tracker design, the 18-cm long ladders have the advantage of reduced cost, channel count and overall power consumption, and led to a simplified tracker assembly. However, such long ships also present the challenge of maintaining satisfactory performance. The increased capacitance and series resistance contribute to lower signal-to-noise ratios, longer time walk, higher power consumption per channel and increased probability of crosstalk to neighboring channels. In this paper, an accurate method to calculate the geometric capacitance of the AC-coupled microstrips is presented and the calculated results are compared with measurements, SPICE simulations are performed to predict the noise, the extent of interstrip capacitive coupling and the dispersion of the detector signal due to the finite series resistance of the metal strips and the long length of the detector. The influence of the preamplifier current and the shaping time on the signal and noise levels is also presented. The study concludes that the 18-cm long ladders can successfully satisfy the performance goals of the GEM silicon Central Tracker     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Extinction of dispersed heterogeneous systems

We consider extinction of various dispersed systems. Isolated boron particles and boron particles in gases are studied. Stability analysis of steady-state thermal regimes of reacting heterogeneous systems for the case of two parallel reactions on the reaction surface using the Frank-Kamenetskii method gives extinction conditions in oxygen-containing media. Curves of the extinction particle size versus the ambient temperature, oxidizer concentration, and, for particles in gases, also versus the oxidizer-to-fuel ratio are plotted. Approximate analytical calculations showed that the extinction process can be most actively controlled by varying the combustion temperature: a decrease in the latter increases the extinction particle size and decreases the completeness of fuel combustion. It is shown that at low ambient temperatures the extinction particle size for suspensions is larger than that for isolated particles. This effect is caused by a decrease in the oxidizer concentration during combustion of suspensions. At high temperatures, the role of this factor weakens.Translated from Fizika Goreniya i Vzryva, Vol. 32, No. 6, pp. 12–19, November–December, 1996.     

Modeling electromigration lifetime under bidirectional currentstress

Electromigration reliability of interconnect under bidirectional current stress has been studied in a wide frequency range (mHz to 200 MHz). Experimental results show that the AC lifetime rises with the stress current frequency. The current density exponent and the activation energy of AC lifetime are found to be twice that of DC lifetime. Pure AC current stress failure at extremely high current density is believed to result from thermal migration of metal at hot/cold transition points     

Superconductivity in nearly single-phase Bi-Pb-Sr-Ca-Cu-O samples with different nominal compositions

The preparation conditions, phase composition, and superconducting properties of Bi-Pb-Sr-Ca-Cu oxide materials from different nominal compositions have been investigated. Nearly single-phase samples from Bi₂Pb_0.4Sr₂Ca₃Cu₄O _y , as well as from the proposed compositions Bi_1.8Pb_0.4Sr₂Ca₃Cu₄O _y and Bi_1.8Pb_0.4Sr₂Ca_2.5Cu_3.5O _y were obtained by a solid-state reaction in air. Samples with the third nominal composition showed the best superconducting properties (T _on=111 K and zero resistance atT ₀=103 K). A possible mechanism for the 2223 phase formation in the three investigated compositions has been discussed.     

Computer-intensive methods in statistical analysis

As far back as the late 1970s, the impact of affordable, high-speed computers on the theory and practice of modern statistics was recognized by Efron (1979, 1982). As a result, the bootstrap and other computer-intensive statistical methods (such as subsampling and the jackknife) have been developed extensively since that time and now constitute very powerful (and intuitive) tools to do statistics with. This article provides a readable, self-contained introduction to the bootstrap and jackknife methodology for statistical inference; in particular, the focus is on the derivation of confidence intervals in general situations. A guide to the available bibliography on bootstrap methods is also offered     

Project for the development of an ambulatory and semi-ambulatory community center for the third age

A case of osteoid osteoma of the scaphoid was discovered, in the absence of radiological (conventional and CT-scan) alterations. MRI findings were not conclusive.     

Conservation laws and shock waves in the theory of relaxation heat transfer

A set of divergent forms of heat-transfer equations are presented. New laws are established that govern the behavior of the temperature field behind the front of a strong discontinuity. Comparison of theoretical and experimental data on the propagation of nonlinear waves in a sapphire crystal and liquid helium is carried out. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 2, pp. 318–325, March–April 1997.