Bestimmung von Schwermetallen in Ölen,Fetten und Futtermitteln

Determination of Heavy Metal Traces in Oils, Fats and Feeding-Stuffs Atomic absorption spectroscopy has proved to be the best method for the determination of lead, cadmium and mercury in fats, oils and feeding-stuffs, whereas colorimetry is best for the determination of arsenic. For each substrate the most suitable digestion method is described. Recoveries and detection limits of the determination methods are shown.     

Periclase —spinel products from magnesite powder with high alumina content

Conclusions Periclase-spinel articles with low contents of chromite made from magnesite powder containing magnesia-alumina spinel have a high range of physicochemical properties (except spalling resistance) and completely satisfy the requirements in service for the roofs of open-hearth and walls of electric steel-melting furnaces.With an increase in the content of magnesite in the fine constituent, it is possible to obtain products of the same quality from magnesite powder with a high porosity (up to 20–23%).The change in ratio of chrome spinel and magnesia-aluminous spinel in the periclase-spinel articles toward a certain increase in the latter is worthy of attention and requires further investigation.Translated from Ogneupory, No. 2, pp. 11–15, February, 1966.     

Study of mass transfer in a sheet glass furnace with boiling in the melting zone

The results of a luminescent indicator study of the conditions of neutralization of a glass melt in sheet glass furnaces equipped with boiling systems are reported. It was shown that the process of dilution of the indicator improved significantly in the furnace with boiling, and this began immediately after the indicator entered the furnace. After the boiling system was mastered, the mass transfer parameters of the furnace in production of sheet glass increased by 15–20%.Translated from Steklo i Keramika, Nos. 5–6, pp. 11–13, May–June, 1994.     

Cu2O/Cu Cermet as a Candidate Inert Anode for Al Production

Cu₂O/ x Cu ( x =0–25 wt%) cermets were evaluated as a novel partially inert anode for aluminum (Al) production. The physical and mechanical properties, including the compressive strength, flexural strength, thermal expansion coefficient, thermal conductivity, and dc electrical conductivity were tested at room temperature and at temperatures up to 950°C. The coefficient of thermal expansion, compressive strength, flexural strength, thermal conductivity, and electrical conductivity of Cu₂O/Cu cermets increased with increasing Cu content. High-temperature electrical conductivity measurements showed that with increasing temperature, the electrical conductivity increased when the Cu content was below the percolation threshold, while it decreased when the Cu content was above the percolation threshold. A relatively stable CuAlO₂ layer formed on the cermet surface during electrochemical testing, and the corrosion rate of this anode was estimated to be about 1.8–1.9 cm/year in Al production.     

The search for optimum solutions for melting insulator glass

The effect of the temperature conditions of melting and the design features of the glass melting furnaces on the increase in the specific removal of glass melt in processing quenched insulating parts of high-voltage suspension insulators is demonstrated. Designs are proposed for glass melting furnaces and glass melting temperature regimes whose use will increase the economy of manufacturing insulators.     

Use of Periclase-Carbon Refractories for the Lining of 385-Ton Steel-Teeming Ladles for a Furnace-Ladle Unit Installed in an Oxygen-Converter Shop at the Magnitogorskii Metal-And-Steel Works Joint-Stock Co.

Refractories and Industrial Ceramics -     

Polyacrylic acid macromolecule—complexed zinc phosphate crystal conversion coatings

When water-soluble polyacrylic acid (PAA) macromolecules are introduced into zinc phosphating liquids, significant improvements in the yield of conventional zinc phosphate conversion films deposited on carbon steel surfaces are obtained. The improvements include controllability of crystal dimensions, degree of crystallinity, and coating weight. The conversion layer formed is a composite microstructure consisting of a bulk PAA polymer and complexed PAA continuously overlaying a uniform array of fine dense zinc phosphate crystals. Interfacial studies of the composite layer using infrared spectroscopy, energy-dispersive X-ray spectrometry associated with scanning electron microscopy, and X-ray photoelectron spectroscopy indicated that the functional carboxylic acid groups in the PAA molecules were strongly chemisorbed by the Zn atoms at the outermost surface sites of the crystal layers. The intermolecular bridging action of the surface Zn atoms which connect the PAA and the zinc phosphate crystal layers results in good adhesion at the PAA–crystal interfaces. In addition, the plasticized complex formation plays an essential role in increasing the stiffness and the ductility of the normally conventional crystal films. The flexibility of the complex coating surface and the thickness and surface roughness of the thin PAA overlayer all affect the adhesive force at the interface between the organic polymer topcoat and the complexed coating.     

Corundum-zircon crucibles for induction melting of nickel alloys

Refractories and Industrial Ceramics -     

Development of monolithic catalysts with low noble metal content for diesel vehicle emission control

Topics in Catalysis - Monolith washcoated catalysts with potential for diesel emission control have been developed. Two types of catalysts have been prepared for further study: (1) MnO x supported...