Three-Phase Induction Generator for Single-Phase Line

Hydroelectric generators of less than 20 kilowatts can be in remote areas served only by a single-phase line. For high efficiency and low cost, a three-phase induction generator should be used. This three-phase generator can operate with balanced voltages and currents when the ``phase-splitting' circuit uses two capacitors connetted to two different single-phase voltage sources.     

Convective transfer processes in chemically stable and reacting liquids with an internal structure

Dynamic processes are studied in media with softly and hardly internal destroyable configurations. A method is examined for the measurement of properties of media with spatial separation of the chemical transformation stages and thermal hydrodynamic measurements.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 53, No. 5, pp. 781–789, November, 1987.     

Differential gastric ulceration in rats receiving shocks on either fixed-time or variable-time schedules.

Research suggests that predictable electric shocks produce less stress than unpredictable shocks. In this experiment, predictability was manipulated by using fixed-time (FT, predictable) and variable-time (VT, unpredictable) schedules of shock delivery. Rats receiving 3-mA, 1-s electric shocks on a FT 45-s schedule developed less gastric pathology than another group that was administered identical shocks on a VT 45-s schedule. It is argued that this finding represents a more subtle effect of predictability than has been obtained heretofore. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Novel Nakagami-m parameter estimator for noisy channel samples

A novel moment-based m parameter estimator using noisy channel samples is derived. This estimator is simpler than known estimators. Numerical results are presented to demonstrate that, under some practical fading conditions, it outperforms previous estimators.     

Hydrothermal corrosion of magnesiapartially-stabilized zirconia

Changes in the phase compositions and microstructures of magnesia-partially-stabilized zirconia (Mg-PSZ) were studied in water at 80–300 °C, 1 m HCl solutions at 80–140 °C and 1 m CH₃COOH-CH₃COONa buffer solutions at pH 3 and 80–140 °C for 10–40 days. The tetragonal to monoclinic phase transformation and the degradation of the fracture strength occurred in water above 200 °C. On the other hand, although no noticeable tetragonal to monoclinic phase transformation proceeded in 1 m HCl solutions and 1 m CH₃COOH-CH₃-COONa buffer solutions at pH 3 below 140 °C, the fracture strength of Mg-PSZ greatly degraded. The dissolution of Mg²⁺ ion was observed in water above 200 °C and in 1 m HCl solutions above 80 °C.     

Fabrication of Strain-Relaxed Si<Subscript>1 − <Emphasis Type="Italic">x</Emphasis></Subscript>Ge<Subscript>x</Subscript>/Si(001) Buffer Layers of Low Surface Roughness

The results are presented of the fabrication of strain-relaxed graded Si_{1 − x} Ge_x/Si(001) buffer layers with a maximum Ge fraction of about 0.25 that have a low density of threading dislocations (<10⁶ cm⁻²) and low surface roughness. The buffer layers are grown by atmospheric-pressure hydride CVD. It is found that chemical mechanical polishing can reduce their surface roughness to a level comparable with that of the original Si(001) substrates. It is shown that the polished buffer layers can serve as substrates for MBE-grown SiGe/Si heterostructures.__________Translated from Mikroelektronika, Vol. 34, No. 4, 2005, pp. 243–250.Original Russian Text Copyright © 2005 by Vostokov, Drozdov, Krasil’nik, Kuznetsov, Novikov, Perevoshchikov, Shaleev.     

Autoscan: a scan design without external scan inputs or outputs

We propose a design-for-testability technique for synchronous sequential circuits called autoscan. Autoscan uses scan chains similar to conventional scan. However, it gives up the external scan inputs and outputs in order to eliminate the test data volume associated with them. Scan operations under autoscan improve the circuit testability by allowing the circuit state to be modified through shifting. Due to the removal of the scan inputs and outputs, synthesis of scan chains under autoscan does not have to satisfy all the constraints imposed on conventional scan chains. We describe a synthesis procedure for autoscan chains, and demonstrate that autoscan allows us to detect almost all the faults that are detectable using conventional scan. We use random sequences in order to show that sequential test generation is not necessary under autoscan. We also describe a test generation procedure, and discuss the effect of autoscan on fault diagnosis.     

Force criteria of the state of limiting equilibrium of a cracked plate under biaxial loading

We deduce the theoretical formula taking into account the influence of biaxial loading of a plate weakened by a crack on the stress intensity factor K _I. This enables us to compute the characteristic of crack resistance K _c according to the known boundary forces. __________ Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 43, No. 6, pp. 14–16, November–December, 2007.     

Results of testing a centrifugal bubble singlet-oxygen generator

The results of parametric tests of a centrifugal bubble singlet-oxygen generator based on the reaction of chlorine with an alkaline hydrogen peroxide solution have been given. The utilization of chlorine grows with bubble-layer height, whereas the relative content of O₂(¹Δ) remains constant. Growth in centrifugal acceleration leads to a more efficient utilization of chlorine. A specific oxygen output of more than 1 mmole·cm⁻²·sec⁻¹ from the bubble layer for a degree of chlorine utilization of ∼95% and a singlet-oxygen yield of more than 50% has been attained. It has been shown that a centrifugal bubble singlet-oxygen generator is an efficient energy source for an oxygen-iodine laser. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 3, pp. 121–128, May–June, 2007.