MoO3掺杂Ba0.98Bi0.02(Ti0.9Zr0.1)O3陶瓷的介电性能研究

采用固相反应法制备了Ba<,0.98>Bi<,0.02>(Ti<,0.9>Zr<,0.1>)<,1-x>Mo<,x>O<,3>(x=0,0.01,0.03,0.05)陶瓷,研究了MoO<,3>掺杂对Ba<,0.98>Bi<,0.02>(Ti<,0.9>Zr<,0.1>)O<,3>陶瓷的相结构、表面形貌和介电性能的影响....     

基于FET结构的Pt-LaF_3混合膜溶解氧传感器

研制了一种基于 FET结构的 Pt- L a F3混合膜全固态溶解氧传感器 .对 Pt- L a F3敏感膜的敏感机制以及传感器的器件结构和响应特性进行了分析 ,并实际测试了器件特性 ,给出了在不同工作点和不同温度条件下器件的输出电压对溶解氧浓度变化的响应曲线     

基于集对分析的敌空袭目标排序

基于集对分析理论,提出敌空袭目标排序的判断模型.通过建立待评估方案决策矩阵,构造理想方案;运用层次分析法确定评价指标权重,形成待评估方案和理想方案联系矩阵;对各项指标值与其相应权重系数线性叠加合成,以同一度大小对备选方案排序选优.该方法为敌空袭目标排序判断提供了简单、实用的评价方法.实例分析验证说明该方法准确可行.     

表面裂纹深度检测的非接触光声检测技术研究

提出了一种基于激光超声宽带透射系数和的表征参数,实现了表面裂纹深度的定量检测。通过有限元仿真与实验测量方法,从时域和频域分析了激光产生的瑞利波与表面裂纹的相互作用机制,采用宽带透射系数和作为表征裂纹深度的物理参数,并建立了其与表面缺陷深度之间的拟合方程。结果表明,脉冲激光产生的瑞利波对金属表面裂纹深度变化十分敏感,所提出的计算方法可用于精确判断表面裂纹的深度。本文研究成果可为工件表面裂纹的非接触检测提供潜在应用。     

太阳能聚光器薄膜的牢固度理论和制备技术

针对太阳能聚光器薄膜在制备过程中牢固度不理想这一问题，确定在薄膜的生长过程中影响薄膜牢固度的各个因素，对这些因素作了具体的分析，并在实验的基础上，给出了提高薄膜牢固度的具体措施。     

2008版ISO9001中7.6的变化与理解

2008版的ISO9001中的7.6变化不大,只是稍有修改,我对该条款的理解有以下几点: 1)将7.6的题目由<监视和测量装置的控制>改为<监视和测量设备的控制>.之所以将"装置"改为"设备",这可能与该标准的术语和定义引用有关,将"装置"改为"设备"就与中3.10.4测量设备(measuring equipment)一致了.     

An atmospheric correction procedure for the ATSR-2 visible and near-infrared land surface data

An atmospheric correction procedure for the solar reflecting channels of the Second Along Track Scanning Radiometer (ATSR-2) is described in which the aerosol optical thickness is retrieved from atmospheric simulations using the top-of-atmosphere (TOA) reflectances. The aerosol optical thickness is obtained when the ratio of the corresponding surface reflectances, in the off-nadir view to the nadir view, for two selected sensor channels, are equal. Directional reflectance models have been used to determine the validity of this approach and to determine suitable channel combinations. Simulations of the procedure for realistic surfaces indicate the retrieval of tau A 550 is better than 0.1 when the aerosol meteorology is known. The accuracy of the retrieval of surface reflectance is significantly affected by deviations from the expected aerosol meteorology. Factors affecting the accuracy of the correction procedure are described.     

APl000主管道的国产化试制和制造许可证审评

描述了APl000主管道的制造技术要求，对国内近期APl000主管道热段的研制情况进行了综述，介绍了目前APl000主管道制造许可证的申请和颁发情况。     

In situ MTBE biodegradation supported by diffusive oxygen release

Microcosm studies with sediments from Vandenberg Air Force Base, CA, suggest that native aerobic methyl tert-butyl ether (MTBE)-degrading microorganisms can be stimulated to degrade MTBE. In a series of field experiments, dissolved oxygen has been released into the anaerobic MTBE plume by diffusion through the walls of oxygen-pressurized polymeric tubing placed in contact with the flowing groundwater. MTBE concentrations were decreased from several hundred to less than 10 microg/L during passage through the induced aerobic zone, due apparently to in situ biodegradation: abiotic MTBE loss mechanisms were insignificant. Lag time for initiation of degradation was less than 2 months, and the apparent pseudo-first-order degradation rate was 5.3 day(-1). Additional MTBE was added in steps to raise the influent concentration to a maximum of 2.1 mg/L. With each step, MTBE was degraded within the preestablished aerobic treatment zone at rates ranging from 4.4 to 8.6 day(-1). Excess dissolved oxygen suggested that even higher MTBE concentrations could have been treated. Continued flow through the treatment zone was repeatedly confirmed through tracer and other tests. These and others' results suggest that it is possible to create permeable in situ treatment zones solely by releasing oxygen to support native microbial degradation of MTBE.     

真空断路器永磁机构计算与分析

在介绍了高压断路器的双稳态永磁机构结构及工作原理的基础上，对其涡流电磁场方程进行了描述，研究了电流源激励下的瞬态磁场，并推导出考虑涡流情况下的非线性瞬态磁场数学模型，建立出永磁机构动态方程.采用耦合法，并且应用了ANSYS软件进行编程来对永磁机构的瞬态场进行计算，对它的线圈电流、动铁芯位移及受力进行分析，并研究了涡流效应对永磁机构的影响，得出应选择电导率小，电磁性能好和损耗低的导磁材料的结论.